Beelink S82/S82H/M8/MXIII & Tronsmart S89/S89H - Finless 2.0 ROM

[CChris]

Is finless bob still supporting this device?  I see from tronsmart there is a 112k4 release mar2015, no lollipop release on their website.  Is 112k4 worth updating from finless 2.1 (109k4 base)?

[Zhuinden]

Well, this is my first use of 4.4 so I cannot speak to what I KNOW should be there, just what I imagine exists.

- Screensaver options
- Display options (wallpaper, etc)
- Sound options further than just volume levels

In general the settings are much less than were with 4.2.

Hello, I have just found that DAYDREAM can be set by enabling Screen Saver in the Mediabox Settings, and also you can set the actual DAYDREAM by using the Settings Widget -> Daydream option.

[ASW1]

Might be a hardware issue.
Try wiggle the hdmi cable at the back of your box a bit to see if you get a signal.

[florian83260]

I ! I have a problem, I haven't put my box on since a few month and now when I put on I have a black screen. What shall I do ?

[Finless]

Bob i have wiped my data and factory reset and I cant seem to get rid of my old xbmc lol .. im gonna try going to stock oman then back to u clean memory is over 60 on 2.1

Remember the stock ROM installs the Oman XBMC automatically. Maybe that is your problem?
If there is a APK in /system/preinstall or on stock ROM /system/usr then it's going to get installed after every wipe.

Bob

[londonshore]

Beelink S82/S82H/M8/MXIII & Tronsmart S89/S89H - Finless 2.0 ROM

All my ROMs format /data so if you just install the 2.0 ZIP you will be fine. No need to also wipe but you can if you like.

Bob

Bob i have wiped my data and factory reset and I cant seem to get rid of my old xbmc lol .. im gonna try going to stock oman then back to u clean memory is over 60 on 2.1

[Finless]

All my ROMs format /data so if you just install the 2.0 ZIP you will be fine. No need to also wipe but you can if you like.

Bob

[ASW1]

I am currently running finless 2.1
unfortunately this is not as stable as the stock firmware 109k4 that I was running before.
I get freezes quite often when playing live TV over my PVR add-on, they only happen since I flashed this rom.

So I want to go back to finless 2.0
Can I just boot into TWRP, do a data/cache/dalvik wipe, and flash the 2.0 zip, or what would be the exact procedure here?

[rottenrolla]

OK folks so the 109K4 came out a week ago.

About the same stuff I do to my ROMs but this time I did not have to do everything as Oman is now putting much of my patches in the stock ROM!
But not everything as you can see below.


____________________________________

This is based on the S82/S89 109K4 ROM.

This is for the following devices:
- Tronsmart S89 and S89-H
- Beelink S82 and S82-H
- Beelink M8 (black and red round box)
- Beelink MXIII 2GB


This IS NOT for the ENY/Acemax EM8 square box!!!


____________________________________

Features and release notes for my 2.0 ROM:

1) 109K4 was now rooted from the factory! So I did not need to root it this time

2) Updated Google framework core files. The ones in the stock ROM were out of date.
On first boot NOTHING will need to be updated once you logon to Google Play.
That is as of this date.

3) Debloated of junk APPs and Google Apps you can get from Google Play.
There was quite a few useless hidden apps in this KitKat release! Some of them did not even work.
I did remove XBMC and other pre-install APPs as well. I like a CLEAN ROM that you the user can setup the way you want. Having APPs in /system leaves that junk in there forever (unless you delete them by hand with a root explorer).
NOTE: The XBMC that came with 109K4 is in this ZIP package (Oman modified). Feel free to install it if you like.

4) As always, full init.d support! If you do not know what that is... ignore it. For geeks that want to use it. It is there!
This time around due to updated security in 4.4, init.d was a lot harder to get working.
Again I had to figure it out!

5) I fixed the AOSP Launcher for several things:
Removed the Google search bar by request.
Added more than one screen for scrolling.
Updated the dock icons to things more useful.
Apps installed with Google Play will automatically be added to the home screen.
I think you will like this launcher better

6) Calendar and Contacts sync is now fixed by Oman so I did not have to fix it this time. THANKS!

7) Build.prop edit to open up the Google Play store to APPs that normally say "not compatible".
I am spoofing a Samsung device (Nexus 10) that will show almost any APP as compatible.
This should also allow Netflix HD but I have not tested it.
Your device will show up in google play as Nexus 10 device not a S82/S89! Understand this please.
I also left the original build.prop in the ROM called build.orig.
If you want to go back, just use ES FIle Explorer or a root file explorer and rename build.prop to build.old
Then rename build.orig to build.prop.
Go into settings, apps, all and go into the Google Play app. Clear the cache and data.
Reboot! You should be back to showing up as a S82/S89.

8) I added a reboot APP that will allow optional reboot options like reboot to recovery for easier updates.

9) Adjusted some permissions so stock XBMC works (but not 4K and I didn't test all audio output capability).
I did install Kodi and it works for me and I did not see any sync issues. But again I did not test everything.

10) Added bonus! CPU fixer patches!
In this ZIP is a CPU_fixer folder. These zips can be used to adjust your minimum CPU frequency and Governor. See the README.txt in that folder for an explanation and how to install them.

11) Sorry folks. 720P patcher will not be provided this time!
Why? Because the code has now drastically changed and I have not been able to make it work this time.
I will continue to try and get the 720P patch working again.

12) Carrier spoofs for better APP compatibility.

13) The usual tweaks I do for better performance e.g. TCP buffers sizes, etc etc.

14) Did a little "themeing" to the AOSP Launcher stock wallpaper.

________________________________________________


DO NOT just copy this download ZIP to SDcard and expect it to work!
UNZIP it and read the README for instructions!

________________________________________________



OK so here is the download!

READ the README.TXT in the zip for instructions!


ROM -> Tronsmart S89/S89H & Beelink S82/S82H/M8 - Finless ROM 2.0 (419 megs)


Bob

HELP my Vega s89 is stuck at the "a bob finless ROM" screen and wont move.anyway to save it?

[Fleyd]

Thanks for the suggestion, I installed the app soundabout and now it works fine. Thanks.

Also, can you make video calls with Skype? I can make audio and chat, but no video. I know certain cameras doesn't work, mine is a Microsoft hd3000.

[no_spam_for_me]

Hello, i have just installed this rom in my mx3 and all works good, although with me mele f10 connected I only have sound coming out from it! I can't have sound from the TV, I have tried a lot of things...

Anyone knows if I can use mele f10 pro and have the sound coming out from tv?

Thanks

http://www.freaktab.com/showthread.php?15503-S89-H-and-melee-F10-Pro-and-Soundabout

[eM82]

Anyone knows if I can use mele f10 pro and have the sound coming out from tv?

Hi,
I don't know what FW do you using at the moment, but as far as I know Finless already fixed this problem (in 2.0 or 2.1 ROMs). If not, well, you can still use this method.
Happy New Year!
greetings,
eM

[Fleyd]

Hello, i have just installed this rom in my mx3 and all works good, although with me mele f10 connected I only have sound coming out from it! I can't have sound from the TV, I have tried a lot of things...

Anyone knows if I can use mele f10 pro and have the sound coming out from tv?

Thanks

[serunting]

Is the finless rom installed your device? Did you install any app to make it work?

Thanks

yes finless 2.0, i have to used sixaxis app.
then choose detect as native gamepad in sixaxis option so the device detect it as a native gamepad (default is as a keyboard)

i dont know if you can directly connect withous sixaxis app, bluetooth mode is different if you want to connect the DS3 to the device. and pairing stuff too need sixaxis.

[blinkone]

So If I understand correctly it means after pairing with the sixaxis app I can use the controller directly and do not need to do mapping or whatever?

Thanks

some will still need mapping & some won't its about 50/50