New: Tronsmart Ara BJ19 NUC-like Mini PC Intel Celeron J1900 Processor

[babis666]

I have the exact same issue as you.
Don't know is there are any BIOS setting that could fix this

Same here

[LycanWrath]

Does anyone have experience in configuring a remote controller for kodi or plex on windows with this box (ARA BJ19) ?

[LycanWrath]

Hi!
8Gb/500Gb/W8.1pro64. All drivers installed.
i have big problem with Realtek PCIe GBE Family Controller.
This device not working normal in windows 8.1 and other OS.
If unplugged 220V cable and run W8.1 - all ok. Speed - 1Gb\s, pumps over 100 MByte in sec. If Win restart - ok. After sleep - ok.
But if shutdown from Win - after up Win problem: "identification", "unknown network" "without access to the Internet". And after the "button on" - LAN not working. Boot from "live usb (WinPE)" - LAN not working...
Off/on cable 220V - LAN ok...
Drivers latest from Realtek. All "green" and all power management in drivers - "off".
(In bios I did not find the settings that affect this problem. Only the choice of OS - "Windows 7" - lan work with such problems. If choice "Windows 8.x" or "Android" - "cable not connected").
Help!
It may be in the BIOS settings? (BIOS latest from Tronsmart site). May be after shutdown from OS BIOS not initialized lan-chip...?

I have the exact same issue as you.
Don't know is there are any BIOS setting that could fix this

[deathwalker9]

Hi!
8Gb/500Gb/W8.1pro64. All drivers installed.
i have big problem with Realtek PCIe GBE Family Controller.
This device not working normal in windows 8.1 and other OS.
If unplugged 220V cable and run W8.1 - all ok. Speed - 1Gb\s, pumps over 100 MByte in sec. If Win restart - ok. After sleep - ok.
But if shutdown from Win - after up Win problem: "identification", "unknown network" "without access to the Internet". And after the "button on" - LAN not working. Boot from "live usb (WinPE)" - LAN not working...
Off/on cable 220V - LAN ok...
Drivers latest from Realtek. All "green" and all power management in drivers - "off".
(In bios I did not find the settings that affect this problem. Only the choice of OS - "Windows 7" - lan work with such problems. If choice "Windows 8.x" or "Android" - "cable not connected").
Help!
It may be in the BIOS settings? (BIOS latest from Tronsmart site). May be after shutdown from OS BIOS not initialized lan-chip...?

[yhaddad]

Thanks,

Someone else have the same problem in Linux?

[trebor]

If Problem In both then maybe ethernet port.
There is a lot of new Drivers about for Windows original post 2 months old.

Unbutu someone else maybe able to assist
Cheers

[yhaddad]

I tried to install Ubuntu 14.04 and I still have the ethernet issue!
The LEDs doesn't turn on.... Maybe sometimes for 1 Sec and again turn off..

The Ubuntu shows the ethernet disconnected... Blinking connected, disconnected.

Please help... [

QUOTE=trebor;n522386]Tronsmart BJ19

Some Setting for ethernet that may or may not help

Auto disable Gigabit (disabled),
Flow control (Rx and Tx Enabled)
Energy efficient ethernet or green ethernet (disabled),
Interupt Moderation (Enabled)
IPv4 Checksum Offload (Rx and Tx enabled),
Jumbo Frame (Disabled)
Large Send Offload v2 (IPv4) (Disabled)
Large Send Offload v2 (IPv6) (Disabled)
network Address (Not present)
Priority and VLAN (Both Enabled)
receive buffers (512),
recieve side scaling (Enabled)
Shutdown Wake on LAN (enabled),
Speed and duplex (100MBPS full DUPLEX) (This setting allows collition free environment thus enable stable data transfers,i always recomend full duplex)
TCP Checksum offload(IPv4) (Disabled),
TCP Checksum offload(IPv6) (disabled),
Transmit buffers (128),
UDP Checksum offload(IPv4) (disabled),
UDP Checksum offload(IPv6) (disabled),
Wake on Magic Packet (enabled),
Wake on Pattern Match (enabled),
WOL & Shutdown Link Speed (100 Mbps first)

More searching found a newer/latest driver set and all option are to be seen and utilised

http://www.realtek.com.tw/downloads/...&GetDown=false

Also grab the Windows Diagnostic Program same page bit of indepth view of the Network card.


Go for the Win8.1

Cheers[/QUOTE]

[tmc8080]

I am having issues with finding a working memory for the box

These two 4Gb sticks do not get me to POST screen:-


This 8Gb stick from my laptop gets me to POST screen:-


Based on these pics do you guys know why the two 4Gb sticks do not work with this box and what memory I should specifically buy?

Hey, did you try each module individually to see if either worked separately?
I suspect this box won't work well with mixed speed ratings, and minimally NEEDS PC1333+ memory modules.
Also, voltage specs are critical. these boxes primarily ONLY work on the lower voltage types (or whatever is specified). This is usually a mobo chipset requirement tied to the itx mobo's chipset.
Couldn't hurt to pop a module in a regular laptop & see if they still work.

[LycanWrath]

The Samsung M471B5273DH0-YK0 memory stick I have is 1.35v works without issue on my laptop, yet it does not work with the Tronsmart box.

The things that differentiate this Samsung M471B5273DH0-YK0 memory vs the the Kingston KVR16LS11/4 stick are:-

Number of Ranks2 | Number of Ranks1
DRAM Organization256Mx8 | DRAM Organization512Mx8
Number of DRAM 16 | Number of DRAM 8

This might be the issue, the box does not just take any 1.35v memory stick, hope others don't make the same mistake on this..

Memory details:-
www.compuram.de/en/memory_module,m471b5273dh0-yk0,samsung.htm
www.compuram.de/en/memory_module,kvr16ls...ingston+valueram.htm

[trebor]

Yep same number as written on my stick so yes.

[LycanWrath]

Thanks,

This model seems to be close to yours right? (4GB 1600MHZ for low) KVR16LS11/4

http://www.aliexpress.com/item/original-DDR3L-8GB-1600MHz-PC3-12800-1-35V-KVR16LS11-4-KVR16LS11-8-Non-ECC-CL11-SODIMM/32509302324.html?ws_ab_test=searchweb201556_3_71_72_73_74_75,searchweb0_0,searchweb201560_9

[trebor]

See if you can some numbers of this, its what I used and does works
Minimum 1300 I recall 1600 is ok must be L low voltage
One of your Pictures is 8 GB

[LycanWrath]

I am having issues with finding a working memory for the box

These two 4Gb sticks do not get me to POST screen:-


This 8Gb stick from my laptop gets me to POST screen:-


Based on these pics do you guys know why the two 4Gb sticks do not work with this box and what memory I should specifically buy?

[babis666]

In the Interest of something cheaper
Looking around I see the BJ19 is on special
Coupon: XBMCBOX
$25.00 off Coupon

Thank you trebor just got one for $104.99

[ravideep]

Hello all,

Does anyone know what will be the best android ios image will work on BJ19 along with windows.