Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
Beelink i68 firmware WiFi and Bluetooth fix for AP6330 chipset
Collapse
X
-
I have ssay v7 but when I start something I feel in 100Hz as if there was too much image as the frame rate is between 11 and 60 fps which is strange.
and custom kodi 15.2 is not working properly .
Leave a comment:
-
Originally posted by tsukaza View PostAdditional details added to make bluetooth fix easier.
tsukaza where can I find this Zidoo custom v7? I was able to install and play with Ugoos UT4 0.0.03b but official Kodi (I have to use the official version because I depend on PVR Addons) is still not ok...
Sorry, no need to answer, I should have done a better search before asking...
Leave a comment:
-
Originally posted by johnjewitt2004 View Postsorry i have followed and fixed wifi but i dont understand these steps
c. On tv box backup /etc/system/vendor/firmware/bom43438a0.hcd
d. On tv box backup /etc/system/vendor/lib/libbt-vendor.so
e. On tv box copy bom43438a0.hcd from sdcard to /etc/system/vendor/firmware
f. Change permission to 644
g. On tv box copy libbt-vendor.so from sdcard to /etc/system/vendor/lib
h. Change permission to 644
could you please explain in a bit more detail if you could please what you have to do thanks
These are the manual step to extract the 2 files from the zip file which is developed by the dev to allow a TWRP upgrade to replace the factory bluetooth files.
My steps allows people without TWRP installed to achieve the same results.
Let me change the steps to make it easier.
Last edited by tsukaza; 02-12-2016, 18:53.
Leave a comment:
-
for my i68 with the v0.3 UT4 FW, I followed the original instructions and the BT was working. What do the additional new steps do?
With the v0.3 UT4 FW my location services did not work. Has anyone else seen this issue.?
I also noticed that with any FW with a single SD partition, you cannot have a USB stick and an external hard disk connected at the same time. One at a time and there is no issue but it you connect both you cannot detect the external harddisk.
Leave a comment:
-
Originally posted by johnjewitt2004 View Postsorry i have followed and fixed wifi but i dont understand these steps
c. On tv box backup /etc/system/vendor/firmware/bom43438a0.hcd
d. On tv box backup /etc/system/vendor/lib/libbt-vendor.so
e. On tv box copy bom43438a0.hcd from sdcard to /etc/system/vendor/firmware
f. Change permission to 644
g. On tv box copy libbt-vendor.so from sdcard to /etc/system/vendor/lib
h. Change permission to 644
could you please explain in a bit more detail if you could please what you have to do thanks
anyone else able to help, thanks
Leave a comment:
-
sorry i have followed and fixed wifi but i dont understand these steps
c. On tv box backup /etc/system/vendor/firmware/bom43438a0.hcd
d. On tv box backup /etc/system/vendor/lib/libbt-vendor.so
e. On tv box copy bom43438a0.hcd from sdcard to /etc/system/vendor/firmware
f. Change permission to 644
g. On tv box copy libbt-vendor.so from sdcard to /etc/system/vendor/lib
h. Change permission to 644
could you please explain in a bit more detail if you could please what you have to do thanks
Leave a comment:
-
could someone create external fix to change AP6335 to AP6330 and BT on any firmware ? I use beelink i68 100Mbit and it seems to be abandoned by beeling / http://www.azw-online.com
I want to flash with any new firmware from Tronsmart R68 and fix wifi / BT. Is it possible ?
Leave a comment:
-
Beelink i68 firmware WiFi and Bluetooth fix for AP6330 chipset
Beelink i68 firmware WiFi and Bluetooth fix for AP6330 chipset, BTW Zidoo v7 eliminated all of the stuttering as far as I can tell.
Hardware : Beelink i68
Firmware :
Zidoo custom v8 ( No stuttering )
http://freaktab.com/forum/tv-player-...plant-your-rom
https://mega.nz/#!TMYW1Jzb!ByH1Jhqvh...Nk4AlGPrZIhbt8
Ugoos UT4 0.0.3b ( Still have stuttering )
Tool :
Android factory tool to flash .img file.
Special install
================================================== ==========
A. WiFi fix using xplorer as root
TV BOX
1. Using xplorer (root) open root
2. Go to /etc/firmware and locate nvram_AP6335.txt
3. Copy nvram_AP6335.txt to SD card (optional)
5. Rename nvram_AP6335.txt to nvram_AP6335.txt.orig
6. Rename nvram_AP6330.txt to nvram_AP6335.txt
7. Reboot
================================================== ==========
B. Bluetooth fix using xplorer as root
On PC/Laptop
1. Download https://mega.nz/#!XUQQjRbC!TqKcyizBx...zO1pFDWkGj_pTo
2. Unzip and extract the zip file
3. From the extracted directory copy 2 files ( bom43438a0.hcd and libbt-vendor.so ) under /system/vendor and copy to SD card
TV Box
1. Insert SD card into TV box then use xplorer (root) and open root
2. Locate /system/vendor/firmware/bom43438a0.hcd rename to bom43438a0.hcd.orig
3. Locate /system/vendor/lib/libbt-vendor.so rename to libbt-vendor.so.orig
4. Copy bom43438a0.hcd from sdcard to /system/vendor/firmware/bom43438a0.hcd
5. Change permission of bom43438a0.hcd to 644 ( using xplorer permission option )
6. Copy libbt-vendor.so from sdcard to /system/vendor/lib/libbt-vendor.so
7. Change of permission of libbt-vendor.so to 644 ( using xplorer permission option )
8. Reboot
================================================== ==========
*** If you are using TWRP then just flash the zip file downloaded from below ***
https://mega.nz/#!XUQQjRbC!TqKcyizBx...zO1pFDWkGj_pToLast edited by tsukaza; 03-16-2016, 01:57.Tags: None
What's Going On
Collapse
There are currently 4272 users online. 7 members and 4265 guests.
Most users ever online was 16,134 at 08:28 on 08-11-2023.
Leave a comment: