Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
Looking for firmware for M8S+ (M8+20160126-V13) *Pics inside*
Collapse
X
-
So I went into recovery console again, cleared cache, and used factory restore option. Box booted back up just like from factory. But STILL Ethernet not connected
I do see the MAC address. I have not tested STATIC IPs because I know my DHCP is working properly (I tested this same network cable on other M8S+ boxes which connect fine). I am going to check my router logs to see if I can see any indication of network activity from this box. I will continuely update this until I solve or give up
-
Originally posted by morty421 View PostI have other properly working M8S+ units. Today I used TWRP to create a backup of a working M8S+ and I successfully applied it to my broken M8S+. I really thought I fixed it.
Is it 4.4 or 5.1?
Cheers.
Leave a comment:
-
I have other properly working M8S+ units. Today I used TWRP to create a backup of a working M8S+ and I successfully applied it to my broken M8S+. I really thought I fixed it.
BUT... ETHERNET still not working (but the remote is finally working properly again). Ethernet ALWAYS shows "Not Connected". When I plug the ethernet cable into the box, I do see the led light from inside the RJ45 port on the tvbox. I have verified the ethernet cable is working (it works fine on my other M8S+ boxes).
So now the question....
How in the hell does ethernet just stop working on a box like this? Is this likely a hardware issue now? Seems very strange since this all happened from a bad firmware flash.
I like to understand all the steps I do on these boxes, and not just follow instructions blindly. Can someone tell me if deleting cache partitions at this point is useful to try? Or are there other things I might want to try to get ethernet working again?
Leave a comment:
-
OP - I have the exact same box as you, i'm very stuck also.... I bricked mine but managed to get a firmware reinstalled but the new firmware is an older one and wifi and ethernet doesn't work and i can't get into recovery now anymore either, this has been wrecking my head for days! i've tried many img files through the usb tool and none of them get past 2% (apart from the one i have installed)
I asked the suppliers for a stock firmware for the box but it's in the SD format so is pretty useless to me (no recovery as i said)
Is there a way of converting firmware for the SD card method into an IMG file for the USB flashing method? that could work maybe? dunno though, i'm no expert.
Leave a comment:
-
Originally posted by morty421 View Post[...] I have not. Which cache do you refer to... and where is it located? In the recovery console I see an option to delete my cache partition but I did not do that (nor do I think I should).
2. How USB Burning Tool behaves with aml_upgrade_package.img file from https://mega.nz/#F!y4ZmQZaI!0G8hPIwHmyul4DvCWdkIrA ?
Leave a comment:
-
REDLIQUID, thank you so much for taking time to reply to my messags. I really do appreciate the kind work(support) done by people like you on this forum. THanks!!
Originally posted by redliquid View Post1. With this firmware: https://mega.nz/#F!y4ZmQZaI!0G8hPIwHmyul4DvCWdkIrA ethernet doesn't work?
I am using a 1GB Kingston SDCard.
I used Bootcard Maker to format the drive, and selected the u-boot.bin file from the above zip archive.
First attempt I only copied the 3 files from the above zip (amlogic_sdc_burn.ini, aml_upgrade_package.img, and u-boot.bin). However the m8s+ will not boot from the SDCard (I get message Cannot load volume /misc!)
Second attempt I copied a recovery.img file (this recovery.img is found in many firmware zip archives for m8s+... I used md5 checker to verify its the same file in multiple firmwares). Even with this recovery.img file, I still cannot get it to boot from the SDCard recovery method. Same error: Cannot load volume /misc!
Originally posted by redliquid View Post2. Have You tried to clear the cache after flashing process?
Leave a comment:
-
Originally posted by morty421 View Post
Hi redliquid,
It seems ethernet is not working on the firmware from that thread. But I am still going to test with it.
I already recovered my bricked m8s+. But now I am trying to find a firmware that makes ethernet work! I would also like to get the remote to work but that is less important since it can be worked-around by using any RF remote with a dongle.
So I guess I should be more specific... Anyone have a firmware for my m8s+ with working ethernet?
1. With this firmware: https://mega.nz/#F!y4ZmQZaI!0G8hPIwHmyul4DvCWdkIrA ethernet doesn't work?
2. Have You tried to clear the cache after flashing process?
Leave a comment:
-
Originally posted by redliquid View Post
How to unbrick this device (and firmware also) (Dia's method):
1. Download this u-boot https://mega.nz/#!nkYEyawZ!D8vrZgrFf...Rj9y9IqCU7qUbw
2. Download this firmware https://mega.nz/#!NcxQzAxZ!eiWD0Ic2H...NkZ_KG944k_ipc
3. Extract zip file and replace the u-boot.bin with the one from mega.nz
4. Format sd card with the u-boot.bin
5. Copy all files (factory_update_param.aml , M8S+-ota-20151216.zip, recovery.img and u-boot.bin) onto the sd card
6. Use the toothpick method
Greetings from Poland.
The m8s+ will start the upgrade process, but when its finished it does not reboot and the tv screen goes black (no signal). The blue light stays on. Then, if I unplug the power, and plug it back on, the box does not turn on and no light. Bricked.
Leave a comment:
-
Originally posted by redliquid View Post
I think, that You should read this topic:
http://freaktab.com/forum/tv-player-...81-bricked-m8s
There are a lot useful informations about Your hardware.
It seems ethernet is not working on the firmware from that thread. But I am still going to test with it.
I already recovered my bricked m8s+. But now I am trying to find a firmware that makes ethernet work! I would also like to get the remote to work but that is less important since it can be worked-around by using any RF remote with a dongle.
So I guess I should be more specific... Anyone have a firmware for my m8s+ with working ethernet?
Leave a comment:
-
Originally posted by morty421 View PostCan someone help me find firmware for this m8s+?
EDIT: If the images appear too small, please view the images from my shared Google Drive folder: https://drive.google.com/folderview?...XYtdVdfWHB5Qms
I think, that You should read this topic:
http://freaktab.com/forum/tv-player-...81-bricked-m8s
There are a lot useful informations about Your hardware.
Leave a comment:
-
Originally posted by morty421 View PostCan someone help me find firmware for this m8s+?
EDIT: If the images appear too small, please view the images from my shared Google Drive folder: https://drive.google.com/folderview?...XYtdVdfWHB5Qms
1. Download this u-boot https://mega.nz/#!nkYEyawZ!D8vrZgrFf...Rj9y9IqCU7qUbw
2. Download this firmware https://mega.nz/#!NcxQzAxZ!eiWD0Ic2H...NkZ_KG944k_ipc
3. Extract zip file and replace the u-boot.bin with the one from mega.nz
4. Format sd card with the u-boot.bin
5. Copy all files (factory_update_param.aml , M8S+-ota-20151216.zip, recovery.img and u-boot.bin) onto the sd card
6. Use the toothpick method
Greetings from Poland.
Leave a comment:
-
Looking for firmware for M8S+ (M8+20160126-V13) *Pics inside*
Can someone help me find firmware for this m8s+?
EDIT: If the images appear too small, please view the images from my shared Google Drive folder: https://drive.google.com/folderview?...XYtdVdfWHB5QmsYou may only view thumbnails in this gallery. This gallery has 4 photos.4 PhotosTags: None
What's Going On
Collapse
There are currently 1815 users online. 10 members and 1805 guests.
Most users ever online was 16,134 at 08:28 on 08-11-2023.
Leave a comment: