Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

X92 TV Box S912, Android 6, 3/16GB, Dual WiFi, Gig Lan

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by gabb View Post
    Hey guys.
    I'm trying to get audio out of this Android TV box by hooking up some headphones to it.

    I tried plugging in headphones in the AV port but nothing happens.
    I've set the "digital audio" selection to PCM (other options are HDMI and SPDIF, neither of these work either from the AV port.)

    Audio over HDMI and optical audio work perfectly.

    The only thing I can think of is that the AV port has some strange pin out that doesn't pass audio over the headphone jack. But then again, I don't get audio on the right side nor left side.
    Perhaps it's the other 2 parts of the minijack?

    If someone can test this for please, I would be grateful.

    I did flash my unit with the Ugoos firmware for the same device. But I really doubt that that is the issue.
    You need to use 4pin av jack. Standard headphones jack pinout is defferent.


    Click image for larger version

Name:	raspberry_pi_277-00.jpg?1405319661.jpg
Views:	305
Size:	51.2 KB
ID:	665808

    Click image for larger version  Name:	be3c9d42b574d45d.png Views:	1 Size:	16.0 KB ID:	665807
    X92 3/32 Android TV Box with Ugoos AM3 Firmware

    Comment


      Originally posted by pavlik View Post

      You need to use 4pin av jack. Standard headphones jack pinout is defferent.
      Not my experience at all. I've used at least 3 different TV boxes that I connected to an analog TV via a 3xRCA cable you'd depicted and the same A/V port worked fine for 3.5mm audio.

      The only problem I've encountered was poor contact so I had to experiment with insertion depth, believe it or not

      Comment


        SAMDE

        ​​​​​​​Hi everyone
        Please tell me where can I get the file OTA_2GB.APK?

        AND

        I have downloaded the SAMDE's firmware v19, how to update my box? Will my data get lost?
        Last edited by Zeex92; 31 August 2017, 16:21.
        Ugoos AM6B PLUS Android 9 TV box | CoreELEC 19.2

        Comment


          Originally posted by Zeex92 View Post
          SAMDE

          ​​​​​​​Hi everyone
          Please tell me where can I get the file OTA_2GB.APK?

          AND

          I have downloaded the SAMDE's firmware v19, how to update my box? Will my data get lost?
          here http://4pda.ru/forum/index.php?showt...ost&p=64543795

          Comment


            Thanks, I will check
            Ugoos AM6B PLUS Android 9 TV box | CoreELEC 19.2

            Comment


              Hi, everyone. I'm planning to get my 1st android box and after doing some research over the forums and youtube reviews (eg Chigz Tech Reviews).. I've decided to get this X92. But before that, I would like to ask.. is there any significant difference between the 3gb 16gb model and the 3gb 32gb model.. apart from the extra 16gb space?

              Main usage is for online streaming (k-drama for the wife) and occasional gaming with my son.

              Thanks in advance!

              Comment


                Saves you buying an extra 16gb card for storage is about all I think you will find.
                treboR
                Please consider
                Donating to Freaktab

                Comment


                  Originally posted by trebor View Post
                  Saves you buying an extra 16gb card for storage is about all I think you will find.
                  Thanks. I've finally decided to just go for the 3gb+16gb. Bought it online for ±$56 plus shipping, arriving at least a week.. can't wait.

                  Comment


                    Hallo ist diese Software für X92 3/32GB möglich. Z69 Max TV Box Amlogic S912 CPU 3/32GB Android 7.1 Dual WiFi BT 4.1

                    Comment


                      Hi everyone,

                      I bough a x92 3g/16g a year ago,
                      it's all good at the first month,

                      then it started with an issue, that The wifi will be in OFF status when you turn on the x92, and the wifi could never be switch on anyhow.

                      Without any solution, i rest it for few weeks, and turn it on, the wifi will work for a while like one or two hours, which is the period I was using it.

                      however, once i turned the x92 off, the wifi would have the same problem again.

                      I guess it is mostly because of the hardware issue?.. or would it be an firmware issue? But i actually have tried to install a few different versions of firmware, and the problem still exists..

                      Please help me out guys..

                      Regards,
                      William

                      Comment


                        Hi. Strange question. I am on vacation and I took my X92 box with me, but I left the remote control unit at home. Could someone give me any advice, is it available to download a remote app to my android phone to control my box.
                        g947

                        Hi. I am home again, the problem solved.
                        g947
                        Last edited by g947; 24 October 2017, 15:43.

                        Comment


                          Hello guys, get so much information from this forum. I just bought X92 2GB version. Is there anyone here succesfully modify the kernel to make the touch screen works?

                          Comment


                            Hello everyone, sorry for my English. I have found the android software 7.1.2 for the 3g/16gb or 3g/32 tv box. There are three versions.
                            All information was obtanied from the following url:
                            https://4pda.ru/forum/index.php?showtopic=773971&st=10760#entry65967731

                            1) Official rom 7.1.2:


                            2) Rikomagic MK22 Plus Android 7.1.2 (it includes twrp recovery):
                            https://4pda.ru/pages/go/?u=https%3A...597&e=66777806

                            3) Vasily-vorke version 7.1.2(Observation: front panel lights do not work):


                            Steps of the installation:



                            a) first download Usb burning tool version v2.0.5.15 and you must have usb-usb cable (burning tool is in zip mediafire)

                            - unzip zip and get the img (Android_7.1.2_PC-rooted_Vasily.img.zip)
                            - Load the firmware, but do not connect to the TV box yet.
                            - After loading the firmware click on start (normal erase).
                            - connect the tv box to the pc through the usb-usb cable, do not connect tv box power source.
                            - Wait until the firmware is installed.

                            b) additional software.

                            - install recovery.img by means of rashr or zip update
                            - install xposed framework using twrp.
                            - viper4fx using apk.
                            - cpu monitor, temp apk

                            http://www.mediafire.com/file/w5x6i2...covery_apk.rar

                            Any question that you ask I will not be able to answer, I am not an expert. I have tested the software for the X92 3G/16G TV box.

                            If you do not like the software, you may go back to android 6. you follow the same steps described in a). Its firmware https://yadi.sk/d/plEevM78zKHMs

                            For the 2g/16 version, here is the link : https://4pda.ru/forum/index.php?show...#entry65967731

                            the steps that you take is under your responsibility.
                            Attached Files
                            Last edited by satacada; 21 November 2017, 16:44.

                            Comment


                              Originally posted by satacada View Post
                              Hello everyone, sorry for my English. I have found the android software 7.1.2 for the 3g/16gb or 3g/32 tv box...
                              Hi Satacada,

                              Thanks for your updates,

                              could you please confirm that if all these three versions got english or even chinese language?

                              Since you have got a 3g version s912.. and i heard that, quick a few of 3g version got wifi issue... like I posted at #320 as below:

                              ------------------------
                              Hi everyone,

                              I bough a x92 3g/16g a year ago,
                              it's all good at the first month,

                              then it started with an issue, that The wifi will be in OFF status when you turn on the x92, and the wifi could never be switch on anyhow.

                              Without any solution, i rest it for few weeks, and turn it on, the wifi will work for a while like one or two hours, which is the period I was using it.

                              however, once i turned the x92 off, the wifi would have the same problem again.

                              I guess it is mostly because of the hardware issue?.. or would it be an firmware issue? But i actually have tried to install a few different versions of firmware, and the problem still exists..

                              -----------------

                              The warranty of the box has already expired..
                              Do you have any idea how can i fix it? or if there is anyone mentioned this on 4PDA ?.. i can't read Russia..

                              Kind regards,
                              William

                              Comment


                                HAOOFE

                                Hi. All the firmwares belong to https://4pda.ru. I have tried them and they can change to English language (I am not sure about Chinese language).
                                About the wifi, I think you have hardware problems. I recommend you try the wifi operation near the router, if you continue to have problems, your hardware is the problem. The only thing you can do is connect via network cable or :

                                https://www.aliexpress.com/wholesale...antenna+RT5370

                                I have tried the software in the tv box and I have no problems with the wifi, this can be on all day and there are no problems.

                                Maybe you can find an alternative solution in the forums 4pda.ru use the google browser and translate the page

                                Regards,

                                Satacada
                                Last edited by satacada; 13 November 2017, 20:44.

                                Comment

                                Working...
                                X