[ROM] Sunvell T95Z PLUS / T95K PRO / T95U PRO - 2Gb/16Gb - SCV1 Final ROM

[tommymsw]

Any idea if this will give my box USB Hard drive support? I have two android boxes... One will recognize the the external HD, but has no bluetooth, and the other (this one), has bluetooth but will not recognize an external HD. It WILL notice a UBB drive stick... Just not an external "big" HD. Not sure if that is a software thing, or a hardware thing.

[mitchschaft]

The latest usb burning tool is 2.1.2

https://mega.nz/#!i8pxACKC!EIP9DucLYVABx99A-VihIn04Pt7t37-j3r-NKDBEjFs

[eddieaok]

Hi I went for a fresh reinstall of this rom recently and have a couple of questions regarding wireless settings.

1/ I use Ethernet but every time I switch on my T95z in settings network the wifi device switch is enabled, this reoccurs after turning this off "is there a permanent fix for this"!

2/ In device network Ethernet connected, Advanced options, IP setting static DCHP is highlighted not static? Is this normal?
Note this is after successfully saving my static IP settings.

Ed.

[tvmick]

Hello guys, i need some dire help.

i have a 3G 32GB variant with AP6255.

my wifi was broken hence i browsed thru and was flashing the firmwares using tooth pick method.

1st attempt. - my recovery didnt boot at all. no HDMI signal was going to the TV

2nd attempt - managed to boot to recovery and flashed the firmware. wifi was not fixed.

3rd attempt onwards i could never get into recovery.

looks like my sd card marker is missing some boot files.

appreciate someone could guide me the extact steps and files i need for recovery to work.

I'm not sure what box you have but I use the USB update method using usb burning tool v2.08
Dont have anything connected to your box

1. Open usb burning tool
2. From 2nd dropdown menu select english
3. Load your .img file and wait until it loads
4. Have Usb A to Usb A lead ready connected to pc
5. Press hidden reset button an hold it
6. Connect usb cable to rear usb port on box
7. Wait for connected message (still hold reset)
8. Apply power to box and release the reset button
9. Press start in the tool and wait until 'success' appears in green
10. Unplug box and close tool

IMPORTANT: Make sure that you have the correct file for your box

[archrival9]

Hello guys, i need some dire help.

i have a 3G 32GB variant with AP6255.

my wifi was broken hence i browsed thru and was flashing the firmwares using tooth pick method.

1st attempt. - my recovery didnt boot at all. no HDMI signal was going to the TV

2nd attempt - managed to boot to recovery and flashed the firmware. wifi was not fixed.

3rd attempt onwards i could never get into recovery.

looks like my sd card marker is missing some boot files.

appreciate someone could guide me the extact steps and files i need for recovery to work.

[tvmick]

I didn't Factory reset.
My fault, I forgot about the hidden reset button. However after the upgrade I've lost all Wifi and Bluetooth connectivity.
Maybe I'll try refashing again to see if it gets them back

Problem cured... I reflashed the original firmware. Wifi / Bluetooth worked. reflashed v1015, NO Wifi / Bluetooth Flashed with v1013 and the Wifi / Bluetooth worked so maybe the v1015 Firmware has an issue with it.

[tvmick]

That is strange. I updated both of my T95k boxes using both methods. Have you tried doing a factory reset first?

I didn't Factory reset.
My fault, I forgot about the hidden reset button. However after the upgrade I've lost all Wifi and Bluetooth connectivity.
Maybe I'll try refashing again to see if it gets them back

[mitchschaft]

That is strange. I updated both of my T95k boxes using both methods. Have you tried doing a factory reset first?

[tvmick]

I put the Superceleron firmware on my T95K Pro box ages ago and now want to put the latest 1015 firmware on BUT both the usb tool and sdcard methods will not work, the box boots as normal and won't detect the upgrade file. Its like theres no por/atr . Can anybody shed any light as to whats wrong here?

My fault, I forgot about the hidden reset button. However after the upgrade I've lost all Wifi and Bluetooth connectivity.

[mitchschaft]

Here's the latest rom for the T95K Pro. Eggyfresh got it from the developer:

T95KPRO-2GB-v1015: https://mega.nz/#F!5lZSHbYB!gkWtSxJZTsiN0g24tRIyoQ

[minoltista]

Hi all', Sorry for the question: does anyone share me a link how to download this firmware? I have stock version.
Thank you.
M

Inviato dal mio Redmi Note 3 utilizzando Tapatalk

Answer myself: Just download USB burning tool and flash.


Inviato dal mio Redmi Note 3 utilizzando Tapatalk

[minoltista]

Hi all', Sorry for the question: does anyone share me a link how to download this firmware? I have stock version.
Thank you.
M

Inviato dal mio Redmi Note 3 utilizzando Tapatalk

[rumunn95]

It's any chance to work witch LTM 8830 chip ? How implement drivers to kernel to work with? Or external usb bluetooth work. I use sixaxis pad and i want to use with this rom.
Sory, my english is poor.

Wysłane z mojego LG-D802 przy użyciu Tapatalka

[Bekko]

Hello,

I have the sunvell T95z plus 3gb/32gb.
Does this Rom work on it or where can I find a custom rom for it?

[cdzo72]

I just installed this ROM on my T95Z that came with Android 7.1 from the factory. Everything but the ethernet seems to be working fine but I did notice something no one has mentioned... the ethernet icon IS visible in the LED front screen but as others have observed I don't have any connection using ethernet even trying to punch in static IP settings.