Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
Arnova 10 G2 Custom ROM by Finless Version 1.5
Collapse
X
-
Originally posted by sadsack View Post
-
Originally posted by sadsack View PostSlightly off topic but whilst flicking through appslib, I noticed that arctools had an updated firmware available for the 10g2, I think it was the EZ Custom.
Does any one know who updates this firmware, is it some of Bobs work?
Thanks for any replies chaps...
sadsack
Leave a comment:
-
Originally posted by trevorbright View PostI went with 2.2 pro and eventually got it to boot OK after about 5 go's. Run supercharger all fine. Agreed it does seem smoother I have 2 of these and both now have 2.2pro, one with supercharger 6 activated and the other has not and both seem pretty good to be honest, pain that Iplayer doesnot work propery... so I have a bookmark to the website so that is that sorted.
I know every one would like ICS but so long as it works.... Still thinking was there another format better suited to the ram chips were are using after Ext4? This would be good and is there any milage in using the now available kernals with a fresh honeycomb build? I don't know just wondering.... Happy tabbing!
Iplayer is just cack, It locks up on my ps3 all the time even at 4 in the morning, you can't say there's 20 million people using it at that time of night, so there's no excuse really, apart from the beeb not doing there job properly.
I tried the website trick and the beeb site told my I needed to download there latest software, wtf.... No thanks beeb.
Those 5 times to boot trevorbight, were you just doing reset's, or just trying the power button, ??
cheers
sadsack.
Leave a comment:
-
Originally posted by sadsack View PostHi trevorbright,
Could you let us know what you decided to go with and what you think about it ?????
I'm looking at doing the same at my end,
all the best
sadsack
I know every one would like ICS but so long as it works.... Still thinking was there another format better suited to the ram chips were are using after Ext4? This would be good and is there any milage in using the now available kernals with a fresh honeycomb build? I don't know just wondering.... Happy tabbing!
Leave a comment:
-
Slightly off topic but whilst flicking through appslib, I noticed that arctools had an updated firmware available for the 10g2, I think it was the EZ Custom.
Does any one know who updates this firmware, is it some of Bobs work?
Thanks for any replies chaps...
sadsack
Leave a comment:
-
Originally posted by tattman65 View Postyes definatly the pro rom is for sure the best for the 10g2 by far it is very smooth a great rom
Leave a comment:
-
yes definatly the pro rom is for sure the best for the 10g2 by far it is very smooth a great rom
Leave a comment:
-
Hi trevorbright,
Could you let us know what you decided to go with and what you think about it ?????
I'm looking at doing the same at my end,
all the best
sadsack
Leave a comment:
-
Re: Arnova 10 G2 Custom ROM by Finless Version 1.5
2.2 pro with v6 installed is the absolute best there is with the G2. It is odd, because I never noticed a lag on 2.1.
Randy
Leave a comment:
-
10 G2 V1.5 vs V2.2
I am torn between 1.5 and 2.2 pro. what do you guys think? any chance of getting location based service working on the 1.5?
I currently have 2.1 and it seems a little laggy not too many apps installed, I can live with it. I have not put on 2.2 pro will this help you think by using supercharger v6.
I'm just after other opionions.
Not too worried about ICS now, just want a good fast functional freaktab!
Thanks!!!!
Leave a comment:
-
Camera Application Stops
Originally posted by tattman65 View Posthi, might i suggest you go ahead and flash Bob's 2.1 rom it will probably fix your camera issue and give you an upgraded rom, obviously if you have cleared your camera data and it is to no avail then you just may have some glitch that just happens from time to time ,what you have already done is usually the most common fix so try the 2.1 rom should set you straight.
Leave a comment:
-
hi, might i suggest you go ahead and flash Bob's 2.1 rom it will probably fix your camera issue and give you an upgraded rom, obviously if you have cleared your camera data and it is to no avail then you just may have some glitch that just happens from time to time ,what you have already done is usually the most common fix so try the 2.1 rom should set you straight.
Leave a comment:
-
Camera Application Stops
Hi, Guys. I have an Arnova 10g2 with the Finless 1.5 upgrade. It's worked fine for several months but lately when I tried the stock Camera application I got the message "The application Camera (process com.android.camera) has stopped unexpectedly. Please try again". I've tried manage apps/camera/clear data with no effect and a Google search has come up with nothing useful except a suggestion of a factory reset which obviously I wish to avoid. Has anyone got any ideas on this problem?
Thanks in anticipation.
Leave a comment:
-
PROBLEMA SUPERUSUARIO
BUENAS, INSTALADA LA1.5C Y VA PERFECTA, SE HA RALENTIZADO EL ARRANQUE PERO YA HE LEÍDO QUE SON POR LAS APLICACIONES, AHORA DESPUÉS DE 3 O 4 SEMANAS ME SALE EL ERROR DE DE SUPERUSUARIO Y SE APAGA LA APLICACIÓN Y YA NO PUEDO ACCEDER AL ROOT Y TAMBIEN ME DA ERROR GALERIA 3D PARA VER FOTOS
ES POR ALGUNA APLICACIÓN?
COMO PUEDO SUBSANARLO
SE PUEDE INSTALAR SUPERUSUARIO ELITE
TÍO SIGUE ASÍ Y PRONTO 1.6 CON DRIVERS BT
MUY MUY BUEN TRABAJO
SALUDOSLast edited by yojone; 01 October 2012, 17:05.
Leave a comment:
What's Going On
Collapse
There are currently 1629 users online. 0 members and 1629 guests.
Most users ever online was 63,956 at 18:56 on 20 March 2025.
Leave a comment: