1- Disconnect all the cable and usb and memory card from your box (to avoid power issues)
2- start usb buring tool from PC with image loaded (assuming your usb driver already installed properly)
3- Once iimage loaded successfully, tick on the option for force erase all and tick erase bootloader normally only needed when flashing different android version.
4- connect male2male usb cable to pc first
5. On your box, press and holding reset button then connect to male2male cable.
(to be safe dun let go your reset button yet until it goes beyond 2%, normally I wait until start to formatting)
6. On your pc when you see usb connected, then you press start.
Edited: In some unsual occasions you may needed to flashing 2-3x in order for it to reach 100%.
Leave a comment: