[ROM] Beelink GT-King ALVATECH Standard Android (9.0 Pie) S922X

[Detour]

I have also the B922 serie of the King and i flashed Alvatech?s rom which works great.

I use IPTV Smarters Pro and TiviMate without any problems. But also before i installed this custom rom and did not hace any problem with this two IPTV apps with my Beelink firmware. I worked with the firmware one version before this actual update some days ago.

Thank you for the information. I think updating the stock firmware was the issue. IPTV was working fine on the other version then I updated and boom issues started. Good to know the ROM works with it. I have been using IPTV Extreme app with Helix Hosting service. I will definitely have to give the ROM a try then.

Thanks again for the information.

[johnsemple123]

UM I'm guessing a red light on the box after flashing isn't good? (I had the B922 version as that what my SN said and now the box stuck on a red light..........................)

P.S. Scrap that. Just switched off and back on seems to be working PHEW!

[tombraga]

I have also the B922 serie of the King and i flashed Alvatech?s rom which works great.

I use IPTV Smarters Pro and TiviMate without any problems. But also before i installed this custom rom and did not hace any problem with this two IPTV apps with my Beelink firmware. I worked with the firmware one version before this actual update some days ago.

[Detour]

Hello all,

I'm interested in installing this ROM for my Beelink GT-KING (SN: B922) but I had a quick question to anyone that has already installed it and had it working properly. I recently purchased the Beelink GT-KING 4gb RAM - 64gb storage version and I did the update to most recent firmware and now every time I use my IPTV service the device just reboots when a channel is playing. Every other video service works fine, youtube, Netflix....etc. Doesn't matter what IPTV app I use, the device will reboot. So, apparently that is an issue on Beelink's side. See my link below for the forum post about it.

My question for this ROM is, has anyone tried to use any IPTV service/apps with this ROM and is it working and not rebooting? I don't want to wipe and go through the reinstall process just to find out the same thing happens.

http://www.bee-link.com/forum.php?mod=viewthread&tid=51872&extra=page%3D1&page=2

Any insight into this would be greatly appreciated so I can make a better decision to install or not to install.

Thank you in advance.

-
Mike

[ClarkKent]

XIAOMI and Beelink have a supply line relationship.
X is well dug into many Chinese IT production designs.

[matze54]

Just installed your rom on a brandnew GT King - works perfect and i could install it by the first try, thanks your perfect guide how to install. Thanks a lot for that perfect rom
What i was wondering it says in Cpu z manufacturer is xiaomi....is that so?

[ALVATECH]

Hi ALVATECH , Thanks for your great works!! I am using a newly bought GT-King (S/N starts w/B922HQK) but it couldn't boot up successfully... I had once booted into the Android and see everything properly, but then it cannot boot into the home screen anymore - before I flash the ROM it keeps rebooting and showing Beelink's logo; after I USB-flash the ALVATECH (B922) ROM it stays showing the ALVATECH logo but never goes next (at least I have been waiting for 15 mins already...

Do you have any clue? I'm sure I didn't change any options about the ERASE ALL.

Thank you in advance~

It sounds to me like you're saying this was acting this way from the start and even with the original ROM / OS, if so then I would think the box is defective. The only thing I could tell you is to keep trying to flash the box to see if you can get a successful working flash. I would try to flash with the stock ROM from Beelink. You can find it on their forum and just make sure it's made for your serial number. If you keep trying and can't get it going successfully then I would return it immediately since it's brand new.
Thank you,

Alvatech

[andytplam]

Hi ALVATECH , Thanks for your great works!! I am using a newly bought GT-King (S/N starts w/B922HQK) but it couldn't boot up successfully... I had once booted into the Android and see everything properly, but then it cannot boot into the home screen anymore - before I flash the ROM it keeps rebooting and showing Beelink's logo; after I USB-flash the ALVATECH (B922) ROM it stays showing the ALVATECH logo but never goes next (at least I have been waiting for 15 mins already...

Do you have any clue? I'm sure I didn't change any options about the ERASE ALL.

Thank you in advance~

[tombraga]

A friend made today the firmware update and said, not many changings.

only the homescreen with dark background now and notification bar above disappeared - so nothing special

[ALVATECH]

So you think, there will come other update soon? The last update from Beelink was few days ago, i think this https://forum.freaktab.com/forum/tv-...976#post782976

And i thought you will make un update of your rom based on this last firmware. Or you will wait for other update which they will release again soon as you said?

Yes, I was thinking of releasing one based off of the latest OTA, which is the one you mentioned. But still busy with some other things at the moment. Doesn't seem like they've done any major changes. But everyone always wants the latest versions. So trying to get some time to get things going.
Thank you,

Alvatech

[tombraga]

I seem to understand you a little better now. Yeah it's because you didn't have TWRP permanently installed the first time around this is why. You could always wait for them to release an actual ROM img file and keep it for safe keeping if you like, I'm sure they'll be release something again soon anyways.
Thank you,

Alvatech

So you think, there will come other update soon? The last update from Beelink was few days ago, i think this https://forum.freaktab.com/forum/tv-...976#post782976

And i thought you will make un update of your rom based on this last firmware. Or you will wait for other update which they will release again soon as you said?

[ALVATECH]

Before i installed your rom, i had the TWRP only temporarely, not fixed installed. I always had to start the TWRP with official TWRP app.
This might be the reason, that before ota update worked, because it restarted to normal firmware recovery...

I like your rom and i already returned and i will wait for your update. I am happy with your rom, my idea was only to keep my firmware backup updated with newest firmware. But i don?t need it really, because i will go on with your rom,

Thanks for all.

I seem to understand you a little better now. Yeah it's because you didn't have TWRP permanently installed the first time around this is why. You could always wait for them to release an actual ROM img file and keep it for safe keeping if you like, I'm sure they'll be release something again soon anyways.
Thank you,

Alvatech

[tombraga]

Before i installed your rom, i had the TWRP only temporarely, not fixed installed. I always had to start the TWRP with official TWRP app.
This might be the reason, that before ota update worked, because it restarted to normal firmware recovery...

I like your rom and i already returned and i will wait for your update. I am happy with your rom, my idea was only to keep my firmware backup updated with newest firmware. But i don?t need it really, because i will go on with your rom,

Thanks for all.

[ALVATECH]

I am on your build right now, ALVATECH and i wanted to update the firmware from Beelink and then (after making the backup again with new firmware) i will install again your rom.

So i restored with TWRP the firmware backup i had made before, everthing ok and i initiated the ota update with wifi connection and downloades 100%, all ok, then restarted to update the firmware.

But it goes to TWRP main menu and keep there,now updating automatically.

Before i instalalled your rom i the ota update which i made one time, worked perfectly, what can i do?

Honestly, this is kind of hard to understand. But if your box still has TWRP on it then you didn't update to Beelink's latest firmware properly or at all. If you're installing TWRP after, then this can cause an issue with Beelink's OTA. So I would say flash Beelinks latest version if you like then immediately install OTA if it's available. But if it's not on this ROM anymore it's out of my hands if it still doesn't work correctly. You'll need to get a hold of Beelink for help. Not sure what you're trying to accomplish. I'm starting to think you're trying to get OTA but want to keep TWRP, if so that can cause issues I can't help you there. Best thing to do is flash from scratch if you keep having problems.
Thank you,

Alvatech

[tombraga]

I am on your build right now, ALVATECH and i wanted to update the firmware from Beelink and then (after making the backup again with new firmware) i will install again your rom.

So i restored with TWRP the firmware backup i had made before, everthing ok and i initiated the ota update with wifi connection and downloades 100%, all ok, then restarted to update the firmware.

But it goes to TWRP main menu and keep there,now updating automatically.

Before i instalalled your rom i the ota update which i made one time, worked perfectly, what can i do?