Android 13 ATV AMLOGIC S912 (Lineage OS 20) LPDDR3

[soldiaz]

This is what - I guess - is running on my vorke. I dont need display so it is fine for me

[ppromo47]

Which ROM works on your device? Send me the link. I will implement it there

This one boots.

lineage-19.1-20240118-UNOFFICIAL-h96pro.tar.xz
https://drive.google.com/file/d/13ys...w?usp=drivesdk

[ppromo47]

Which ROM works on your device? Send me the link. I will implement it there

Originally posted by bumerc View Post
Firmware based on LOS-19.1 ATV12 + gapps
For H96pro+ 3/32 set-top boxes

Fixed Wi-Fi - BT issue

Revision support:
CZ-S32-V5 (LPDDR3) 3g
CZ-S32-V6 (LPDDR3) 3g
CZ-S32-V6.1 (LPDDR3) 3g

WiFi-BT - HS2834A (QCA9377)
1000M eth

Wi-Fi, BT, LAN, USB ports, native remote control, complete shutdown of LEDs in hibernation mode, on. - blue, sleep - red.

download

https://drive.google.com/file/d/13ys8Vv-voOyP-ojZAXVDE6Bxms_10ALH/view?usp=drivesdk

Your link mentioned above works fine.

LOS 20 by HighwayStar also boots fine but WIFI and Bluetooth is broken.

[bumerc]

The rom is stuck on boot logo, I can use customisation tool unpack this rom and manuly paste into working ROM, but I dont know which specific file to look for.
can you help which files should I transfer?

Which ROM works on your device? Send me the link. I will implement it there

[ppromo47]

- add VFD support (TX92)
- add ir-remote cfg (TX92)

not tested because no test device
download

The rom is stuck on boot logo, I can use customisation tool unpack this rom and manuly paste into working ROM, but I dont know which specific file to look for.
can you help which files should I transfer?

[ppromo47]

- add VFD support (TX92)
- add ir-remote cfg (TX92)

not tested because no test device
download

I was on vacation, hence the delay in responding.
After flashing this file its stuck on Android boot logo screen, reverting back to previous build.
Note : I have LPDDR RAM 3/32 GB config

[bumerc]

Can I use this with los 20?

Yes it is all the same except sepolicy version, you have to change this to 33

[soldiaz]

Can I use this with los 20?

[bumerc]

- add VFD support (TX92)
- add ir-remote cfg (TX92)

not tested because no test device
download

[bumerc]

Thank you for all your effort, I dont have skills or powerfull PC to be able to do this , I will live without it ...

Just on other note, I have switched to your builds and the bluetooth work but refuses to identify MI remote, I am using a app to manully pair the remote however after every reboot the connection is lost and I have to redo the entire process again.

Another question : is the IR working, I was wondering if the original remote cfg would work if I manually add it.

bt remote pairing was only fixed in los-20. I will send you the vendor partition with vfd support for your device at the weekend. IR-remote key codes must be inserted into the dts, I will also send this

[soldiaz]

Must be added within DTB.

Easier to program Airmouse

[ppromo47]

I have now created a repo on github. Take a look and create similar files for your device. I have already prepared the Openvfd driver and YAopenvfD daemon for build inline. If you have any questions, feel free to ask

Thank you for all your effort, I dont have skills or powerfull PC to be able to do this , I will live without it ...

Just on other note, I have switched to your builds and the bluetooth work but refuses to identify MI remote, I am using a app to manully pair the remote however after every reboot the connection is lost and I have to redo the entire process again.

Another question : is the IR working, I was wondering if the original remote cfg would work if I manually add it.

[bumerc]

No problem, I do understand your situation, thank you for your response.

I have now created a repo on github. Take a look and create similar files for your device. I have already prepared the Openvfd driver and YAopenvfD daemon for build inline. If you have any questions, feel free to ask

[ppromo47]

You have to compile the driver and the daemon first. In A13 the bt stack was changed, there were problems with the hci interface. I haven't followed up on how it was fixed, but I couldn't use libbt-vendor for qca bt in los20. Patches are only on my PC, I didn't have time to put it on github. A guide would be too extensive, no time for that, maybe later

No problem, I do understand your situation, thank you for your response.

[bumerc]

Ok I tried YAopenvfD from the link below, however when I run the command to check "modinfo openvfd" or "ls /proc/device-tree/openvfd" both says not found.

https://github.com/7Ji/YAopenvfD?tab=readme-ov-file

is there a readme or tutorial on how you got it working.

I am inclined at using A13 hence I wanted to check if there is patch for WIFI and Bluetooth which can be flashed on LOS20

You have to compile the driver and the daemon first. In A13 the bt stack was changed, there were problems with the hci interface. I haven't followed up on how it was fixed, but I couldn't use libbt-vendor for qca bt in los20. Patches are only on my PC, I didn't have time to put it on github. A guide would be too extensive, no time for that, maybe later