Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
[0x32030201]Uboot/Get result/DiskInitial error
Collapse
X
-
Same error 100m firmwareYou may only view thumbnails in this gallery. This gallery has 1 photos.1 Photo
-
Originally posted by ath156 View Post
That should have been the 1st thing to tell !!!!!!!!! That's why anybody with any problem should describe in detail his TVbox and the problem !. All firmwares for 1GB Lan are incompatible with your TVbox !
Anyway.
Download and install the following firmware (in the usual way - probably you won't even need to short the 2 pins !!).
Good luck.
Thanks a lot. I will try it
I used first tvbox and i dont know differents. i saw writing under the box 100m . Its my device.
You may only view thumbnails in this gallery. This gallery has 1 photos.1 Photo
Leave a comment:
-
Originally posted by f0x View Post
Last 1 mounth. Its 100m
and i try your custom firmware its same error %7 uboot/get result/ diskintial error
Anyway.
Download and install the following firmware (in the usual way - probably you won't even need to short the 2 pins !!).
Good luck.
Leave a comment:
-
Originally posted by ath156 View Post
And something very important that I forgot to ask you. When did you buy this HK1 Box ???
Because in the past 1-2 months there were some HK1 Boxes sold with only 100Mbps Lan, while all other TVboxes of this "family" have 1.000Mbps Lan !!!!!
HK1 Box with 100Mbps Lan need special firmware.
and i try your custom firmware its same error %7 uboot/get result/ diskintial error
Leave a comment:
-
Originally posted by f0x View Post
Okey. I try it. Thanks again.
Because in the past 1-2 months there were some HK1 Boxes sold with only 100Mbps Lan, while all other TVboxes of this "family" have 1.000Mbps Lan !!!!!
HK1 Box with 100Mbps Lan need special firmware.
Leave a comment:
-
Originally posted by ath156 View Post
If you want try to install my custom firmware from here: https://forum.freaktab.com/forum/tv-...amlogic-s905x3
- follow the instructions
- use UBT 2.2 (do not forget the licence folder !!)
- use a short USB-A/USB-A cable (better less than 30cm long)
Leave a comment:
-
Originally posted by f0x View PostI have this problem.
my device has became very slow.
And image frozen. And i used power off/ on I try recovery button Later its dont open
I try flash firmware and its error %7 formating....
error code 0x32030201 uboot/ get result / diskinitial error
Try flash firmware again used shortpin but its same error.
Thanks for help
- follow the instructions
- use UBT 2.2 (do not forget the licence folder !!)
- use a short USB-A/USB-A cable (better less than 30cm long)
Leave a comment:
-
I have this problem.
my device has became very slow.
And image frozen. And i used power off/ on I try recovery button Later its dont open
I try flash firmware and its error %7 formating....
error code 0x32030201 uboot/ get result / diskinitial error
Try flash firmware again used shortpin but its same error.
Thanks for help
Leave a comment:
-
Oh thanks. I see now. I try it. But dont reaction device. I think my device dead
Leave a comment:
-
What's Going On
Collapse
There are currently 8604 users online. 4 members and 8600 guests.
Most users ever online was 16,134 at 08:28 on 08-11-2023.
Leave a comment: