Announcement

Collapse
No announcement yet.

Problem with TV BOX H96 PRO Plus Amlogic S912 Octa core Android 7.1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    Problem with TV BOX H96 PRO Plus Amlogic S912 Octa core Android 7.1

    I bought TV box H96 pro plus and we are using this box one month. After one month it doesn´t work. Unfortunately I don´t know why. When I tried to launch box on the TV and switched source for this box, there are only black screen with no signal. Box are ON (blue LED light burns), but it´s not possible to switch OFF, it´s not possible reset box, and also different cable doesn´t work. Do you have any tip for solution? I can try to make complaint, but it´s bought through **** from china. Thanks for tips!

    #2
    Originally posted by do_poctu View Post
    I bought TV box H96 pro plus and we are using this box one month. After one month it doesn´t work. Unfortunately I don´t know why. When I tried to launch box on the TV and switched source for this box, there are only black screen with no signal. Box are ON (blue LED light burns), but it´s not possible to switch OFF, it´s not possible reset box, and also different cable doesn´t work. Do you have any tip for solution? I can try to make complaint, but it´s bought through **** from china. Thanks for tips!
    Hi ,

    think you have the same Problems like other H96Pro+ Users here , u must flash new ,

    but important to know are the Specs for the right Rom , Wifichip , DDR Chip .... , please

    read first some of the H96Pro+ Threads for more Infos , small Hint a better Powersupply

    helps , 5V / 3000mah is okay .

    greetings / gefattern

    Comment


      #3
      Thanks a lot! I thought that it´s destroyed.
      Maybe one more question - how can I find out if I have 5V/3000mah?

      Currently I can see on the charger + blackbox these information:

      Charger:
      - AC/DC adapter
      - Model: JKX-912
      - Input: 110-240V AC, 50/60Hz 0,3A
      - Output: 5V DC 2A

      Blackbox:
      - CPU: S912
      - RAM: 3GB
      - OS: Android 7.1
      - ROM: 32GB

      Anyway, I have one more question - is it neccessary to make flash through MMC card or is it possible to do it through USB port? Is it possible to do it without any signal?

      Comment


        #4
        Output: 5V DC 2A

        5V/ 2000mah

        Comment


          #5
          Before flashing, check to see if all your T.V HDMI ports result in black screen. (v1.4 vs v2.0+)

          Personal experience...bricked once by SD card method, have not bricked once with Amlogic Burn Tool (50+ times).

          Comment


            #6
            I tried all hdmi ports, also different cable and different TV.
            its out of my mind that it doesnt work 3 weeks after first using device. I didnt do any change of device (no root, no flash).

            Okay then, I will try to find correct version of android and will try to make new flash.

            Two other questions:
            1. Is it possible to make flash through USB or is it neccesarry microsd card?
            2. Is it the same version of android like before or its different one?

            Thanks a lot for all hints and your posts. Its very helpful.

            Comment


              #7
              Hello again,

              I connected my H96 pro plus with PC via USB cable and tried to connect device (through Amlogic USB burning tool 2.0.9) - there´s error message "Get key failed". What happens, please?

              Edit: aha, it´s bad file, I guess.

              But I have no signal when I plug the HDMI to the TV. Maybe it´s problem with this: https://www.youtube.com/watch?v=BL05PrgvO0E

              What do you think?
              Last edited by do_poctu; 01-03-2018, 12:02.

              Comment


                #8
                "Get key failed" that mean you need license copy it to license folder inside USB burning tool 2.0.9 folder try this in attach
                Attached Files

                Comment


                  #9
                  Originally posted by do_poctu View Post
                  Hello again,

                  I connected my H96 pro plus with PC via USB cable and tried to connect device (through Amlogic USB burning tool 2.0.9) - there´s error message "Get key failed". What happens, please?

                  Edit: aha, it´s bad file, I guess.

                  But I have no signal when I plug the HDMI to the TV. Maybe it´s problem with this: https://www.youtube.com/watch?v=BL05PrgvO0E

                  What do you think?
                  follow up to see if you are able to fix this?
                  casue I have the same issue. Mine only worked for 2 days

                  Comment


                    #10
                    hallo, leave all things apart, at first just get a new 5vot 3amp power adopter and most probablly all of your problems gone, in 99%cases it is the bad power adopter, so just try with a new one and you did not need to flash or format your box.

                    Comment


                      #11
                      Originally posted by maxim33 View Post
                      hallo, leave all things apart, at first just get a new 5vot 3amp power adopter and most probablly all of your problems gone, in 99%cases it is the bad power adopter, so just try with a new one and you did not need to flash or format your box.
                      Hi ,

                      i think you are right , but a good supported CustomRom , like the one of the

                      great Dev. Superceleron can make this Box much better .

                      But if you want to try , remember the two different PCB types green/blue and

                      needed Roms !!!

                      greetings / gefattern

                      Comment

                      Working...
                      X