Firmware version: Build number 905P0 re sorted after testing

[trebor]

Now tested look like they had the order wrong from what box does what rom

After extensive testing 2 burns

the order is now correct


Firmware version: Build number 905P0
System: Android verson 9.0

Repair:
1. Add the top status bar
2. Optimize the compatibility of Ethernet cards to some Gigabit routers.
3. The version number is changed to 905P0

Note：

922X version 904P0 can be upgraded to 905P0
OTA;B922 version 902P0 can be upgraded to 905P0 too.

This version is available for the 922X and B922 version.

Brush tool download link (GT1-king must use this latest brush tool, the old brush tool can not be used):
https://beelink-my.sharepoint.com/:u...Da1BlLRZqg?e=O mS3tg

Firmware and Brush tutorial download link (includes USB cable firmware, SD card brush firmware, Brush tutorial three files):

S/N code：B922 :
https://beelink-my.sharepoint.com/:f...BsuD6LVxJQ?e=M lDKty

S/N code：922X:
https://beelink-my.sharepoint.com/:f...Lt0tG2e1hA?e=Z Sbmcb

Tip: You must distinguish between the S/N code on the back of the two machines, otherwise the box will be damaged!


Beelink Official：www.bee-link.com
Service email: [email protected]
Beelink Youtube: http://t.cn/RDp97bi
Beelink Facebook：https://www.facebook.com/Beelink.fans/
Beelink instagram：https://www.instagram.com/beelink_official/


Make sure you have the correct version firmware for the correct model printed on underside of box

Thank gatos814 for the heads up

[Kloeterkong]

The New Firmware solved my Ethernet Problem!
Cool!!! Statusbar ok!

[MiguelWPB]

New firmware solved the Setting/Location problem. It is On, now.

[pel.hu]

Until now I saw B922 serial for DDR4 RAM version and 922X serial for LPDDR4.

[pel.hu]

Double post. Please delete.

[gatos814]

As Found:

Firmware version: Build number 905P0
System: Android verson 9.0



S/N code：922X（DDR4）:
https://beelink-my.sharepoint.com/:f...BsuD6LVxJQ?e=M lDKty

S/N code：B922（LPDDR4）:
https://beelink-my.sharepoint.com/:f...Lt0tG2e1hA?e=Z Sbmcb

Tip: You must distinguish between the S/N code on the back of the two machines, otherwise the box will be damaged!


Make sure you have the correct version firmware for the correct model printed on underside of box

Dear @trebor
Change the descriptions and the firmwares to the right order!
It's Beelink's fault!

[trebor]

Updated to reflect correct firmware to rom:
https://forum.freaktab.com/forum/tv-...ing#post783986




Tested on B922 and 922 all good NOW

[MiguelWPB]

Is there a solution for the weather (I'm West Palm Beach, Florida, USA)?

Thank you

Miguel

[MiguelWPB]

Key Enter on my mini physical keyboard isn't working. Tap & Drag isn't working, too.

Miguel

[theholyguy]

it says the downloads link is down... beelink always top :P

[kamerzeekoetje]

I am sorry, but my box is not better after this update, but even worse. My cabled network connection is constantly lost. It is cabled to my Ziggo-router/modem. Only when I use WIFI my connection s stable and doesnt turn off by itself.
I gave it a static ipadress in my router/modem.(standard gateway 192.168.178.1) I tried to use an app called automate to keep my connection up (with ethernet connecction flow enabled), but even then my connection is connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected-connected-disconnected.
GRRRRRRRRRRRR..get the idea? Can someone help me out with this one?