Announcement

Collapse
No announcement yet.

MK808 with Finless 2.1 freezing after turning wifi on - requires shorting pins and reflash to boot

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    MK808 with Finless 2.1 freezing after turning wifi on - requires shorting pins and reflash to boot

    Hello,

    I have an MK808 with Finless 2.1 that freezes after turning wifi on, which then requires shorting pins on the NAND chip to get windows to detect it again so I can reflash to boot back into it.

    After it freezes it goes to the finless boot screen and has some loading activity for a short while before that freezes too.

    I have removed the grounding on the antennas to fix this units known WIFI issue.

    Any help would be greatly appreciated,
    Thanks
    Last edited by veisz; 10-04-2014, 22:13.

    #2
    Over the past year I`ve had about 8 or 10 mk808b that required shorting pins on the NAND chip.

    Unfortunately every time each unit would stop working again, sometimes after 10min, 2 hours or a few days even 1 or 2 months, but all failed again ... eventually shorting the pins did not work anymore.

    Unit is defective.

    Comment

    Working...
    X