Announcement

Collapse
No announcement yet.

unknown box rk3229

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    unknown box rk3229

    Hello everybody. there is a 1/8 box. with version 7.1. from provider with 1 application. I want to flash a normal os. but on all versions gives an error test device fail. I can not erase or write. how do i flash a box?

    #2
    Originally posted by nezlos View Post
    Hello everybody. there is a 1/8 box. with version 7.1. from provider with 1 application. I want to flash a normal os. but on all versions gives an error test device fail. I can not erase or write. how do i flash a box?
    Hi ,

    first you need the right Rom , for RK3229 with correct Wifidrivers ,
    what stands on the Sticker ???

    good luck / gefattern

    Comment


      #3
      Originally posted by gefattern View Post

      Hi ,

      first you need the right Rom , for RK3229 with correct Wifidrivers ,
      what stands on the Sticker ???

      good luck / gefattern
      hi. wifi SSV6051p. I tried firmware from Scishion V88, and like that rk3229. but on all versions gives an error test device fail.

      Comment


        #4
        Originally posted by nezlos View Post

        hi. wifi SSV6051p. I tried firmware from Scishion V88, and like that rk3229. but on all versions gives an error test device fail.
        Hi ,

        can you get it into MaskRomMode ??? ,

        greetings / gefattern

        Comment


          #5
          Originally posted by gefattern View Post

          Hi ,

          can you get it into MaskRomMode ??? ,

          greetings / gefattern
          this error in MaskRomMode

          Comment


            #6
            Originally posted by nezlos View Post

            this error in MaskRomMode
            Hi ,

            what are this strange Cable on the Nand , this can cause the Error ,

            no need for this to reach MaskRomMode , if possible , take it away ,

            but maybe the Box is full bricked because of this ....

            greetings / gefattern

            Comment


              #7
              Originally posted by gefattern View Post

              Hi ,

              what are this strange Cable on the Nand , this can cause the Error ,

              no need for this to reach MaskRomMode , if possible , take it away ,

              but maybe the Box is full bricked because of this ....

              greetings / gefattern
              this button for MaskRomMode. i tried whithout Cable, but not work. box new and worked. i cant erase or flash nand.

              Comment


                #8
                Originally posted by nezlos View Post

                this button for MaskRomMode. i tried whithout Cable, but not work. box new and worked. i cant erase or flash nand.
                Hi ,

                it must work without Cable ,

                connect the Pins , with a small piece of copper cable or similar ,

                hold it , connect Power , then you will hear and see connected in

                MaskRomMode , now you can stop holding pins , after this you must

                "restore" with correct Rom .

                Maybe your PCB is fully bricked because it already fails the test Device ,

                good luck / gefattern

                Comment


                  #9
                  Originally posted by gefattern View Post

                  Hi ,

                  it must work without Cable ,

                  connect the Pins , with a small piece of copper cable or similar ,

                  hold it , connect Power , then you will hear and see connected in

                  MaskRomMode , now you can stop holding pins , after this you must

                  "restore" with correct Rom .

                  Maybe your PCB is fully bricked because it already fails the test Device ,

                  good luck / gefattern
                  pcb new and working. button is soldered to the cable. I press it when I connect usb. then I release the button. I have flashed many times rk devices.. I think the bootloader is write-protected.

                  Comment


                    #10
                    Originally posted by nezlos View Post

                    pcb new and working. button is soldered to the cable. I press it when I connect usb. then I release the button. I have flashed many times rk devices.. I think the bootloader is write-protected.
                    Hi ,

                    i think that this cheap Boxes build like that , if you try to flash other Rom , it bricks the

                    Loader or similar , somewhere is read that shorting the last two Pins of the Nand does

                    something special but not sure what and if it helps ??? , hope you find a Solution ,

                    good luck / gefattern

                    Comment


                      #11
                      Originally posted by gefattern View Post

                      Hi ,

                      i think that this cheap Boxes build like that , if you try to flash other Rom , it bricks the

                      Loader or similar , somewhere is read that shorting the last two Pins of the Nand does

                      something special but not sure what and if it helps ??? , hope you find a Solution ,

                      good luck / gefattern
                      that's funny. I reinstall windows and flash the box)).

                      Comment


                        #12
                        Originally posted by nezlos View Post

                        that's funny. I reinstall windows and flash the box)).
                        Hi ,

                        do you mean you installed Windows10 new , after that flashing Stockrom

                        worked again , really strange ,

                        good luck / gefattern

                        Comment

                        Working...
                        X