My motherboard Scishion V88 mini 1/8 GB, RK3229, wifi 6051p is: MX4MN-V13
Google translator:
I spent the last year searching for a suitable firmware for this TV box.
I tried about 20 of them. Half of them sent me a TV box into the brick (I had to open the TV Box and use a screwdriver to reset the NAND chip). From the other half are only 4 firmware suitable for this TV box (all four of them work wifi chip 6051p and remote control).
All firmware uploads as "Restore" - not "Upgrade".
USB (OTG) to upload firmware using a computer is the third in order (see picture).
Here they are:
Android 6.0.1
rk322X_6.0_box_MX1_V88-MARS-II_SSV6051p_SpecTek_flash-update_20171229.img
Boot version: 2.32
It is the official (yet only) firmware published on China Gadgets Reviews Firmwares
Download file "2094871 SCISHION V88 mini TV Box ROM firmware pack.rar" here:
https://drive.google.com/file/d/122A...ew?usp=sharing
Android 6.0.1
rk322X_6.0_box_MX4N_SSV6051p_SpecTek_flash-update_20171011.img
Boot version: 2.32
This firmware is about 15-20 percent faster than rk322X_6.0_box_MX1_V88-MARS-II_SSV6051p_SpecTek_flash-update_20171229.img
Download file "V88_RK3229_11102017_AndroidPc_Es.rar" here:
https://drive.google.com/open?id=1Iz...GSUf_tZV4xmkwk
Android 7.1.2
Leelbox IR
Boot version: 2.37
I found this firmware on the Russian 4PDA site
Download file "Leelbox IR - Android 7.1.2 for Scishion V88 mini 1-8 GB MX4MN-V13.zip"
https://drive.google.com/file/d/1_0f...ew?usp=sharing
Android 8.1.0
RK3229_HK1_MINI_SSV6051_8.1.0_20181217.2200.img
Boot version: 2.38
I found this firmware on the Russian 4PDA site
On this page, this is the only version that has a color space RGB8 bit switch if a pink screen appears on an old TV. When you first press the RGB8 switch, the screen turns green - just turn the TV box off and on, and the green/pink screen will no longer appear.
WARNING!
On the China Gadgets Reviews Firmwares website, there are newer versions of the HK1 mini RK3229 TV box: however, they have the 2.54 and 2.56 boot versions that will send the TV box to the brick. Only the noroot firmware version 2.38, which is listed there, can be installed - but in this noroot version (2.38) from China Gadgets Reviews Firmwares about half of the apk in the Google Store is not showing - noroot version is faulty.
To upload this firmware, use FactoryTool v1.52 (Android will not start with BatchTool) !!!
Download file "RK3229_HK1_MINI_SSV6051_8.1.0_20181217.2200 - to V88 mini 1-8GB.zip" here:
https://drive.google.com/file/d/1_xy...ew?usp=sharing
IMPORTANT INFO: I apologize very much, but by February 7, 2020, 07:55 (Slovak time), there was a link to the bad "noroot" version of HK1 mini Android 8.1.0. The right version is now available for download: this version is not listed on China Gadgets Reviews Firmwares. Excuse me. I'm going to cry to the corner of the room.
IMPORTANT INFO 2: (published February 21, 2020)
Windows 10 with the new update will not run Factory Tool v1.52 or any other versions. If you have the same problem, use a computer running a different version of Windows to run Factory Tool v1.52. In Windows 7 Pro, the Factory Tool v1.52 is still working properly. You can upgrade the Android 6 and 7 versions listed here with RockChip Batch Tool v1.8, which works properly on Windows 10. Android 8 restore Scishion V88 mini 1/8 GB only using Factory Tool 1.52 (RockChip Batch Tool v1.8 does not run the first time Android 8 starts properly).
INFO PICTURES
Android 6.0.1 Launcher (both versions)
Android 7.1.2 Launcher
Android 8.1.0 Launcher
Info
USB (OTG) Scishion V88 Mini 1/8GB is third in order
Good luck
Comment