Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

CWM For Allwinner A31 box

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    CWM For Allwinner A31 box

    We are pleased to present this version of CWM supporting TVBox MeLE Allwinner A31 family and possibly other devices with the same SOC. This compilation has been developed by MSX2 from androidpc.es and me for all users, we hope you like it and you may be able to take full advantage.

    NOTE: Other devices are not supported.

    CWM for Alwinner A31box
    Last edited by daemonium; 02-04-2014, 17:56.
    There are 10 types of people in the world: Those who understand binary, and those who don't...

    If you want to buy me a beer, please use this -> https://www.paypalobjects.com/en_US/..._donate_SM.gif

    #2
    Fits to a A31S?

    Comment


      #3
      Re: CWM For Allwinner A31 box

      Originally posted by fps-dum View Post
      Fits to a A31S?
      i didn't tried in a31s but it will probably work. Give it a try, if it doesn't work, just flash over your rom again.
      Feedback is so much appreciated
      There are 10 types of people in the world: Those who understand binary, and those who don't...

      If you want to buy me a beer, please use this -> https://www.paypalobjects.com/en_US/..._donate_SM.gif

      Comment


        #4
        What about Allwinner A31 tablets?

        JDfense

        Comment


          #5
          Re: CWM For Allwinner A31 box

          Originally posted by JDfense View Post
          What about Allwinner A31 tablets?

          JDfense
          just try it, if it doesn't work, pm me with a link to your firmware and i'll have a look.
          There are 10 types of people in the world: Those who understand binary, and those who don't...

          If you want to buy me a beer, please use this -> https://www.paypalobjects.com/en_US/..._donate_SM.gif

          Comment


            #6
            Okay thanks. I'll check it with my new colorfly e708 q1 tablet, but I need some time. At first I have some other problems with my cs968 to fix and then learn the basic stuff of Allwinner ROMs.

            JDfense

            Comment


              #7
              I did a test.. on mk823 (a31s)

              Installed update.zip.. reboot to recovery.. and navigated abit
              -based recovery by deamonium and mx2 for site

              The bad..
              There is no : Directory-up option (navigate using mouse)( no-way to get back to main screen)
              Unable to boot into android, anymore

              Perhaps you could add a editor.. to make small changes and read the log files?

              Backup and restore > backup to external sdcard
              -i don't think it did anything, les then a sec.. to menu again
              Backup: mount backup path
              Mount and storage: cannot navigate back
              Boot system now: nope.. reboots to recovery again ( same as removing powercord, and powering unit again)
              W log: unable to mount /dev/block/nandh
              Advanced> boot recovery : boots to recovery

              Comment


                #8
                Re: CWM For Allwinner A31 box

                Originally posted by mitchell4you View Post
                I did a test.. on mk823 (a31s)

                Installed update.zip.. reboot to recovery.. and navigated abit
                -based recovery by deamonium and mx2 for site

                The bad..
                There is no : Directory-up option (navigate using mouse)( no-way to get back to main screen)
                Unable to boot into android, anymore

                Perhaps you could add a editor.. to make small changes and read the log files?

                Backup and restore > backup to external sdcard
                -i don't think it did anything, les then a sec.. to menu again
                Backup: mount backup path
                Mount and storage: cannot navigate back
                Boot system now: nope.. reboots to recovery again ( same as removing powercord, and powering unit again)
                W log: unable to mount /dev/block/nandh
                Advanced> boot recovery : boots to recovery
                thanks for the feedback, i'm sorry it's not working for you. can you provide a link to your actual firmware?
                There are 10 types of people in the world: Those who understand binary, and those who don't...

                If you want to buy me a beer, please use this -> https://www.paypalobjects.com/en_US/..._donate_SM.gif

                Comment


                  #9
                  Ohh.. hi
                  If you seek to make custom version then please make one for the CS918S (firmware can be found in this forum)

                  I just installed the update.zip on my mk823 unit.. to analyze the risk
                  -nothing more

                  Cheers.. and keepup the good work

                  Comment


                    #10
                    Re: CWM For Allwinner A31 box

                    Originally posted by mitchell4you View Post
                    Ohh.. hi
                    If you seek to make custom version then please make one for the CS918S (firmware can be found in this forum)

                    I just installed the update.zip on my mk823 unit.. to analyze the risk
                    -nothing more

                    Cheers.. and keepup the good work
                    i was asking for the firmware because my intention is to modify this cwm to make it work on mk823. which box do you have? are mk823 and cs918s actually the same box?
                    There are 10 types of people in the world: Those who understand binary, and those who don't...

                    If you want to buy me a beer, please use this -> https://www.paypalobjects.com/en_US/..._donate_SM.gif

                    Comment


                      #11



                      are mk823 and cs918s actually the same box?
                      No.. ( mk823 = stick // cs918s = tvbox )
                      There many users here at freaktab h'own a cs918s box (like me)

                      But the cs918s firmware can be installed on the mk823 (safemodus)
                      -so, if CWM fails on the mk823, it will mostliky also fail on cs918s
                      --cs918s is my star player

                      Cheers

                      Comment


                        #12
                        Re: CWM For Allwinner A31 box

                        Originally posted by mitchell4you View Post
                        http://www.freaktab.com/showthread.php?8841-New-CS918S



                        No.. ( mk823 = stick // cs918s = tvbox )
                        There many users here at freaktab h'own a cs918s box (like me)

                        But the cs918s firmware can be installed on the mk823 (safemodus)
                        -so, if CWM fails on the mk823, it will mostliky also fail on cs918s
                        --cs918s is my star player

                        Cheers
                        ok then i'll go for cs918s
                        There are 10 types of people in the world: Those who understand binary, and those who don't...

                        If you want to buy me a beer, please use this -> https://www.paypalobjects.com/en_US/..._donate_SM.gif

                        Comment


                          #13
                          This is my first attempt to make cwm work for CS918s , hope it will work
                          CWM
                          https://dl.dropboxusercontent.com/u/346057/CWM_for_CS918s.zip

                          App for reboot
                          Last edited by daemonium; 02-04-2014, 20:41. Reason: add reboot apk
                          There are 10 types of people in the world: Those who understand binary, and those who don't...

                          If you want to buy me a beer, please use this -> https://www.paypalobjects.com/en_US/..._donate_SM.gif

                          Comment


                            #14
                            Originally posted by daemonium View Post
                            This is my first attempt to make cwm work for CS918s , hope it will work
                            https://dl.dropboxusercontent.com/u/...for_CS918s.zip
                            Any instruction that how to install this would help?
                            Thanks

                            Comment


                              #15
                              Originally posted by albaniansniper View Post
                              Any instruction that how to install this would help?
                              Thanks
                              Yes, sorry i forgot that :P
                              - Copy the zip file and reboot.apk in a USB memory
                              - Install the app reboot
                              - Run the upgrade system app in your A31 box
                              - Search for LOCAL updates
                              - Execute local update
                              - The system will reboot
                              - After reboot, use the app to reboot into recovery mode
                              Attached Files
                              There are 10 types of people in the world: Those who understand binary, and those who don't...

                              If you want to buy me a beer, please use this -> https://www.paypalobjects.com/en_US/..._donate_SM.gif

                              Comment

                              Working...
                              X