G910 gamepad

[Buster86]

Hi guys , this is my first post so I hope it goes correct i recently received my minix x7 and g910 gamepad
I connected it to my lap top pressed the select and start button laptop went bing and now the gamepad will not turn on no led lights and when I connect it up the laptop it says no drivers found , have I blown the control panel or fuse in side ?? Or can I fix this ??

[lionsl2005]

Hi guys , this is my first post so I hope it goes correct i recently received my minix x7 and g910 gamepad
I connected it to my lap top pressed the select and start button laptop went bing and now the gamepad will not turn on no led lights and when I connect it up the laptop it says no drivers found , have I blown the control panel or fuse in side ?? Or can I fix this ??

Why did you connect the gampad to the laptop? How did you connect? did you try to update the Firmaware?

[Buster86]

G910 gamepad

After a long time i have managed to understand how it works and have it working now


Sent from my iPhone using Tapatalk

[Buster86]

G910 gamepad

I up dated the firmware and drivers , I used the USB cable to connect it to the lap top , every time ya use it even with the same device ya need to un pair it and repair it and it won't work with all the games on the minix x7 unless you root ur device , and will only work with some Icade games on iOS and for android tablets / phones ya need to map the buttons , very frustrating a simple explanation could of save me loads of time


Sent from my iPhone using Tapatalk

[shiocu]

Motorola Rarz D3

hi guys

I've tried everything I could. BUT I can not pair in X+Home mode with my motorola razr XT919 D3.

Plis help me

[Buster86]

G910 gamepad

Every time you knock off a device u need to re pair it so ; go into settings knock ur blue tooth off the turn it back on and ur device should see the gamepad when u do re-connect , you mite have to map the buttons


Sent from my iPhone using Tapatalk

[shiocu]

Motorola Rarz D3

pliz i cant pair the mode X+Home in my motorola razr D3, the control keep blink the 3 lights of searching

[Buster86]

G910 gamepad

Is it fully charged? Are the lights blinking fast or slow ? Have you up dated the firm ware ?


Sent from my iPhone using Tapatalk

[shiocu]

Motorola Razr D3

Is it fully charged? Are the lights blinking fast or slow ? Have you up dated the firm ware ?


Sent from my iPhone using Tapatalk

Fully charged. Blink fast. I update the firmware and i can pair in APP mode (Y+home), work good but dont pair in gamepad mode ( X+Home).

[Buster86]

G910 gamepad

I'm I'm not mistaken fast means it's nearly dead , there's a couple of videos on u tube on how to connect it also remember it's not comparable with every device in every game is ur device rooted ?


Sent from my iPhone using Tapatalk

[Dan79]

After a long time i have managed to understand how it works and have it working now


Sent from my iPhone using Tapatalk

can you elaborate on how you got the G910 controller to work again? I went and did the firmware update and it turned the lights off the unit, and have had no luck since. I have tried a few times since over the last week, but the unit does not respond.

I want it for my Minix Neo X7, i have a windows 7 64bit machine that doesnt see the controller when plugged in.

Any help would be appreciated.

[Buster86]

G910 gamepad

Ur minix will have to be rooted for it to be used on all games , if you have the firmware install , knock off the bluetooth on ur minix and knock it back on then turn ur g910 on and press y+home and it should connect


Sent from my iPhone using Tapatalk

[Dan79]

Ur minix will have to be rooted for it to be used on all games , if you have the firmware install , knock off the bluetooth on ur minix and knock it back on then turn ur g910 on and press y+home and it should connect


Sent from my iPhone using Tapatalk

I thought you managed to get a unit from showing no lights (appears bricked) to working again. I assume that is not the case.

The minix is rooted, so no problems there. But the unit shows no lights when you turn on it on..... It happened i unsuccessfullly attempted a firmware update.

Thank you anyway.

[Buster86]

G910 gamepad

Yes sounds like wat happened me the drivers aren't install correctly you need to point the gamepad to the drivers , have a look at this video this guy helped me a lot

http://youtu.be/CdL0VrlneEs

Sent from my iPhone using Tapatalk

[Buster86]

G910 gamepad

try this link for firmware and Flashing tool.



Firmware:

https://drive.google.com/file/d/0B7C3r4OdApI4b09ud1pJMkt0QnM/edit?usp=sharing

Flashing Tool:

https://drive.google.com/file/d/0B7C3r4OdApI4NWxaUTkxOVQyVm8/edit?usp=sharing

( open the link go to le and download)




Sent from my iPhone using Tapatalk