MK 809 III manufacturer's firmware

[thehunter]

Hi to all , i've purchased MK 809 III from **** , after 2 hours decided to flash a custom rom , but my problem began after that , no wi-fi , screen blinking and so on... I've contacted the seller and asked him for the firmware and he was very helpfull and gave me it. So i've decided to share it with you so it may help to others like me. The original rom is perfect , runs smoothly , everything works like a charm , Antutu shows a score of 19110, i will post some pictures of the device and the other things , enough talking here is the link from the seller , and after a while i will upload to another sharing site too , i hope it will be usefull

http://yun.baidu.com/share/link?shareid=517643913&uk=1563526649&qq-pf-to=pcqq.c2c

edit:


here is another link:

https://mega.co.nz/#!UdkE2brD!2TiGOgP3qxV50JkkeI6Tffnm5paBZrR8iefh0nZxFDM

http://speedy.sh/pR8UX/rk3188-ap6210131126.img

[h999]

Hi, your Mk809III is exactly the same as mine, take a look at this thread:

<http://www.freaktab.com/showthread.php?10700-The-unsolved-CX919-II-question>

The original stock firmware is here:

<https://mega.co.nz/#!LAZF0Cja!Ekkgjz3l2qbbnwNp9NvDtVogbP8fkBAnvaV8-aO2JcY>

Thanks for the updated stock rom, I'll give it a try!

[thehunter]

Hi, your Mk809III is exactly the same as mine, take a look at this thread:

<http://www.freaktab.com/showthread.php?10700-The-unsolved-CX919-II-question>

The original stock firmware is here:

<https://mega.co.nz/#!LAZF0Cja!Ekkgjz3l2qbbnwNp9NvDtVogbP8fkBAnvaV8-aO2JcY>

Thanks for the updated stock rom, I'll give it a try!

Hi , i've taken a look at your rom size and it seems 170 MBs, and the one i've uploaded is 340MB , mine isn't pre-installed with chinese apps or something else , i will try to flash it and write down if it works with me Thanks for your update

[h999]

Hi , i've taken a look at your rom size and it seems 170 MBs, and the one i've uploaded is 340MB , mine isn't pre-installed with chinese apps or something else , i will try to flash it and write down if it works with me Thanks for your update

Hi, size is 170 MB because of the file compression, once uncompressed it's 339 MB. I took a look at your Rom and It seems pretty much the same as mine. As soon as I have some spare time, I'm gonna flash and test it. Mine doesn't reach more than 16.400 in Antutu...

[sasho]

Hello,
which procedure did you use in order to flash theese roms??

[Petronio]

Thank you a lot!

Hi to all , i've purchased MK 809 III from **** , after 2 hours decided to flash a custom rom , but my problem began after that , no wi-fi , screen blinking and so on... I've contacted the seller and asked him for the firmware and he was very helpfull and gave me it. So i've decided to share it with you so it may help to others like me. The original rom is perfect , runs smoothly , everything works like a charm , Antutu shows a score of 19110, i will post some pictures of the device and the other things , enough talking here is the link from the seller , and after a while i will upload to another sharing site too , i hope it will be usefull

http://yun.baidu.com/share/link?shareid=517643913&uk=1563526649&qq-pf-to=pcqq.c2c

edit:


here is another link:

https://mega.co.nz/#!UdkE2brD!2TiGOgP3qxV50JkkeI6Tffnm5paBZrR8iefh0nZxFDM

http://speedy.sh/pR8UX/rk3188-ap6210131126.img

I have the exactly model of yours (same Antutu score) and you don´t know how many time I spent looking for this ROM.
Thank you so much for your kindliness to post images of the version. Because of them I could find the correct firmware. My stick was bricked due a wrong firmware.
My problem started when I did a "reset factory" and it locked, so I flashed an Official Version from w2comp but it caused the brick (prepare IDB fail).
I unbricked with informations of http://www.freaktab.com/showthread.p...752#post168752 and I used the firmware informed by you.
Thank you so much!

[Magnus33]

This version of the hardware been popping up in different manufactures cases.

Regardless of what the hardware says it doesn't play nice with many of the roms out there but at least now there something to run on it.

[genomitev]

Hi thehunter with that firmware wi fi and bloototh is not working for me.

[Condorello]

Hi thehunter with that firmware wi fi and bloototh is not working for me.

me too, and my stick has ap6210. I reverted to rikomagic latest firmware with sam kernel. Hope to see soon a stable kitkat from finless or neomode for our sticks!