Just recived my ekb311 ?

[108mob]

hi guys just received my ekb311 in the mail today looking into getting some custom firmware wich supports 1080p on here just wanted to know which should i use and if there is a step by step instructions thank you so much !

my box on the underside says

model:ekb311b

factory: ENY technology co.,ltd

[hackadroid]

hi guys just received my ekb311 in the mail today looking into getting some custom firmware wich supports 1080p on here just wanted to know which should i use and if there is a step by step instructions thank you so much !

my box on the underside says

model:ekb311b

factory: ENY technology co.,ltd

You have 2 options

(1) Open the case and see what board you have - Flash the supported ROM
(2) Trial and error - Flash all the available ROMS and see which one works best

To flash your box, you first need change your USB connection type from MTP to Mass Storage and then use the RKFlash tool (version 1.7 works great). Most ROMS come with recovery drivers and a single image file which you select with the flash tool. Press and hold the reset button under your player for 3-5 seconds and wait for the drivers to install. If Windows cannot find the drivers, update manually by navigating to the downloaded ROMS driver directory and update from there.

Once your Android player is detected correctly (Green icon), press the restore button and wait for it to finish flashing and testing

First boot takes the longest

[108mob]

You have 2 options

(1) Open the case and see what board you have - Flash the supported ROM
(2) Trial and error - Flash all the available ROMS and see which one works best

To flash your box, you first need change your USB connection type from MTP to Mass Storage and then use the RKFlash tool (version 1.7 works great). Most ROMS come with recovery drivers and a single image file which you select with the flash tool. Press and hold the reset button under your player for 3-5 seconds and wait for the drivers to install. If Windows cannot find the drivers, update manually by navigating to the downloaded ROMS driver directory and update from there.

Once your Android player is detected correctly (Green icon), press the restore button and wait for it to finish flashing and testing

First boot takes the longest

Cool yea tried removing the 4 screws on the bottom of the box just had a bit of trouble removing the casing ?

[hackadroid]

Cool yea tried removing the 4 screws on the bottom of the box just had a bit of trouble removing the casing ?

Slowly pry open the case starting at the external storage slot. It should start to unclip as you move along

[108mob]

alright thanks hackadroid got it here are some pics looks like to be a q7

[108mob]

anybody know what rom i should use also what xbmc version thanks alot guys !

[108mob]

bump@

[hackadroid]

anybody know what rom i should use also what xbmc version thanks alot guys !

http://www.freaktab.com/showthread.php?9963-Q7-Rk3188-Device-What-Works-amp-Help-Please/page2

[108mob]

http://www.freaktab.com/showthread.p...p-Please/page2

so both lwei and wasser roms work witt the unit ?

[hackadroid]

so both lwei and wasser roms work witt the unit ?

No idea. I own a different board

[108mob]

No idea. I own a different board

just tried flashing the lewi rom the stable version and the box just stays with the red light on updated back to stock hope we can get a custom rom support on this unit it would be highly appreciated ! thank you everyone

[108mob]

Finally got the lag of the video in xbmc by fully flashing the newest stock rom and then just flashing the lewy 123 kernek but lose the function for the stock remote and wifi please someone support a custom rom for this box thank you to all !