Step-By-Step Tourial on how to load Wasser Firmware.....PLEASE

[dudda]

Hello,

I'm looking for a very generous person to load a video, or a step by step on how to load:
Any or BEST firmware from Wasser

On most current firmware there is a brief idea on what do do, but I think more info needs to be added.

Thanks, For all of you hard work you commit to this amazing job you have

P.S.
Very new to this but it looks all so very exciting
Also my board is B351 V2

[buhohitr]

OK, download wasser firmware, unzip, you will see bunch of folders and files. All the image files needed for the tool to flash located in the "rockdev" folder. If you don't have the driver installed, you need to unplug the device, press and hold the reset button on the bottom of the unit while plug in the power and don't let go the button until your pc see the device, when your pc ask for the driver, browse to the "drivers" folder and select the driver for your PC (either x86 for 32 bit like winds xp or x64 bit for wins 7). Once the driver installed correctly, open up the RKdeveloptool. You are going to see item from 1 to 8. put the check mark to ALL except 8(which is for backup only). For each item, at the last column with 3 dots, click on it and it give you the option to browse to the image. Remember all the images are in the "rockdev" folder so just pick the correct image name that corresponded to the item name. Example:
For Item 1 - Loader --browse to file named "RK3188Loader(L)V1.2.bin"
For Item 2 - parameter -- browse to file name "parameter"
For Item 3 - misc -- browse to file name "misc.img"
Ok you got the picture. once you finished item 7, click on Run and it should flash the firmware.
That's it.

Edit: Here some pictures: http://wiki.radxa.com/Rock/flash_the_image
The top section is instruction for RKbatch tool, so Scroll down to "Using RKAndroidTool to falsh image by selection" section.