Yuandao M10 Custom Rom?

[Speedy@1098]

Hello,

is there a custom ROM for the Yuandao M10? Or whitch one I can use for this model?

Thank you for your hints.



Greetings from Germany
Daniel

[rrileypm]

Give me a couple of days and let me see if I can come up with one. I don't have an M10 to test on...so if you are willing to test....we can try.

[Speedy@1098]

Custom Rom / Yuandao M10 flash failed

Give me a couple of days and let me see if I can come up with one. I don't have an M10 to test on...so if you are willing to test....we can try.

Ok, then lets try, I will test it.

Off Topic: Yesterday I bricked my M10 while flashing with rockchip batch tool 1.7 Do you know how I will get it into flashing mode again? I can't switch on the tablet. have tried it with power + Vol. up / down, but the M10 would not start.

Thank you very much.

Daniel

[Speedy@1098]

Custom Rom / Yuandao M10 flash failed

Give me a couple of days and let me see if I can come up with one. I don't have an M10 to test on...so if you are willing to test....we can try.

Ok, then lets try, I will test it.

Off Topic: Yesterday I bricked my M10 while flashing with rockchip batch tool 1.7 Do you know how I will get it into flashing mode again? I can't switch on the tablet. have tried it with power + Vol. up / down, but the M10 would not start.

Thank you very much.

Daniel

[rrileypm]

Which ROM did you try flashing?

[Speedy@1098]

Which ROM did you try flashing?

http://pan.baidu.com/s/1gpqLC

This one, the Stock 4.2.2
Because with the 4.4.2 I think the M10 has bad WLAN funkction.

Thanks

[rrileypm]

Vido M10 RileyROM 1.0

OK, I have a ROM made for the Vido M10.

I've started a new thread for this ROM:

Download

[Speedy@1098]

OK, I have a ROM made for the Vido M10.

I just need someone to test it to see if it works. If it works, OK...I will start a new thread for this ROM.

This is a KitKat ROM, so you need to keep the loader checked the first time you flash it. If you decide to go back to a Jellybean ROM...you must first erase IDB from this ROM before flashing the Jellybean...and flash the loader for the Jellybean ROM (you are on your own for a Jellybean firmware to flash back to...either look on the Yuandao site, or do a ROM dump of your original firmware before you start, just look around for instructions here on FT).

I'm really needing someone with previous flashing experience to test this ROM. I don't own an M10, but I've made some working ROM's for Vido's other tablets...so theoretically, this one should work fine...but I won't know until someone flashes it to tell me. BEWARE THAT ROM TESTING ISN'T FOR A NOOB. If you aren't experienced, it's better to wait on some positive feedback from someone else, I just don't have time to hold your hand (not to be blunt...but it's the truth).

This ROM is:

Rooted
Debloated
Init.d Support
English Default
Auto APK Install feature on first boot (read my thread on it in the Pipo section)
TWRP Recovery
2, 4, 6, 8, 10, 12gb user app space options by flashing the desired parameter file (default is 4gb)
Boot animation by Tattman65
Reboot app by Petrus
First Time User's Guide for flashing instructions and other tips
Modules added for VPN support (not tested)
Adjusted Wifi Power

If you would like future Vido support, please donate at the link in my signature...I use the funds to buy test devices...which are more expensive than the TV sticks.

Here's a temporary link to the ROM on my Google Drive...I'm having trouble connecting to the Freaktab FTP server:

Download

Hello, I want to test it, but first, are you able to tell me how I'm able to unbrick my M10?
The M10 doesn't strart. Is there apossiblity to get into the flashing Mode?

Thanks fpr Your Help.

Then I will flash your Rom onto my M10.

Best regards
Daniel

[rrileypm]

You need to find the right combination of external keys to manually get into flash mode. On Pipo tablets it is esc and power. You can also try holding volume up and pressing power.

[Speedy@1098]

You need to find the right combination of external keys to manually get into flash mode. On Pipo tablets it is esc and power. You can also try holding volume up and pressing power.

There was no combination to getint fls mode, so I opened the device and have shorten pin 8 and 9 of the nand chip. So I got into Flash mode. I have flashed your Rom.
I think it works fine. The wifi range s a little bit better but is there a possibility
to get it much more better. I tink my Samsung Galaxy S4 has much better wifi.

So far.

[rrileypm]

Some people have modified their antenna to get better reception.

[rrileypm]

That's great news.

I will start a new thread for this ROM...as soon as I can upload it to our FTP server.

[Speedy@1098]

That's great news.

I will start a new thread for this ROM...as soon as I can upload it to our FTP server.

Great.

Is it possible to mount Windows network folders directly in this rom ?

[rrileypm]

You're rooted, so you can tweak away!!!!!

[gio_dim]

I uploaded the firmware update without "erasing nand" and the tablet is stuck at rileyrom screen.
i can boot in cwm recovery but what should i do next?
it needs another firmware package, not the one for the rk tool.
can anyone help?