Tvheadend compiled for amlogic mx/m6 kernel 3.0.8 android

[taki]

must be rooted, copy dvb files to data folder
open terminal write command or add init d later copy system/etc/init.d for auto start

http://www14.zippyshare.com/v/93619738/file.html

compile your usb stic tuner

[clarkss12]

must be rooted, copy dvb files to data folder
open terminal write command or add init d later copy system/etc/init.d for auto start

http://www14.zippyshare.com/v/93619738/file.html

compile your usb stic tuner

Wow, this was what I was hoping for. I have a ATV1220 with a built in atsc tuner, and hope this will work. I tried doing this a couple of weeks ago using the directions for the RK3188, but wiped out my firmware. Could you be a little more specific on the instructions. I used the instructions for the RK3188 and had to copy files do different folders. I am excited about getting this to work on my amlogic box

thanks

[taki]

First root your device. Later copy dvb folder to data folder.
Open terminal for android.
Open readme copy to paste terminal. If it works
Open explorer write url 127.0.0.1:9981
Click adaptor menu
If it find your dvb on board tuner. You can dvb adaptor menu
If you want to auto start tvheadend that you need add to initd
Open play store find univetsal init.d.apk
Setup on your box
Later copy init.d (inside init script sh) system/etc/init.d folder.
Reboot yourbox
Everting ok may be find your tuner. Latet scan channel
)

[clarkss12]

First root your device. Later copy dvb folder to data folder.
Open terminal for android.
Open readme copy to paste terminal. If it works
Open explorer write url 127.0.0.1:9981
Click adaptor menu
If it find your dvb on board tuner. You can dvb adaptor menu
If you want to auto start tvheadend that you need add to initd
Open play store find univetsal init.d.apk
Setup on your box
Later copy init.d (inside init script sh) system/etc/init.d folder.
Reboot yourbox
Everting ok may be find your tuner. Latet scan channel
)

I really appreciate you helping me with this. My device is rooted, and I created folders using your readme file, but I get errors that say failed permission denied.
here is a screen shot of the error message.

copy dvb folder to data
mkdir /sdcard/.hts
mkdir /dev/dvb/adapter0
ln -s /dev/dvb0.frontend0 /dev/dvb/adapter0/frontend0
ln -s /dev/dvb0.demux0 /dev/dvb/adapter0/demux0
ln -s /dev/dvb0.dvr0 /dev/dvb/adapter0/dvr0
ln -s /dev/dvb0.dvr0 /dev/dvb/adapter0/dvr0.ts
mkdir /dev/dvb/adapter1
ln -s /dev/dvb1.frontend0 /dev/dvb/adapter1/frontend0
ln -s /dev/dvb1.demux0 /dev/dvb/adapter1/demux0
ln -s /dev/dvb1.dvr0 /dev/dvb/adapter1/dvr0
ln -s /dev/dvb1.dvr0 /dev/dvb/adapter1/dvr0.ts
chmod 777 /sdcard/.hts
chmod 777 /dev/dvb*
/data/dvb/tvheadend -C -c /sdcard/.hts
open explorer write 127.0.0.1:8891

[clarkss12]

First root your device. Later copy dvb folder to data folder.
Open terminal for android.
Open readme copy to paste terminal. If it works
Open explorer write url 127.0.0.1:9981
Click adaptor menu
If it find your dvb on board tuner. You can dvb adaptor menu
If you want to auto start tvheadend that you need add to initd
Open play store find univetsal init.d.apk
Setup on your box
Later copy init.d (inside init script sh) system/etc/init.d folder.
Reboot yourbox
Everting ok may be find your tuner. Latet scan channel
)

Ok, I copied and pasted the information from your read me file, and here is what the terminal shows. I then typed in 127.0.0.1:9981, but website not found.

thanks again for your help

[taki]

Open android explorer later write url 127.0.0.1:9981. Webinterface must be look. Otherhand tvheadend work with your box. But only found video camera no tuner.

[clarkss12]

Open android explorer later write url 127.0.0.1:9981. Webinterface must be look. Otherhand tvheadend work with your box. But only found video camera no tuner.

When I type 127.0.0.1:9981 in the android explorer, I get "website not found". Also, you said it did not find my built in tuner, that is a bummer.
thanks for your help

[jamdq]

another atv1220 owner

Hi! Do you have any news on this subject?

I followed taki instructions and think that got it to work. I can access web ui on 127.0.0.1:9981. It seems to recognise my tuner but can't scan channels. I get the following error: Mar 29 19:39:26 dvb: "/dev/dvb/adapter0" tuning to "482,000 kHz" -- Front configuration failed -- Bad file number, frequency: 482000000

I have search on tvheadend forums but got nothing. Any ideas?