NEW - MK908 Finless 1.8 ROM

[Finless]

For now, here is a download for the fixed 4gb and 6gb parameter files:

ROM -> Fixed 4gb and 6gb parameter files



Bob

[Finless]

Yes I see I made a math mistake in parameter file.

I will fix it and re-upload!

Bob

[canford]

Could anyone recommend a remote control keyboard (Air fly mouse etc) to use with this rom and a remote control app that will work on a android phone, I have tried RKremote but wont work properly on my phone. Thanks, hope you all remembered Mothers day, lol.

[tlchuan]

Tested with beyond XBMC 3.3 playing Bluray ISO the Hobbit 2, it run smooth without any frame skip

[nntvog]

I have encounter same problem too, the parmeters file of 4gb & 6gb is wrong.... change the system partiton size from 0x120000 to 0x130000 will make it work! for example: 0x00130000@0x00884000(system),-@0x009B4000(user)

Thanks alot. I works a you said.

[tlchuan]

Already solve the problem using ROM_Flash_Tool_137 to flash Finless 1.8 rom, also edit the 4GB parameter with brother mhkao2100 example.

Work great

[ddello]

Now a warning to all going from kitkat back to JB.
DO NOT load up the JB ROM kit and erase NAND. Load up the KitKAt ROM kit, erase NAND, then exit. Now run the JB ROM kit and flash the ROM. This should keep you from hard bricking..

Would this work for downgrading a MK908 v5? Normally I can't seem to be able to erase NAND via flash tools. How should I downgrade my stick, would going into mask mode do the trick?

[mhkao2100]

Bob,I think there there is a problem with the parameter4gb. If I do the maths correctly, the user partition should be 0x009A4000 and not 0x009B4000.

I flashed the parameter4gb and doesnt boot. It show the boot screen with the red "freaktab.com ". There maybe some other problem. I changed to 0x009A4000 and still doenst boot.

I have encounter same problem too, the parmeters file of 4gb & 6gb is wrong.... change the system partiton size from 0x120000 to 0x130000 will make it work! for example: 0x00130000@0x00884000(system),-@0x009B4000(user)

[tlchuan]

Switch MSC Fail ??

[tlchuan]

Dear Bob,

ROM Flash tool_21 only found loader device even i have install the driver

[nntvog]

Bob,I think there there is a problem with the parameter4gb. If I do the maths correctly, the user partition should be 0x009A4000 and not 0x009B4000.

I flashed the parameter4gb and doesnt boot. It show the boot screen with the red "freaktab.com ". There maybe some other problem. I changed to 0x009A4000 and still doenst boot.

[Finless]

Now a warning to all going from kitkat back to JB.
DO NOT load up the JB ROM kit and erase NAND. Load up the KitKAt ROM kit, erase NAND, then exit. Now run the JB ROM kit and flash the ROM. This should keep you from hard bricking..

I never tried that! GOOD TO KNOW!

Thank you!

Bob

[canford]

Just a quick update, tried it in another usb port and no problems now, thought I would pass this along!

[freakkid]

I would repost this but right now I do not have time. Search UNBRICK.

Basically you have to take your device apart.
Find the NAND chip.
Short pins 8&9 on the chip with a pin. count down from the round DOT on the chip.
Plug in the device to USB OTG while shorting the pins.
ROM flash tool should say "MASK ROM"

Bob

Thanx for the reminder Bob...everything is o.k....Antutu score was 18,800 w/stock kernel...Just to add to unbrick post, I shall quote you in one of your thread concerning downgrading from KitKat to Jellybean "...Now a warning to all going from kitkat back to JB.
DO NOT load up the JB ROM kit and erase NAND. Load up the KitKAt ROM kit, erase NAND, then exit. Now run the JB ROM kit and flash the ROM. This should keep you from hard bricking..

[canford]

Thank you appreciate your time, is this the only way you can get this rom on or if someone has image for this rom can you use RKBatch tool.