Neomode Custom Rom MK802IV Old Wifi Version 3.0 Android 4.4.2 FullHD

[dkdkdk]

neomode, what about version for MK802IV with new wifi AP6210? Could you prepare this for us ?

+1

[RidDleZ]

same as MK809III version 3.1

neomode, what about version for MK802IV with new wifi AP6210? Could you prepare this for us ?

Lol? Isn't that exactly what the MK809III version listed below this one would be? Minus saying 'MK802IV' under device info? It is compiled for the AP WiFi.

Here.

Regards,
Jack

[chtheo]

Tested with other kernel?????

Has anyone test it with the old kernels?

http://www.freaktab.com/showthread.php?6208-overclocked-kernel-and-Frame-skipping-fix-for-the-old-MK802-IV-or-UG007B-with-RTL8188-WiFi

Please report if someone do this.

[RidDleZ]

Has anyone test it with the old kernels?

http://www.freaktab.com/showthread.php?6208-overclocked-kernel-and-Frame-skipping-fix-for-the-old-MK802-IV-or-UG007B-with-RTL8188-WiFi

Please report if someone do this.

I do not believe they will work, as they were not compiled for KitKat.

[mechaone]

Re: Neomode Custom Rom MK802IV Old Wifi Version 3.0 Android 4.4.2 FullHD

JellyBean and KitKat kernels are not cross-compatible. Stay with KK kernels for 4.4.2 builds, and only match "beta" kernels with beta KK rom builds.

Sent from my SGH-I337M using Tapatalk

[cylon]

kernel supports?

Hello I have ITaSee IT808 which should be identical to CX-921, wifi should be 8188. I flashed it as I can flash Ugoos UT1 firmwares. But wifi can only work if I change the kernel supporting a RTL 8188. Other than that browsers crash I don't know why

[chtheo]

JellyBean and KitKat kernels are not cross-compatible. Stay with KK kernels for 4.4.2 builds, and only match "beta" kernels with beta KK rom builds.

Sent from my SGH-I337M using Tapatalk

I will try this kernel for rtl8188 : http://www.freak-tab.de/d33/kernel_KK_v4.20_TVSTICK.zip
kernel_KK_v4.20_TVSTICK_RTL8188_HD.img

Anyone who has try it??? The file is bigger than Neomodes.... 8,29 MB -- 10,3 MB

[RidDleZ]

What is the last update on that kernel? A few weeks ago I tried it and had the same freezing problems after a restart. Haven't checked there lately though.

Regards,

[chtheo]

Newer

What is the last update on that kernel? A few weeks ago I tried it and had the same freezing problems after a restart. Haven't checked there lately though.

Regards,

25/5/2014 is the date. I think is newer...Neomodes is 13/4/2014.
I think I will try it

[RidDleZ]

Yes, that is more recent than the version I tried. Please let us know how it works.

[chtheo]

I doesn't work! I have just bricked my 802IV

Yes, that is more recent than the version I tried. Please let us know how it works.

I doesn't boot at all and my MK802IV probably is DEAD. I tried to reinstall the 1.5 version of Neomodes but the switch on the board it doesn't work. I took it off theboard , I made a shortcircuit but NOTHING. I used a niddle to shortcircuit the 7 and 8 pin of NAND , IT WORKED BUT THERE IS ALWAYS AN ERROR TRYING TO ERASE IDB OR FLASH. The device is working in MUSK MODE when using the niddle.
I tried also and original Rikomagic software but when trying to flash there is an error.

ANY IDEAS???? OR move it to the recycle bin

[RidDleZ]

No no, I'm sure it is not dead. I know one of the older flashers (pre 1.5) had the 'switch' button to change flash mode in the utility. Perhaps give that a try?

Regards,

[chtheo]

Failure....

No no, I'm sure it is not dead. I know one of the older flashers (pre 1.5) had the 'switch' button to change flash mode in the utility. Perhaps give that a try? Regards,

I have tried several versions of flashers and Android tools 2.1 . None of them can erase IDB ,switch or flash in maskrom. May I have to find another way to activate the stick on PC . Now I use a niddle and make a short circuit between 7 and 8pins of nand. Do you have any specific program to try?

[RidDleZ]

Did you just overwrite the kernel when you flashed, or did you do a complete reflash of the device? Flashing just the kernel could not kill a stick like this. What bootloader version did you flash?

My process for flashing is as follows:
-disconnect all power and usb from all ports (OTG and power port)
-plug USB into otg port but not computer
-push button in (in your case short)
-plug USB into computer (while shorting) (computer will provide power through OTG port)
-keep shorting for a few seconds
-remove short
-device should show up in flash utility (and be flashable).

I had the problem you're having now a long time ago (when flashing neo 1.5)

No worries, it'll come back.

Regards,

[chtheo]

Did you just overwrite the kernel when you flashed, or did you do a complete reflash of the device? Flashing just the kernel could not kill a stick like this. What bootloader version did you flash?

My process for flashing is as follows:
-disconnect all power and usb from all ports (OTG and power port)
-plug USB into otg port but not computer
-push button in (in your case short)
-plug USB into computer (while shorting) (computer will provide power through OTG port)
-keep shorting for a few seconds
-remove short
-device should show up in flash utility (and be flashable).

I had the problem you're having now a long time ago (when flashing neo 1.5)

No worries, it'll come back.

Regards,

unfortunately I did all theese steps at the first phase.
I made a shortcircuit even with soldel gun!!!!!!!! nothing
My only solution is short circuit pin 7 and 8 on NAND chip but it seems NAND chip has problem, when trying to EraseIdb the error is ERROR: Download boot failed....
I will keep try for a while....


NO MORE RK CHIPSET FOR ME AGAIN.....