Pipo M9 bricked, Help please

[mutenrroi]

Hi, I had have a problem flashing the rom with the BatchTool in my PIPO Max M9(non PRO), I think i used a ROM for PRO tablets and in the end of flashing process give me an error and the tablet didnt restart . Now I am triying do the unbricked with rileyrom flashing instructions but I can´t.
The flash tool indentified the tablet but my PC discconect the tablet every minute, for one second. then when I am trying to erase nand with the flash tool, doing the low format, when the count reach around 15000 of total of 16386, the USB is disconeccted. Even with not flashing software just with the tabled plugged, windows every minute disconect the tablet one second and inmediately indentifying it again.
If I try with the batchtool 1.7, occurs the same during the testing device procees.
I am using the dirvers 3.5 and I have tried with 3 computers and diferents USB cables but not way.
Sorry for my english.
Any Idea?

[Edius]

Before put your M9 in mask mode, try to connect wallcharger.
That solved same problem for me, but with M9 Pro version.
Try also to keep power button pressed in this time.

[mutenrroi]

Before put your M9 in mask mode, try to connect wallcharger.
That solved same problem for me, but with M9 Pro version.
Try also to keep power button pressed in this time.

Thank Edius.

I have tried it already but it doesn´t work. Well I guess i am in mask mode becouse the flash utilities detect the device but i can not see nothing in the tablet, but even i unplug the tablet it continue in this mode. How I can out from mask mode and try plug the charger before enter again?

Thank you.

[mutenrroi]

Here you can help a capture with the problem, I dont know what I can do...

[Edius]

I'm afraid you must open back cover and short nand chip (pin 7+8 or 8+9 is most usual combinations..tablet must be powered on, RKAndroidTool opened and plugged with original Pipo USB cable.
Read this sticky thread http://www.freaktab.com/showthread.p...G-A-KITKAT-ROM!!!!! .. post no. 2 is a "must read"
Connect your tablet to the PC, USB 2.0 port must be used, USB 3.0 is not compatible.
When will be in correct Mask mode you'll see in RKAndroidTool lower part something related to this.
With power button pressed try erasing IDB and flash ROM with Loader checked.

[mutenrroi]

I'm afraid you must open back cover and short nand chip (pin 7+8 or 8+9 is most usual combinations..tablet must be powered on, RKAndroidTool opened and plugged with original Pipo USB cable.
Read this sticky thread http://www.freaktab.com/showthread.p...G-A-KITKAT-ROM!!!!! .. post no. 2 is a "must read"
Connect your tablet to the PC, USB 2.0 port must be used, USB 3.0 is not compatible.
When will be in correct Mask mode you'll see in RKAndroidTool lower part something related to this.
With power button pressed try erasing IDB and flash ROM with Loader checked.

Ok, Thank you Edius, I will try short the pins

[mutenrroi]

It doesnt work.... I shorted the two pins and the flash tool recon again the tablet but in the same mode. The original error was with the Rockchip batch tool so I dont think my problem was not mark the loader button.

I want ask...in the Batch tool, the numbers under the box means something, becouse watching some videos of people shorting the pins, i could see i have a diferent code there. My code is 2-1-2.



And in this video i can see the original code is 1-1-3

https://www.youtube.com/watch?v=pHlC0cxm6wg

This is the log of the original first flash (sorry for the legth)
:57:46 269 **********Restore Start Total<1>**********
16:57:46 274 <Layer 2-1-2> Test Device Start
16:57:46 314 <Layer 2-1-2> Test Device Success
16:57:46 316 <Layer 2-1-2> Lowerformat Device Start
16:59:20 368 <Layer 2-1-2> Lowerformat Device Success
16:59:20 372 <Layer 2-1-2> Test Device Start
16:59:20 384 <Layer 2-1-2> Test Device Success
16:59:20 387 <Layer 2-1-2> Check Chip Start
16:59:20 392 <Layer 2-1-2> Check Chip Success
16:59:20 397 <Layer 2-1-2> Get FlashInfo Start
16:59:20 400 <LAYER 2-1-2> INFO:FlashInfo: 0 0 80 0 0 4 8 18 28 4 F
16:59:20 404 <Layer 2-1-2> Get FlashInfo Success
16:59:20 412 <Layer 2-1-2> Prepare IDB Start
16:59:20 413 <LAYER 2-1-2> INFO:CS(1) (4096MB) (MICRON)
16:59:20 414 <LAYER 2-1-2> INFO:CS(2) (4096MB) (MICRON)
16:59:20 414 <LAYER 2-1-2> INFO:CS(3) (4096MB) (MICRON)
16:59:20 415 <LAYER 2-1-2> INFO:CS(4) (4096MB) (MICRON)
16:59:20 423 <Layer 2-1-2> Prepare IDB Success
16:59:20 426 <Layer 2-1-2> Download IDB Start
16:59:21 050 <Layer 2-1-2> Download IDB Success
16:59:21 056 <Layer 2-1-2> Reset Device Start
16:59:22 060 <Layer 2-1-2> Reset Device Success
16:59:22 061 <Layer 2-1-2> Wait For Loader Start
16:59:23 458 <Layer 2-1-2> Wait For Loader Success
16:59:23 460 <Layer 2-1-2> Test Device Start
17:02:28 655 <Layer 2-1-2> Test Device Success
17:02:28 663 <Layer 2-1-2> Download Firmware Start
17:03:30 278 <LAYER 2-1-2> ERROR:RKA_File_Check-->Memcmp failed,Read(1048576)
17:03:30 287 <LAYER 2-1-2> ERRORownloadImage-->RKA_File_Check failed(kernel)
17:03:30 294 <Layer 2-1-2> Download Firmware Fail
17:03:30 299 **********Restore Done Success<0> Fail<1> Time<344029>ms**********
17:04:25 942 Rockchip Batch Tool v1.7.1.1 start run
17:06:10 432 **********Upgrade Start Total<1>**********
17:06:10 442 <Layer 2-1-2> Test Device Start
17:06:10 442 <Layer 2-1-2> Test Device Success
17:06:10 452 <Layer 2-1-2> Check Chip Start
17:06:10 452 <Layer 2-1-2> Check Chip Success
17:06:10 452 <Layer 2-1-2> Get FlashInfo Start
17:06:10 462 <LAYER 2-1-2> INFO:FlashInfo: 0 0 80 0 0 8 8 18 20 7 F
17:06:10 462 <Layer 2-1-2> Get FlashInfo Success
17:06:10 462 <Layer 2-1-2> Prepare IDB Start
17:06:10 462 <LAYER 2-1-2> INFO:CS(1) (4096MB) (INTEL)
17:06:10 462 <LAYER 2-1-2> INFO:CS(2) (4096MB) (INTEL)
17:06:10 462 <LAYER 2-1-2> INFO:CS(3) (4096MB) (INTEL)
17:06:10 462 <LAYER 2-1-2> INFO:CS(4) (4096MB) (INTEL)
17:06:10 492 <Layer 2-1-2> Prepare IDB Success
17:06:10 492 <Layer 2-1-2> Download IDB Start
17:06:11 112 <Layer 2-1-2> Download IDB Success
17:06:11 442 <Layer 2-1-2> Reset Device Start
17:06:12 442 <Layer 2-1-2> Reset Device Success
17:06:12 442 <Layer 2-1-2> Wait For Loader Start
17:06:13 612 <Layer 2-1-2> Wait For Loader Success
17:06:13 612 <Layer 2-1-2> Test Device Start
17:06:13 612 <Layer 2-1-2> Test Device Success
17:06:13 612 <Layer 2-1-2> Download Firmware Start
17:07:18 262 <LAYER 2-1-2> ERROR:RKA_File_Check-->Memcmp failed,Read(1048576)
17:07:18 272 <LAYER 2-1-2> ERRORownloadImage-->RKA_File_Check failed(kernel)
17:07:18 282 <Layer 2-1-2> Download Firmware Fail
17:07:18 292 **********Upgrade Done Success<0> Fail<1> Time<67845>ms**********
17:08:58 452 **********Restore Start Total<1>**********
17:08:58 459 <Layer 2-1-2> Test Device Start
17:08:58 461 <Layer 2-1-2> Test Device Success
17:08:58 463 <Layer 2-1-2> Lowerformat Device Start
17:09:17 483 <Layer 2-1-2> Lowerformat Device Success
17:09:17 487 <Layer 2-1-2> Test Device Start
17:09:17 496 <Layer 2-1-2> Test Device Success
17:09:17 500 <Layer 2-1-2> Check Chip Start
17:09:17 504 <Layer 2-1-2> Check Chip Success
17:09:17 507 <Layer 2-1-2> Get FlashInfo Start
17:09:17 511 <LAYER 2-1-2> INFO:FlashInfo: 0 0 80 0 0 8 8 18 20 7 F
17:09:17 513 <Layer 2-1-2> Get FlashInfo Success
17:09:17 842 <Layer 2-1-2> Prepare IDB Start
17:09:17 844 <LAYER 2-1-2> INFO:CS(1) (4096MB) (INTEL)
17:09:17 846 <LAYER 2-1-2> INFO:CS(2) (4096MB) (INTEL)
17:09:17 847 <LAYER 2-1-2> INFO:CS(3) (4096MB) (INTEL)
17:09:17 848 <LAYER 2-1-2> INFO:CS(4) (4096MB) (INTEL)
17:09:17 863 <Layer 2-1-2> Prepare IDB Success
17:09:17 868 <Layer 2-1-2> Download IDB Start
17:09:18 468 <Layer 2-1-2> Download IDB Success
17:09:18 475 <Layer 2-1-2> Reset Device Start
17:09:19 482 <Layer 2-1-2> Reset Device Success
17:09:19 483 <Layer 2-1-2> Wait For Loader Start
17:09:20 454 <Layer 2-1-2> Wait For Loader Success
17:09:20 456 <Layer 2-1-2> Test Device Start
17:09:39 470 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:09:39 471 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:09:59 481 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:09:59 484 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:10:19 498 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:10:19 499 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:10:39 512 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:10:39 512 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:10:59 531 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:10:59 531 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:11:19 545 Error:RKU_Write-->WriteFile failed,bRet=0,err=2,size=31,write=0
17:11:19 746 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:11:19 746 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-3),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:11:39 762 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:11:39 764 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:12:20 803 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:12:20 803 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:12:40 823 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:12:40 823 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:13:00 842 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:13:00 842 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:13:20 859 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:13:20 860 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:13:40 881 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:13:40 883 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:14:00 903 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:14:00 904 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:14:20 920 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:14:20 921 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:14:40 949 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:14:40 950 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:14:41 952 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:14:41 952 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:14:42 953 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:14:42 955 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:14:43 960 <Layer 2-1-2> Test Device Fail
17:14:43 966 **********Restore Done Success<0> Fail<1> Time<345511>ms**********
17:15:06 987 Rockchip Batch Tool v1.7.1.1 start run
17:15:35 937 **********Upgrade Start Total<1>**********
17:15:35 947 <Layer 2-1-2> Test Device Start
17:15:46 987 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:15:46 987 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:16:06 987 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:16:06 987 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:16:26 987 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:16:26 987 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:16:47 003 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:16:47 004 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:17:07 022 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:17:07 023 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:17:27 039 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:17:27 040 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:17:47 060 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:17:47 061 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:18:07 083 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:18:07 085 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:18:27 109 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:18:27 109 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:18:47 125 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:18:47 126 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:19:07 146 Error:RKU_Write-->WriteFile failed,bRet=0,err=2,size=31,write=0
17:19:07 347 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:19:07 347 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-3),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:19:27 366 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:19:27 368 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:19:47 385 Error:RKU_Write-->WriteFile failed,bRet=0,err=2,size=31,write=0
17:19:47 586 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:19:47 586 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-3),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:20:07 602 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:20:07 602 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:20:27 619 Error:RKU_Write-->WriteFile failed,bRet=0,err=2,size=31,write=0
17:20:27 820 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:20:27 821 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-3),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:20:47 841 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:20:47 842 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:20:48 844 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:20:48 844 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:20:49 845 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_310B#6&8057 EBE&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:20:49 846 <LAYER 2-1-2> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_310B#6&8057EBE&0&2#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
17:20:50 850 <Layer 2-1-2> Test Device Fail

Thank you so much.

[Edius]

You said that the problem started when you put a wrong M9 Pro firmware , and you had an error at the end. You flashed in system a M9 Pro loader(wrong one) that will never work with an m9 (non pro).
Try to erase IDB with RKAndroid Tool.
RKAndroid Tool will display at the bottom when in mask mode.
Do not know the exact text displayed, but if you not use the correct pair of pins will not be in mask mode..it will keep Loader Mode (Which is not good for what you want to do).
When will be in mask mode, you can erase IDB without any problem.
Now, in Loader Mode, M9 Pro loader (wrong one) gives inaccurate information to RockchipBatch Tool, trying to erase nand memory that differs from what you have on the M9 (non pro).
Once you manage to erase IDB without errors in RKAndroidTool's log, use Rockchip Batch Tool to flash ROM properly.

[mutenrroi]

I could solve it!! Thank you so much Edius....finally i could put the tablet in mask mode shorting the pins, I had to use a copper wire to do this but it is working now. I am happy!!

Now I have Android 4.2.2, but I would like the 4.4. have some rom for olds pipo M9 non pro?

thank you!

[min0taur]

I could solve it!! Thank you so much Edius....finally i could put the tablet in mask mode shorting the pins, I had to use a copper wire to do this but it is working now. I am happy!!

Now I have Android 4.2.2, but I would like the 4.4. have some rom for olds pipo M9 non pro?

thank you!

You can try http://vitha.forumotion.com/t177-pip...-kat-44-stable

[Edius]

I am happy!!

Now I have Android 4.2.2, but I would like the 4.4. have some rom for olds pipo M9 non pro?

thank you!

And i am happy for your success.
Regarding 4.4 for M9, you can ask Randy, I was not interested in this model so far.
To my knowledge, the only existing version for M9 is not based on a original Pipo relese.
Regards.