Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

CS918 how to flash

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
    #1

    CS918 how to flash

    Just received the cs918, cannot flash it, please see attached pic of the vendor software as well as model #.
    Tried to flash it on my computer by holding the recovery button while powering, but will not work,even though was able to find and open it as a separate drive that is why I don't think I have a driver identification problem. Any idea of how to remove the cover without damaging the plastic?
    Please help.
    Attached Files
    Tags: None
    #2
    Forums - FreakTab
    http://www.freaktab.com/showthread.php?8647-UPDATE-K-R42-wasser-firmware-Kikat-Android-4-4-2&p=193167&viewfull=1#post193167
    vBulletin Forums


    Forums - FreakTab
    http://www.freaktab.com/showthread.php?8647-UPDATE-K-R42-wasser-firmware-Kikat-Android-4-4-2&p=193252&viewfull=1#post193252
    vBulletin Forums

    (Reset under the device)

    Forums - FreakTab
    http://www.freaktab.com/showthread.php?14275-ADB-not-listing-my-K-R42&p=193244&viewfull=1#post193244
    vBulletin Forums
    RK3288 Devices
    - Overview BOX (LINK !)
    - Overview STICK (Dongle) (LINK !)

    MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
    UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
    Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
    Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

    RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
    Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

    Comment

      #3
      Thanks for your reply, but I still cannot get my CS918 in the flash mode. When I hold the recovery button, nothing happens but as soon as I release that button than it goes into the drive mode and ask to open the folders, also it shows in device manager under Portable devices(RK31SDK). Could it be that my box is defective and wont go into flash mode?
      Attached Files
      Last edited by minonano; 17 June 2014, 01:38.

      Comment

        #4
        Your first problem, I don't know what's wrong, the device or your environment, because you can also press and release the reset during normal running and it will be immediately at boot loader mode ('Class for rockusb device' at device manger) and hold this state till you power off the device...

        Your picture isn't helpful, because no label information at the pcb and no information about wifi chip next to the antenna cable connector (of cause at the pcb)...
        RK3288 Devices
        - Overview BOX (LINK !)
        - Overview STICK (Dongle) (LINK !)

        MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
        UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
        Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
        Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

        RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
        Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

        Comment

          #5
          Originally posted by no_spam_for_me View Post
          Your first problem, I don't know what's wrong, the device or your environment, because you can also press and release the reset during normal running and it will be immediately at boot loader mode ('Class for rockusb device' at device manger) and hold this state till you power off the device...

          Your picture isn't helpful, because no label information at the pcb and no information about wifi chip next to the antenna cable connector (of cause at the pcb)...
          Thanks for your help, but first I think my reset button is not working when pressed and released nothing happens.
          As for the PCB info, please see the attached, but no info showing on the wifi chip next to the antenna connector.
          Thanks ad appreciate the help
          Attached Files

          Comment

            #6
            I don't know, what's wrong with the reset...

            XT-Q7-V10 2013-12-05
            Of cause there is something printed at the chip at the blue "pcb"...
            Have a look at these threads
            Forums - FreakTab
            http://www.freaktab.com/showthread.php?11825-Need-help-identifying-and-want-1080P-firmware
            vBulletin Forums

            Forums - FreakTab
            http://www.freaktab.com/showthread.php?12566-Q7-Firmware-by-lewy20041
            vBulletin Forums

            Forums - FreakTab
            http://www.freaktab.com/showthread.php?9963-Q7-Rk3188-Device-What-Works-amp-Help-Please
            vBulletin Forums
            RK3288 Devices
            - Overview BOX (LINK !)
            - Overview STICK (Dongle) (LINK !)

            MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
            UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
            Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
            Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

            RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
            Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

            Comment

              #7
              Ok here are my specs, similar to the other post
              XT-Q7-V10, 2013-12-05
              WIFI; RTL8188EUS
              BT; Mediatek MT6622N

              So now, thanks to your help, I can find the FW, but still have the reset button not working!
              I have just received this unit, I guess I can file a complain that the recovery button is not flashing mode!
              Anyone else had similar reset problem?

              Comment

                #8
                no_spam_for_me, could my problem be that I also own a Minix X7 and I installed the Neo Driver install o my computer?
                Do both X7 and Q7 use the same drivers?

                Comment

                  #9
                  I don't think so that this will be a problem...
                  but if ADB works, you also able to go to bootloader using adb:

                  adb reboot bootloader
                  RK3288 Devices
                  - Overview BOX (LINK !)
                  - Overview STICK (Dongle) (LINK !)

                  MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
                  UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
                  Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
                  Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

                  RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
                  Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

                  Comment

                    #10
                    Any other method of flashing without the recovery button? Maybe through settings, etc,..

                    Comment

                      #11
                      1. Setup android
                      I've these settings in android
                      Settings -> [DEVICE] USB -> Enable Connect to PC
                      Settings -> [PERSONAL] Security -> Enable Unknown Sources
                      Settings -> [SYSTEM] Developer options -> Enable USB debugging
                      1a. Unplug power

                      2. Install USB-Driver via Moborobo
                      NameBright - Coming Soon
                      http://www.moborobo.com/

                      2a. Connect device via micro-USB-cable at OTG-Port at the device with your PC
                      2b. Plug power to your device (starts up automatically)
                      (2c. uninstall Moborobo)
                      (if there are any problems try other way to install USB-Driver http://www.freaktab.com/showthread.p...l=1#post106326)

                      3. Download ADB
                      http://www.freak-tab.de/neomode/adb.zip
                      RK3288 Devices
                      - Overview BOX (LINK !)
                      - Overview STICK (Dongle) (LINK !)

                      MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
                      UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
                      Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
                      Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

                      RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
                      Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

                      Comment

                        #12
                        Thanks, tried it (Moborobo) with no luck, but finally I got it in flash mode!
                        It was the button sensitivity tried few times, eventually worked
                        Thanks a lot.
                        Last edited by minonano; 19 June 2014, 14:04.

                        Comment

                          #13
                          CS918 how to flash

                          hello all i wud like to know how to get the driver file and rockchip batch tool
                          i have CS918 and the borad is ( XT-Q7-V11 2014-07-14 ) thank you

                          Comment

                            #14
                            I never tried to connect my rk3188 since I use this drivers and tools
                            Forums - FreakTab
                            http://www.freaktab.com/showthread.php?16490-Beelink-R89-UBOX-ROM-Tools-release&p=219459&viewfull=1#post219459
                            vBulletin Forums

                            but it should also work with the rk3188 devices...
                            (because of the driver maybe also have a look at http://www.freaktab.com/showthread.p...-box-read-this!!!! )
                            RK3288 Devices
                            - Overview BOX (LINK !)
                            - Overview STICK (Dongle) (LINK !)

                            MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
                            UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
                            Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
                            Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

                            RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
                            Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

                            Comment

                              #15
                              hi to all,
                              I flashed the new firmware and everything went ok,but its not booting up.its shows only red color in on/off button.How can I fix it?

                              Comment

                              Previous 1 2 template Next

                              What's Going On

                              Collapse

                              There are currently 2503 users online. 0 members and 2503 guests.

                              Most users ever online was 63,956 at 18:56 on 20 March 2025.

                              Working...
                              X

                              We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

                              By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

                              I Agree