Netxeon Box V2.. Or yet another **** clone. Need firmware...Info inside.

[Greylopht]

First off, let me say thank you all. So far I have tried many roms by Finless and a few others and things have worked quite nice on my other stick. But being the bottom feeder I am, I can never resist the lure of new cheap hardware. If you want a review of this thing well here it is...

Out of the box it ate it's self on the first reboot. I barely got tools installed and did not even get vital info before it grenade'd. It seemed sprightly enough however. Details.

Rockchip RK 3188-t quad supposedly 1.6.
2 Gigs of Ram.
RTL8723bs for the Wifi.

Board identification...

Netxeon Box_V2.0_20140325

Chip layout is identical to the images in this thread http://www.freaktab.com/showthread.p...l=1#post182528 The packaging on this one is just like a CX-919 single antenna.

So far, I have flashed to many things to list, so some help would be appreciated.

Thank you again.


--------------------------------------Update

7/25 Ok ap6210_kitkat_finless20_beta2 is great and stable on the processor side. Of course no wifi and no BT, but it is snappy and stable. It runs at 1.0 ghz so therefore it runs cool. (Yeah this whole second market for 3188's that are slightly rubish, slapping a T on there and selling them again, makes one really watch what they are doing.) I have my full 2 gigs of memory on tap and my large USB and my OTG ports work. 720 with no flicker and that is on the supplied stock kernel.

update_8723 xbmc boot2.09_2014.4.22 give me wifi and BT that work just fine. But that is where the good news stops, everything else is absolute rubbish. Besides the over voltage to the processor causing MASSIVE instability, no large USB support and the screen twitch on 720... well she is no good.

Can anyone roll the wifi out of one and into another, from the lower to Finless's Beta?

[arknos21]

CX-919 With RK3188T + WIFI RTL8723BS

I have the same problems and this is my CX-919 android TV
the problem is that you have a CX-919 With RK3188T + WIFI RTL8723BS and you can check opening.
the rom works best is this https://docs.google.com/file/d... and I still have flickering screen problem (much less than others)
PCB Netxeon BOX_V2.0_20140325

[Greylopht]

I have the same problems and this is my CX-919 android TV
the problem is that you have a CX-919 With RK3188T + WIFI RTL8723BS and you can check opening.
the rom works best is this https://docs.google.com/file/d... and I still have flickering screen problem (much less than others)
PCB Netxeon BOX_V2.0_20140325

That is her, but the rom has issues.

Besides the large USB not working, and the fact that it has a problem just running CPU identifier...

And anything else but settings.

WIFI and BT work. Bout it, can hardly install anything because outside the base OS and Settings everything comes to a halt. I think there are CPU clock issues... The other rom as above as far as being stable is, and it has my large USB support.

Issue run down of update_8723 xbmc boot2.09_2014.4.22.img

Large USB port does not power up.
Application stutter and lock. Both CPU identifier and as well playing simple Video files. MX player works better, when it works.
All communications happen over OTC port for USB.
Green twitch lines even at 720p... I have seen less video shudder too in other ones I have tried.
With large USB port dead, and massive Video issues..
Not a rom that is real world liveable.


So we need a driver roll here.

If everyone tells me they want me to.. I will report on 10 supposed builds for it. I have 10 sitting here an have flashed 10..