TWRP for Amlogic devices.

[jrpinda20]

Are any of the above compatible with the Mecool BB2 Pro 3G DDR4 device if so which if not could you compile one for it as well

Thanks in advance

Moornin,
Do you find this file?

i´m looking for too.
tkx

[Lysifer]

Hello, tell me please, is there already twrp for t962x2, mi tv 5 pro?

[ClarkKent]

the answer is just 2 posts away. ..(#1631)

great. which one? gt1 mini 2...q201?
twrp.q201_N-3.2.1-0.img
twrp.q20x-3.2.1-0.img
twrp.p21x-3.2.1-0.img

[mojojojo67]

Guest post 1621? Do you think 905x2 twrp will run on x3 soc? Or is there a solution your suggesting ?

the answer is just 2 posts away. ..(#1631)

[ClarkKent]

Guest post 1621? Do you think 905x2 twrp will run on x3 soc? Or is there a solution your suggesting ?

[claude97419]

Okay, I generated a few builds of TWRP 3.2.1-0 just to see if I could get it working, and I'm happy to report success:[LIST][*]twrp.q201_N-3.2.1-0.img[*]twrp.q20x-3.2.1-0.img[*]twrp.p21x-3.2.1-0.img


..............

Hi Magendanz,
I new on freaktab forum and i saw your post.
May be you can give me an help.
I have a Beelink GT1 Ultimate (q201) Android TV, Amlogic S912 , factory pre-rooted and OTA update to Nougat 7.1
I'm just looking a way to install "magisk", but first i have to put a TWRP.
Do you think your above "twrp.q201_N-3.2.1-0.img" is good according to my Beelink model
If yes, what installation tips can you give me for a safe TWRP installation, bcse i read a lot of thinks about bricked TV Box
Thanks in advance
Regards

[LITUATUI]

This TWRP for S905X2 also works for S905X3.

1. Put the attachment file in SDCard/USB Drive
2. Plug in the USB
3. Plug in the power while holding the reset button (found inside the AV Ports usually)
4. After you get into recovery, use remote to select Apply Update from SDCard
5. Select the TWRP_322.zip
6. You're now in TWRP.

https://www.sendspace.com/file/7voe9m

I asked Magendanz about GTMini2’s TWRP and got no response so either he might of had trouble making TWRP for it or he’s really busy now. Hope he makes something for us.

Sorry, but I just don't have GT1 MINI-2 hardware, so I can't really build TWRP or custom ROMs for that device. (In fact, I don't have any S905x3 devices.) I have posted the device tree for the S905X2 reference board, though, and in theory they should be very similar.

[NathanC]

I asked Magendanz about GTMini2’s TWRP and got no response so either he might of had trouble making TWRP for it or he’s really busy now. Hope he makes something for us.

https://forum.freaktab.com/forum/tv-player-support/amlogic-based-tv-players/16228-twrp-for-amlogic-devices?p=790762#post790762

[exotic34]

Hello Guest I have Mecool KM3 device..I want to install TWRP and MAGISK ... What should I do if you help ...Thank you..

Edit: I found this .. ( http://androidbiits.com/root-mecool-...2-u212-easily/ ) Does the description here apply to KM3 ?
Will my certificates be deleted if I do this?

[querol]

Can anyone compile TWRP for the Pandora Games 3D (s812 on MBX n200)?

Original recovery: https://www.dropbox.com/s/8xs6wfjomt...overy.img?dl=0
Boot: https://www.dropbox.com/s/dh9a6mtu4b33opy/boot.img?dl=0

# cat /proc/partitions
major minor #blocks name

31 0 1024 mtdblock0
31 1 64 mtdblock1
179 0 124868608 mmcblk0
179 1 124868560 mmcblk0p1
250 0 262144 cache
250 1 32768 logo
250 2 32768 recovery
250 3 32768 misc
250 4 32768 boot
250 5 786432 system
250 6 655360 data

# cat /proc/mtd
dev: size erasesize name
mtd0: 00100000 00001000 "bootloader"
mtd1: 00010000 00001000 "ubootenv"

# cat /proc/ntd
dev: block_num blocksize name
ntd0: 12400000 00200000 "nfcache"
ntd1: 3e400000 00200000 "nfcode"
ntd2: 2c800000 00200000 "nfdata"

/sbin/busybox ls -l -R /dev/block
/dev/block:
total 0
__bionic_open_tzdata: couldn't find any tzdata when looking for Asia/Shanghai!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
brw------- 1 root root 250, 4 Jan 1 00:00 boot
brw------- 1 root root 250, 0 Jan 1 00:00 cache
brw------- 1 root root 250, 6 Jan 1 00:00 data
brw------- 1 root root 250, 1 Jan 1 00:00 logo
brw------- 1 root root 7, 0 Jan 1 00:00 loop0
brw------- 1 root root 7, 1 Jan 1 00:00 loop1
brw------- 1 root root 7, 2 Jan 1 00:00 loop2
brw------- 1 root root 7, 3 Jan 1 00:00 loop3
brw------- 1 root root 7, 4 Jan 1 00:00 loop4
brw------- 1 root root 7, 5 Jan 1 00:00 loop5
brw------- 1 root root 7, 6 Jan 1 00:00 loop6
brw------- 1 root root 7, 7 Jan 1 00:00 loop7
brw------- 1 root root 250, 3 Jan 1 00:00 misc
brw------- 1 root root 179, 0 Jan 1 00:00 mmcblk0
brw------- 1 root root 179, 1 Jan 1 00:00 mmcblk0p1
brw------- 1 root root 31, 0 Jan 1 00:00 mtdblock0
brw------- 1 root root 31, 1 Jan 1 00:00 mtdblock1
drwxr-xr-x 3 root root 3160254124654608 Jan 1 00:00 platform
brw------- 1 root root 250, 2 Jan 1 00:00 recovery
brw------- 1 root root 250, 5 Jan 1 00:00 system
brw------- 1 root root 253, 0 Jan 1 00:00 zram0

/dev/block/platform:
total 0
drwxr-xr-x 3 root root 3160254124654608 Jan 1 00:00 aml_sdio.0

/dev/block/platform/aml_sdio.0:
total 0
drwxr-xr-x 2 root root 3160254124654608 Jan 1 00:00 by-num
lrwxrwxrwx 1 root root 3160254124654608 Jan 1 00:00 mmcblk0 -> /dev/block/mmcblk0
lrwxrwxrwx 1 root root 3160254124654608 Jan 1 00:00 mmcblk0p1 -> /dev/block/mmcblk0p1

/dev/block/platform/aml_sdio.0/by-num:
total 0
lrwxrwxrwx 1 root root 3160254124654608 Jan 1 00:00 p1 -> /dev/block/mmcblk0p1


Thanks

[NathanC]

I'm having some trouble downloading the latest GT1 Mini 2 firmware now, but if the site comes back up I should be able to build this tomorrow.

Guest Hi, have you had any progress on a TWRP image for the GT1 Mini 2 yet? I would really love to try it out on my new box. If you have please share a link. I love your work!!

Nate

[LITUATUI]

Any luck getting TWRP on S905X3 devices?

[RISCy Dude]

I had the image on a USB stick. Directed the app to it.
You may want to make sure you can restore your box if something goes wrong, for instance how to MASKROM mode. I am somewhat fearless with the VIM3, as it is seems like a tough one to break.
I don't use TWRP, I was just seeing if the image worked.

[ClarkKent]

ClarkKent I tried this on the Khadas VIM3(A311D). I installed this image using the Team Win TWRP app. I am not fluent on TWRP, but seems to be working.

what process?
moved to external storage, and then just used the app?
... what did you put on the device selection?
For me, the app won't See the zip.
I guess this means the twrp app Will see an img file?
yet, I thought stock ugoos recovery would Not flash an img. file
Is that basically the sop at work here?

I take it, Guest also suggests terminal install command, i wonder if a script change to match the language in a recent ugoos updater could help with anyway tried?
thiughts?