Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

kernel overclocking

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    kernel overclocking

    hello

    i have the cs968 device, rk3188(not T version)

    installed custom rom(smic v2.0) which is compatible with device(tried messaging the author a few times but no response)

    thing is-any oc kernel i flash, cpu governor shows the stock cpu

    cant get oc kernel to take,

    can anyone please advise me on how to do so? has anyone had this before?

    is there a guide somewhere?step by step? signed kernels kernel in recovery.img tips etc......loads of information but nothing to fix this so far

    please help

    #2
    open kitkat rom

    [/QUOTE]

    is there an open kitkat rom thats suitable for flashing oc kernels on it?

    any kernel not rom singed

    can someone please guide me on how to flash an overclocked kernel? in rkandroidtool, which partitions and what not to install or nstall?

    Comment


      #3
      First you have to know, which PCB you have... (four screws under the rubber feet)
      => http://www.freaktab.com/showthread.p...s918-and-T-r42
      RK3288 Devices
      - Overview BOX (LINK !)
      - Overview STICK (Dongle) (LINK !)

      MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
      UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
      Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
      Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

      RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
      Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

      Comment


        #4
        pcb

        Originally posted by no_spam_for_me View Post
        First you have to know, which PCB you have... (four screws under the rubber feet)
        => http://www.freaktab.com/showthread.p...s918-and-T-r42
        hey mate

        i have the cs968, and in the post i didnt see(maybe i missed it) cs968 version

        on the chip it says 3135 how do i know which firmware goes with it? and which custom rom and overclock values are for it?



        just follow the roms in the page? or are there any specifics i have to check for?
        Last edited by veganboy; 18 August 2014, 16:09.

        Comment


          #5
          which chip says 3135?
          WHAT is printed at the PCB (motherboard)?
          RK3288 Devices
          - Overview BOX (LINK !)
          - Overview STICK (Dongle) (LINK !)

          MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
          UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
          Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
          Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

          RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
          Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

          Comment


            #6
            Originally posted by no_spam_for_me View Post
            which chip says 3135?
            WHAT is printed at the PCB (motherboard)?
            ok i think i am misreading you

            in the link you posted the picture shows a chip and the version no that someone wrote about

            mine on the same chip says 3135 and the wifi is ap6210

            if not this, where is the version writte, is there a picture circled or something?(didnt see any writing on the board itself only on the chips)

            isnt the board version different for each device? if so i didnt see any reference to cs968

            Comment


              #7
              I don't believe you had a look at the thread I had posted, because there are so many PCB pictures and PCB label information that you wouldn't ask this question if you have a look at this thread...
              RK3288 Devices
              - Overview BOX (LINK !)
              - Overview STICK (Dongle) (LINK !)

              MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
              UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
              Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
              Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

              RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
              Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

              Comment


                #8
                Originally posted by no_spam_for_me View Post
                I don't believe you had a look at the thread I had posted, because there are so many PCB pictures and PCB label information that you wouldn't ask this question if you have a look at this thread...
                im just trying to understand what does the pcb determine, does it have to do wIth wifi chips likE AP6210?

                HTC-T018-V2 WITH ap6210

                thats what it says on the board

                how do i connect that to firmware(woowww im such a newb at this lol)
                Last edited by veganboy; 19 August 2014, 15:11.

                Comment


                  #9
                  First time I heard about a PCB printed with 'HTC-T018-V2' ...

                  First I found a picture of the 'HTC-TO18-V4' (I also never heard before):


                  Then I found this:


                  Maybe you will find a solution at one or both of these threads...

                  Can you please edit the Thread topic via [edit] at post #1 -> [advanced]...
                  with something like this:
                  CS968 MTK T018 'HTC-T018-V2'

                  And please give a feedback if it helps.
                  RK3288 Devices
                  - Overview BOX (LINK !)
                  - Overview STICK (Dongle) (LINK !)

                  MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
                  UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
                  Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
                  Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

                  RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
                  Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

                  Comment


                    #10
                    Originally posted by no_spam_for_me View Post
                    First time I heard about a PCB printed with 'HTC-T018-V2' ...

                    First I found a picture of the 'HTC-TO18-V4' (I also never heard before):


                    Then I found this:


                    Maybe you will find a solution at one or both of these threads...

                    Can you please edit the Thread topic via [edit] at post #1 -> [advanced]...
                    with something like this:
                    CS968 MTK T018 'HTC-T018-V2'

                    And please give a feedback if it helps.
                    hey mate thanks for the research

                    i dont think this is the mtk version of cs968, it says ap6210 and i think that is the wifi chip ....isnt it?

                    Comment


                      #11
                      Yes, AP6210 is the WiFi/BT chip... I hadn't read the threads...
                      RK3288 Devices
                      - Overview BOX (LINK !)
                      - Overview STICK (Dongle) (LINK !)

                      MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
                      UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
                      Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
                      Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

                      RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
                      Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

                      Comment


                        #12
                        But at the second link the PCB also use the AP6210 ?
                        Maybe follow the link at

                        BUT it seams so, that this guy has many problems to get WiFi/BT working...
                        BUT he seams to be able to get it working


                        I think the best way is to ask Tech1 at his thread which FW you can use with the AP6210 at this PCB....
                        RK3288 Devices
                        - Overview BOX (LINK !)
                        - Overview STICK (Dongle) (LINK !)

                        MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
                        UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
                        Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
                        Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

                        RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
                        Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

                        Comment

                        Working...
                        X