R89-Hardware/Thermal/case issue feedback here

[oman]

回复: R89-Hardware/Thermal/case issue feedback here

I will test that file later today. Is it a new update.zip or the same file from last week?

The same file as last week

来自我的 GT-I9300 上的 Tapatalk

[Arbelzapf]

I just tested everything with XBMC as well (with the setup in the screenshots above), just to see if there's any difference.... nothing but complete silence

[ssspacman]

Tested file. No improvement, same results as before. XBMC HDMI transcoding sound 0.1 seconds every 1 seconds. In SPMC hissing sound. Transcoding through sdif optical perfect 5.1 dolby.

Uploaded on youtube. Notice surround system should only say dolby a few seconds.
First SPMC hdmi arc.
Second XBMC hdmi arc.
Third XBMC connected with optical.

https://www.youtube.com/watch?v=3MO3UFgVzNM&list=UU_dcS6NEUCKQ2l1ubTv6Alw

http://www.youtube.com/watch?v=3MO3UFgVzNM&list=UU_dcS6NEUCKQ2l1ubTv6Alw

[ENDRJUPL]

I'll test it later this evening.

[Arbelzapf]

For HDMI passthrough issue...because I tested with the same FW/HW..it's almost ok..

Hope everyone of 20 who have the AV receiver can test it and give me a little more info..

1. I upload an AC3 videos,pls test this:

http://www.mediafire.com/download/z8gm0c2dq9q5pcw

2.About the FW version,pls update the latest 108k4 by OTA,then update another zip:update.zip

3.And the Settings to be proper..

I wish I had better news, but audio is still dead on my receiver. Just to make sure there's no miscommunication, this is what I did:

- I downloaded the update.zip
- Moved it to the root of the internal sd-card
- Rebooted
- I was prompted with a dialog that an update was ready, so I chose to install it
- When it was done installing, I opened the Gallery app and played the video you linked ( Sound Setting : Bitsream) --> No Sound
- I switched the setting to default and tried again ->still no sound.

The front panel of my receiver usually shows the current audio setup (ie. the channels it's receiving) and that part is completely blank when the R89 is active. This is probably to be expected given the nature of the problem, but I just thought I'd mention it anyway

[Talas]

Okay,thank you..Hear about you go to IFA, what do you think about smart watch,if we design one ...

Yes it was watch heaven at IFA..some on the floor and behind the scenes my advice would be to go for an oblong design which commands all finger sizes..i love the Moto 360 but its fairly small to handle as most round watches are and if you are going for a workable device that can do more..more..bigger is better Apple seem to have a perfect size in the Apple watch as for being convined my self about having a watch replace a smartphone im very much unconvinced by current and forthcoming tech..Smartwatch just isnt ready yet or needed for that matter.

[ssspacman]

I will test that file later today. Is it a new update.zip or the same file from last week?

[oman]

I modify something...will upload the update.zip..

Here is my test result:

Firstly,you should select the right option:


For spdif passthrough,select the second one..
For HDMI passthrough,select the third one..



Select all this audio passthrough options.


Then,

If not passthrough way,no Dolby/DTS can sound out by stock rkvideoplayer

If spdif passthrough, stock rkvideoplayer cant decode DD+ sound..but with xbmc is fine..
If HDMI passthrough,all seem fine..

Pls check it...I dont want push to OTA,just a test zip..

Here to download->update.zip

Put the update.zip to sd card or eMMC via usb OTG..then it will find it..

BTW,the HDMI 2.0 3180*2160 50/60Hz is also added,Talas ,pls check this.

For HDMI passthrough issue...because I tested with the same FW/HW..it's almost ok..

Hope everyone of 20 who have the AV receiver can test it and give me a little more info..

1. I upload an AC3 videos,pls test this:

http://www.mediafire.com/download/z8gm0c2dq9q5pcw

2.About the FW version,pls update the latest 108k4 by OTA,then update another zip:update.zip

3.And the Settings to be proper..

[oman]

HDMI 2.0 3180*2160 50/60Hz:Tested 9 files and confirmed WORKING slight judder but only slightly and rechecking some files to see if its the encoding rather than anything else.Great news indeed.

Okay,thank you..Hear about you go to IFA, what do you think about smart watch,if we design one ...

[Talas]

does that mean your box can handle now 4k@50hz?

thanks
holli

HDMI 2.0 3180*2160 50/60Hz:

Tested 9 files and confirmed WORKING slight judder but only slightly and rechecking some files to see if its the encoding rather than anything else.Great news indeed.

[tltester]

No Passthrough in SPMC with latest firmware applied and my Pioneer AMP.

The behaviour is different this time: the receiver doesn't switches to the passthrough mode at all and there is no sound coming from speakers (before it was a static noise).

[Arbelzapf]

Here is a dmesg after booting, still without sound. Not even spdif works

http://pastebin.com/nFgR1P2g

[holli73]

...
BTW,the HDMI 2.0 3180*2160 50/60Hz is also added,Talas ,pls check this.

does that mean your box can handle now 4k@50hz?

thanks
holli

[goldenrod]

Hope your time off is great oman!

I agree that the HDMI audio issue is the only really big issue remaining. On my Onkyo, I get no audio on HDMI passthrough with the patch installed.

[oman]

回复: R89-Hardware/Thermal/case issue feedback here

Oman, Did you down load the dmesg and logcat I posted for you at my Dropbox?

Not yet,its Mid-autumn festival in China..we are off work these days..and I should view dropbox by vpn..at home,I dont have vpn...waiting other guys feedback.

来自我的 GT-I9300 上的 Tapatalk