Need direction...need ROM RK3188 818

[ScottyD]

Hello. This is my 1st post.
I have been searching for the ROM to get my android tv box working again. I've been getting 1/2 of tv screen black and right side with thick lines...
My other android box freezes on the startup screen. Can see the droid then a picture like on the web site that I purchased boxes from:

http://www.androidtv.com

Specs: KitKat 4.2.2
2GB ram
quad core Cortex A9 Processor
CPU 28nm RK3188 1.8GHz
GPU: quad core Mali-400 MP4, 533MHz
Toshiba DDR3 2GB at 1333MHz
WLAN 2.4 AP6210
The link above goes to the site and BUY NOW goes to the SPECS

Seems to have a hick up or something.
Here's what I've been searching for now.....3 days
ROM Loader - I have v1.35 and v1.37
RK3188 ROM (Loader.bin file) for the CX-818

I'm new to this language. I use to script html. This is a new animal that I'm trying to learn.
Any positive assistance would be greatly appreciated.

Respectfully....
Scotty D

[Finless]

AndroidTV has sold a few different models with those specs. Got a picture of the exact unit you have. FYI I am sure there is a ROM here as I have made a couple myself for AndroidTV.

Bob

[ScottyD]

AndroidTV has sold a few different models with those specs. Got a picture of the exact unit you have. FYI I am sure there is a ROM here as I have made a couple myself for AndroidTV.

Bob

Sorry it took so long.

[Finless]

OK that is basically a CX921b (b=Bluetooth).

Look through this forum there are many posts and a few ROMs.

http://www.freaktab.com/forumdisplay.php?137-Measy-amp-CX-TV-Players

I made the ROM this ships with back in March but it is probably updated since then. Possibly they are using the wasser ROM. I don't know for sure now.
AndroidTV is usually pretty good at responding. Did you try contacting them?

Bob

[ScottyD]

I did and you are correct....wasser is who made their latest rom for the 921b.

And it comes with a batch tool too...will post link here.

Thanks so much for your help....will post up results.

http://www.freaktab.com/showthread.php?12282-NEW-CX921B-wasser-firmware-1-0-3-Kikat-Android-4-4-2

[ScottyD]

Now computer wont recognise that android 921 is plugged in


Where specifically should drivers be installed?

Win 7
and lappy is XP Home

[ScottyD]

I have 3 computers here and none recognize the drivers.

It's nice since I have 2 friends Android boxes that all need software flash to regain functionality.
Each has died in its own way. The blue light comes on but no matter what I do, it all stops here at the computers. I have all the tools but stuck on something.
Would it be better to wait a month for tech support to fix? He lives right down the road and I know him. He's no help so I'm stuck with 3 dead AndroidTv boxes.
I've spent 3 days....sore buttocks....for nada.
Thanks for ID boxes Finless.

Time to load the skeet gun and find a volunteer to throw them into the air

[ScottyD]

Ok, for anyone who doesn't know....like myself....all this stuff is easy.
Just have to find the way.....so, without further ado....

Just like any Android stick or dongle, you have to press a Fn button to place into Flash mode. It finally dawned on me that I had seen that before. Bam:
Be careful, there is a Mic in there too. So press softly, feel the click, have someone plug usb into computer. I found it's easier if you plug the power-usb into the box 1st then have someone plug usb into computer while holding Fn button in with paper clip. Hold for a few seconds and the computer will see and take care of drivers blah blah. Just have the .img ready to go and flash on brothers and sisters.

[ScottyD]

FINLESS.....need your help here buddy.

This is what i'm looking for

Is this still available??