NEW - Arnova 9G2 Snakekiller ROM - ICS - BETA 1

[pswartout]

Snake / Bob,

To make 100% sure I didn't screw it up again I re-flashed with "Arnova_9G2_ICS_Full_Root_Snakekiller_1.4 beta", booted up then back into download mode and selected the recovery.img from arnova9g2_gingercomb_finless21a_cwm.
I then booted up and rebooted into recovery mode.
The CWM menu from Bob's ROM started but with the following displayed

E:Can't open /dev/block/mtdblock1
(no such file or directory)
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log

I can select the menu entries but nothing happens when I do. The navigation keys at the bottom of the screen don't seem to work either.

All in all I would say this didn't work

[pswartout]

What parameter file are you using? If you flashed snakekiller ROM you should use his parameter file and my recovery. If you just opened my 9g2 ROM kit and tried to flash recovery directly from that then you are using my parameter file! Remember the parameter file is what tells the flash to WHERE to flash each thing. So you should copy my recovery into snakekillers ROM kit so your using his parameter file.

Bob

Ahh, that's what I've done wrong. I'll give it another go later and let you know how I get on

Paul

[Finless]

What parameter file are you using? If you flashed snakekiller ROM you should use his parameter file and my recovery. If you just opened my 9g2 ROM kit and tried to flash recovery directly from that then you are using my parameter file! Remember the parameter file is what tells the flash to WHERE to flash each thing. So you should copy my recovery into snakekillers ROM kit so your using his parameter file.

Bob

[snakekiller]

Re: NEW - Arnova 9G2 Snakekiller ROM - ICS - BETA 1

can you help bob why is your recovery not installed over my recovery
or must you take erase idb

Verstuurd van mijn ARN10bG3-FreakGenTab met Tapatalk

[pswartout]

Doesn't seem to work. Here's the steps I took;

1. shut down the tablet
2. put tablet into download mode (menu + reset)
3. fired up RK29update.exe included within Arnova_9G2_Finless_GingerComb_v2.1a CWM and only selected recovery
4. once tablet had restarted I then rebooted into recover mode (using the reboot app)
5. tablet started in ClockworkMod Recovery v5.8.2.4 (it says "a snakekillerRecovery.." at the top of the screen)
6. install from zip

I get the same results. Have I missed something here? Is there another step I need to do?

[snakekiller]

Re: NEW - Arnova 9G2 Snakekiller ROM - ICS - BETA 1

ok ,pswartout flash just the recovery.img from bob again. without erasing idb.
you not lose userdata with that.
and look if the aroma installer works with the buttons on bob's cwm recovery

Verstuurd van mijn ARN10bG3-FreakGenTab met Tapatalk

[Finless]

No the CWM touch I used is generic and does not need coordinates. It just works as it has soft buttons at the bottom for navigating.

Bob

[snakekiller]

Re: NEW - Arnova 9G2 Snakekiller ROM - ICS - BETA 1

yes that's wright bob

Verstuurd van mijn ARN10bG3-FreakGenTab met Tapatalk

[snakekiller]

Re: NEW - Arnova 9G2 Snakekiller ROM - ICS - BETA 1

ok bob download a few posts back the installer if you want.
and open the zip and open updater script there you see the screentouch coordinates for the 10b g3.
did you have too do that for your cwm?
so yes can you replace the coordinates too this script

Verstuurd van mijn ARN10bG3-FreakGenTab met Tapatalk

[snakekiller]

Re: NEW - Arnova 9G2 Snakekiller ROM - ICS - BETA 1

that's wright here too but that won't works with stockrom too.
i must find a way how i must remove that in settings

Verstuurd van mijn ARN10bG3-FreakGenTab met Tapatalk

[Finless]

Just to let you know that selecting "additional system updates" causes settings to crash.

Sent from my ARN9G2-Freaktab using Tapatalk 2

First that update thing never works as Arnova does not have a repository. In AOSP that has been removed so that menu choice will always force close. I think once the ROM gets finished Snaky can remove that menu choice from settings.apk

Bob

[pswartout]

Re: NEW - Arnova 9G2 Snakekiller ROM - ICS - BETA 1

The CWM in my 9G2 ROM is a touch version that works on the 9G2.

Bob

Guys, happy to test out whatever you come up with.

Sent from my ARN9G2-Freaktab using Tapatalk 2

[pswartout]

Re: NEW - Arnova 9G2 Snakekiller ROM - ICS - BETA 1

Just to let you know that selecting "additional system updates" causes settings to crash.

Sent from my ARN9G2-Freaktab using Tapatalk 2

[Finless]

The CWM in my 9G2 ROM is a touch version that works on the 9G2.

Bob

[snakekiller]

Re: NEW - Arnova 9G2 Snakekiller ROM - ICS - BETA 1

this one too bob but the aroma installer i created for the 10 b g3 works on touch and buttons.but wont work on this touchscreen for this tablet.and this tablet has also no volume buttons for scrolling
thats the problem

Verstuurd van mijn ARN10bG3-FreakGenTab met Tapatalk