[Pipo-Project] Kernel building header

[Slowry]

M6 dump

Hi,

Here is a dmesg / GPIO dump for pipo max m6 (no 3g).
Hope this help !

How much M6 max (no gps) and M6 pro (gps) roms are different ?

[lixi]

PIPO U8T

I want you to step forward would be PIPO U8T development.
I do not understand why there is very little information U8T model.Very good Tablet would should be developed the software.
To do so, please help.
Since the I have such a tabletif you need to more help when I can.

Modell: PIPO U8T
WDCMA/GSM: Long ung U7501, LWA0022.1.2_M811
WIFI: AP6210
HDMI: RK618
Touch:f15406EE8
GPS: HV5820
Voltage Controll: ACT8846
LCD: S-WMPIL-0618B
Unknow: MPDH 2625 816
Senzor:
GRAVITY SENSOR
Vendor: Freescale Semiconductor
COMPASS MAGNETIC FIELD SENSOR
Vendor: Asahi Kasei
COMPASS ORIENTATION SENSOR
Vendor: Asahi Kasei
GYROSCOPE SENSOR
Vendor: STMicroelectronics
PROXIMITY SENSOR
Vendor: Dyna Image Corporation
Trigger LIGHT SENSOR
Vendor: Dyna Image Corporation
PRESSURE SENSOR
Vendor: ms5607
TEMPERATURE SENSOR
Vendor: ms5607
ROTATION VECTOR SENSOR
Vendor: Google Inc.
Trigger GRAVITY SENSOR
Vendor: Google Inc.
LINEAR ACCELERATION SENSOR
Vendor: Google Inc.
Trigger ORIENTATION SENSOR
Vendor: Google Inc.
CORRECTED GYROSCOPE SENSOR
Vendor: Google Inc.

[malfrat]

THIS IS FOR THE KERNEL ONLY

My intention is to try to build for as many of the 'old' Pipo tablets as I can't work out how to. I'll add drivers and configuration as people request.

I'll link each individual build project in here as I progress

1. M8HD - here (working)
2. M7pro - here (booting, unlocks but then problems?)
3. M9Pro - here (building ....)
4. M6Pro - full ROM created by Maakie here

U8 - test kernel fails to boot

This M9 pro kernel thread is mainly for KK kernel ? or also plan to release a JB kernel and OC'ed pack ? Probably there's many users like me who's loving both system. Of course building from source could take lot of time... thx for your effort and also thx to pipo to release kernel source to dev. Now i'm testing almost 40 different of jb kernel with different voltage and freq, all test are made on riley 2.7 JB rom, the best i could reach 26444 all stable. After all my jb kernel test i'll go for KK kernel test, could reach 23469 lighting fast and stable, TS is also more responsive than jb kernel and sound is very much better and louder..maybe the driver

once jb kernel test i could post all the pack with detail separate result for each kernel like 26444-14fps-RileyROM_2.7_JB.txt in each separate kernel folder. it could help to get a point of view about best config to oc at is best performance in one post and test kernel always on the same the same rom.... i know a kernel could score xxxxx on a certain rom and only yyyyy on other rom

i'll try to do my best to speed up my test to help this thread and focus only with your test kernel release to get a final version better than pipo stock if possible, i hope

Regards

[Matador]

d33 I wanted to make my own Kernel, just now i disabled Selinux in Kernel_def but i have trouble with make:

ente@Bilbo:~/android/kernel/RK3188_tablet_kernel_sources$ make
make: arm-linux-gnueabihf-gcc: Befehl nicht gefunden
CHK include/linux/version.h
CHK include/generated/utsrelease.h
make[1]: 'include/generated/mach-types.h' is up to date.
CC kernel/bounds.s
/bin/sh: 1: arm-linux-gnueabihf-gcc: not found
/media/ente/ef7a5be8-5519-4ca7-8067-db7b56a75569/android/kernel/RK3188_tablet_kernel_sources/./Kbuild:35: recipe for target 'kernel/bounds.s' failed
make[1]: *** [kernel/bounds.s] Error 127
Makefile:994: recipe for target 'prepare0' failed
make: *** [prepare0] Error 2

Have you any tipps for me?

I use Ubuntu 15.4 64bit


Thanks in advance.

Matador

[d33]

make: arm-linux-gnueabihf-gcc: Befehl nicht gefunden

you need the cross compiler installed

http://freaktab.com/forum/developmen...build-a-kernel

[Matador]

It was a missing path, i found a good Instruction in http://source.Android.com/source/building-kernels.html

Gesendet von meinem rk3188 mit Tapatalk

[raxy]

go Matador, go ! its go to see you joining the effort.

[Matador]

Raxy was it you how ASK for a selinux off kernel?

I managed to make one this morning for my m9pro, based on D33 sources and golden-guy's omni-lp sources.
It was very easy after environmentproblems were gone.




Gesendet von meinem m9pro mit Tapatalk

[ciskos]

Hello.

I'm from this thread.

Is it possible to build a kernel for my tablet with inverted x axis?

Here is some info about my tablet:

1. Model Name - Pipo M9 Max
2. Screen model name - F-WGJ10162-V2 with chip GOODiX GT9271
3. Voltage regulator - Didn't know how it looks, but if I'm right here it is - MB-251 rev a
4. Wifi chipset - I'm sure on of this bluetooth, and another wifi -
i think this is bluetooth - MEDIATEK MT6622N
and this is wifi - Mediatek MT5931SA
5. HDMI - Didn't found it. I think it under cover, but right now I can't open it. Whatever I didn't use HDMI.
6. LCD - just model name - HSD101PWW2. MIPI, graphics? Mali-400 MP4, is it correct?
7. Sensors, hm, didn't know where they are, but here what I found
Gravity sensor: 0.2 mA by The Android Open Source Project
Compass Magnetic field sensor: 6.8 mA by The Android Open Source Project
Orientation Sensor: 13.1 mA by AOSP
Gyroscope sensor: 6.1 mA by The Android Open Source Project
Proximity sensor: 0.5 mA by The Android Open Source Project
Light sensor: 0.5 mA by The Android Open Source Project
Pressure sensor: 1.0 mA by The Android Open Source Project
Temperature sensor: 1.0 mA by The Android Open Source Project
Rotation Vector Sensor: 13.1 mA by AOSP
Gravity Sensor: 13.1 mA by AOSP
Linear Acceleration Sensor: 13.1 mA by AOSP

For now I'm using RileyRom 2.6.4 KitKat. But I can change it, if it's necessary.

Dmesg in attachment.

If some addittonal info required, just ask .
TIA.

P.S. Here how it looks like:

[ciskos]

Hello again.

So its not possible to builld such kernel, like I ask at previous post?

[kaglom]

hi,i have a similar problem but its the y axis , up and down in landscape mode,someone know how edit or fix this?

Hello.

I'm from this thread.

Is it possible to build a kernel for my tablet with inverted x axis?

Here is some info about my tablet:

1. Model Name - Pipo M9 Max
2. Screen model name - F-WGJ10162-V2 with chip GOODiX GT9271
3. Voltage regulator - Didn't know how it looks, but if I'm right here it is - MB-251 rev a
4. Wifi chipset - I'm sure on of this bluetooth, and another wifi -
i think this is bluetooth - MEDIATEK MT6622N
and this is wifi - Mediatek MT5931SA
5. HDMI - Didn't found it. I think it under cover, but right now I can't open it. Whatever I didn't use HDMI.
6. LCD - just model name - HSD101PWW2. MIPI, graphics? Mali-400 MP4, is it correct?
7. Sensors, hm, didn't know where they are, but here what I found
Gravity sensor: 0.2 mA by The Android Open Source Project
Compass Magnetic field sensor: 6.8 mA by The Android Open Source Project
Orientation Sensor: 13.1 mA by AOSP
Gyroscope sensor: 6.1 mA by The Android Open Source Project
Proximity sensor: 0.5 mA by The Android Open Source Project
Light sensor: 0.5 mA by The Android Open Source Project
Pressure sensor: 1.0 mA by The Android Open Source Project
Temperature sensor: 1.0 mA by The Android Open Source Project
Rotation Vector Sensor: 13.1 mA by AOSP
Gravity Sensor: 13.1 mA by AOSP
Linear Acceleration Sensor: 13.1 mA by AOSP

For now I'm using RileyRom 2.6.4 KitKat. But I can change it, if it's necessary.

Dmesg in attachment.

If some addittonal info required, just ask .
TIA.

P.S. Here how it looks like: