Correct pins for shorting an MX2

[teleast]

As title states, I have looked for an image or even a post that show which pins I need to short to force boot from SDCard on an MX2. I have a few boxes that ar not responding to Benni's recovery image, I just get a blue light on the front and synchronous flashing lights on the ethernet port (when j45 plugged in).

[dlangejc]

Correct pins for shorting an MX2

Take a picture of you PCB.


Sent from my iPad using Tapatalk

[teleast]

Take a picture of you PCB.


Sent from my iPad using Tapatalk

Its a standard HD18 v2.22, same as this

[no_spam_for_me]

Maybe

http://www.freaktab.com/showthread.php?6025-Solution-for-stuck-in-Android-load-AML8726-MX-Dual-Core-TV-Box-Android-4-2-2&p=99483&viewfull=1#post99483

and the following posts...

EDIT
Here we are http://forum.androidgadget.co.uk/showthread.php?tid=161
and maybe also have a look at

http://www.slatedroid.com/topic/41478-how-to-unbrick-your-amlogic-aml8726-mx-series-tablet-v20/

(to identify the pin count)

[teleast]

thanks mate I will try these this evening, they are definitely hard bricked as the SDcard is definitely not being read.

edit 28/10

OK tried these, but one of those is for tablet and again the shorting for that board is not specified. This seems to be th problem I have is nobody can directly say, its these pins to get this board to force boot from USB

[dlangejc]

Correct pins for shorting an MX2

thanks mate I will try these this evening, they are definitely hard bricked as the SDcard is definitely not being read.

edit 28/10

OK tried these, but one of those is for tablet and again the shorting for that board is not specified. This seems to be th problem I have is nobody can directly say, its these pins to get this board to force boot from USB

One needs to get the board to go into masked mode, but I'm also not sure about the pins to short, check if you can find something on the NAND memory of your board, that's all I have, sitting with the same issue on my 802 board.


Sent from my iPad using Tapatalk

[teleast]

thanks for the advice, Ive done quite a bit of searching with no joy, the fact that there are several users here who have well documented knowledge of the board, I was hoping they could shed some light on it.

[dlangejc]

Correct pins for shorting an MX2

I reckon they want us to learn the hard way :-)


Sent from my iPad using Tapatalk

[teleast]

I reckon they want us to learn the hard way :-)


Sent from my iPad using Tapatalk

I've run out of pins on the NAND to short

[dlangejc]

Correct pins for shorting an MX2

I would be surprised if my NAND is screwed. :-)
I'll share here if I find something.


Sent from my iPad using Tapatalk

[Dexstar]

I've run out of pins on the NAND to short

There is no need to short the pins.

Checkout this method

http://www.freaktab.com/showthread.php?6025-Solution-for-stuck-in-Android-load-AML8726-MX-Dual-Core-TV-Box-Android-4-2-2&p=235921&viewfull=1#post235921

The nand scrubber is here

http://www.freaktab.com/showthread.php?6025-Solution-for-stuck-in-Android-load-AML8726-MX-Dual-Core-TV-Box-Android-4-2-2&p=236397&viewfull=1#post236397