HPH RK3288 ROM v1.2 by mo123 (20141117)

[sawbones999]

Better to just use a newer ROM.

Agreed, but have to use v1.2 to retain compatibility with the newer tronsmart IR remote. I ended up just inserting the libstagefright libs, ff libs, etc that you recommended to me from the wasser thread including some others into the mounted system.img file from v1.2.

Had to do it that way bc I tried doing it on a live system and it crashed and wouldn't boot properly afterwards. About to flash this new image and see if it works properly.

Cheers,
-SB

[sawbones999]

@mo123

Is it safe to copy all of the libs from v1.4 onto a v1.2 system running SPMC beta2, are there things there like a newer libc.so that I shouldn't use? Or should I just try and pick the specific video ones?

THanks!!!
-SB

[digitalriver]

Which screen resolution do you use? 4k or lower?

1080px60Hz

[sam_ugoos]

Im try all rk3288 firmware, ....wasser2.03, mo123 1.4, HPH, ugoos ut3, ubox 110,111, tronsmart,.... but as long as I'm not very happy. Each firmware has problems with stutters. SPMS 13.4 works better. And on not-ubox firwmare usually not work remote control, not shut down, etc....

Which screen resolution do you use? 4k or lower?

[digitalriver]

Did you try the initd stutter fix in the Wasser Rom thread?

no I think the problem is something else. More people tried to do this fix and nothing changes with stutters

[Batfink32]

Re: HPH RK3288 ROM v1.2 by mo123 (20141117)

Im try all rk3288 firmware, ....wasser2.03, mo123 1.4, HPH, ugoos ut3, ubox 110,111, tronsmart,.... but as long as I'm not very happy. Each firmware has problems with stutters. SPMS 13.4 works better. And on not-ubox firwmare usually not work remote control, not shut down, etc....

Did you try the initd stutter fix in the Wasser Rom thread?

[digitalriver]

Which firmware are you using? Do you get micro-stutters when streaming?

Im try all rk3288 firmware, ....wasser2.03, mo123 1.4, HPH, ugoos ut3, ubox 110,111, tronsmart,.... but as long as I'm not very happy. Each firmware has problems with stutters. SPMS 13.4 works better. And on not-ubox firwmare usually not work remote control, not shut down, etc....

[willlagreen]

My device is ubox with ugoos firmware In wasser firmware temperature file:
/sys/devices/ff280000.tsadc/temp3_input works correctly

Which firmware are you using? Do you get micro-stutters when streaming?

[no_spam_for_me]

/sys/class/hwmon/hwmon1/device/temp0_input

[digitalriver]

That path strongly depends on kernel used. Are you using one from UGOTOS on UBOX R89? Which ROM?


This reading is from /sys/class/thermal/thermal_zone/temp file.


Try this path: /sys/device/*.tsadc/temp0_input
(tsadc = Temperature Sensor Analog Digital Conventer)

My device is ubox with ugoos firmware In wasser firmware temperature file:
/sys/devices/ff280000.tsadc/temp3_input works correctly

[Gormar]

This temperature file works correctly for Ubox r89:
/sys/devices/fff16000.ug_fan/cpu_temp

That path strongly depends on kernel used. Are you using one from UGOOS on UBOX R89? Which ROM?

EDIT: well, it works. Sort of. First temp reading was 2600C lol

This reading is from /sys/class/thermal/thermal_zone0/temp file.


Try this path: /sys/device/*.tsadc/temp0_input
(tsadc = Temperature Sensor Analog Digital Conventer)

[digitalriver]

and I don't know which file to use.

This temperature file works correctly for Ubox r89:
/sys/devices/fff16000.ug_fan/cpu_temp

[sillykeith]

no driver no keytest output

If someone can make the kl file and upload it, it would help.
Here is also an app to get the keycodes of any remote.
https://github.com/downloads/chrisbo...st/KeyTest.apk

ill need the mceusb driver (and required libs) first before i can get keytable to work/output usable data. the only thing i get when pressing buttons on my mce remote are dmesg output lines that say USERCODE=74F0.

probably best to send the driver as an update.zip to minimize installation issues. although, if all i need is the .ko file then insmod should work, right?

Maybe this, please test.
http://repo.xposed.info/module/info....utempstatusbar

I just saw you mentioned it in one of your other posts
Will check it right away...
Thanks.

EDIT: well, it works. Sort of. First temp reading was 2600C lol
But all that the module do is reading from one of 30+ temp files, and I don't know which file to use.
The temps are changing up and down the scale, but without proper configuration, it's not really useful.
Anyone else can check it out?

There is a Xposed module to read temperature sensors out. Not diffcult. Basically just a file under /proc, just like in Linux.

Would you care to share Xposed module name with us?
Thanks.