HPH RK3288 ROM v1.2 by mo123 (20141117)

[sillykeith]

MCE driver included.
Can you maybe provide MCE remote .kl file to change remote keys, can only find one for AMLogic?
Or make one?

I believe this link should help. They use rc6_mce for the .kl

[hueb_s]

There is a Xposed module to read temperature sensors out. Not diffcult. Basically just a file under /proc, just like in Linux.

[digitalriver]

You have a separate kernel.
Can try my ROM with your kernel & resource.img, it should work.

This method works only when your firmware was flashed into AndroidTool. But if your or other firmware was flashed how "update" into OTG or SD-Card - this method not work. And I don't know, why

[Bentalk]

If you don't replace kernel/resource.img does it work?

I did, I tried your rom with replace my own kernel.img and resource.img and flashed to my CR12 A6330 box, it just can't boot up. You mean I need to use your rom kernel/resource.img as well?

[Bentalk]

New ROM v1.4 Released

Audio: fix bitstream pause/seek maybe noisy or no sound
Android->Camera:Adjust the OV13850 direction
Audio: kernel: add support for lossless audio
Audio: update hal for direct
Not sure of other changes, based on latest 30-12-2014 firmware

SPDIF passthrough now works in SPMC
Latest SPMC included
1080p Youtube
Wifi tweaks
Full left over device space used for Apps
Solo Launcher, now with Material design theme
De-bloated stock Apps, only minimum apps included
Boots fast

For people that flashed v1.3 ROM(Android Only) you can probably reflash
boot,kernel & system, but not tested.
If you want all apps included it's better to stay on v1.3 ROM
Only use this if you want a clean ROM or working SPDIF passthrough.

To root ROM type the following in the calculator app
!^06^

Link: Here

Happy new year.

hi mo123,
Can this firmware work on CR12 Cloudnetgo RK3288 (wifi A6330)?
I am using Lan connection (do not use wifi),
I tried flashed your rom with my kernel.img and resource.img, it won't work, just can't boot at all..
Anyway can try your rom ?

I would also propose a nice way to read out CPU usage/temps on the top bar ( similar to the Ugoos UT3 firmware.)

I would also like to see that feature. Is there some 3rd party app for rk3288 that can do that?
There are some cases when I'm interested in temps, so I have to "measure" it by touching the box with my palms

[mghb]

You can use this kernel I made for Beelink R89.
Use it with my HPH RK3288 ROM v1.2/v1.3(remember to use separate updated boot.img)/v1.4 and v1.5(to be released).

http://www.mediafire.com/download/esw48uaxha3fahh/kernel.img

PS: Remember to use your stock resource.img from the unpacked Beelink/Ubox R89 mediafire link I posted above for remote to work correctly.

tanks for your reply.may you say how do you make kernel with boot.img?

[eebrains]

please include mceusb driver and mce ir remote files.

See this thread http://www.freaktab.com/showthread.p...and-MCE-remote

I second this notion. While air mouse is nice and ideal, the wife likes IR remotes much better...

I would also propose a nice way to read out CPU usage/temps on the top bar ( similar to the Ugoos UT3 firmware.)

Not sure if you can do anything about it, but the repeated character bug when input comes in through a USB port is very annoying. (non-OTG) The only workaround today is to run all input thru the OTG port.

[sillykeith]

sugestions for next ROM

please include mceusb driver and mce ir remote files.

See this thread http://www.freaktab.com/showthread.p...and-MCE-remote

[Gormar]

You can use this kernel I made for Beelink R89.
Use it with my HPH RK3288 ROM v1.2/v1.3(remember to use separate updated boot.img)/v1.4 and v1.5(to be released).

http://www.mediafire.com/download/esw48uaxha3fahh/kernel.img

PS: Remember to use your stock resource.img from the unpacked Beelink/Ubox R89 mediafire link I posted above for remote to work correctly.

Yes man, this is great. I don't need anymore to tamper with resource.img from yours ROM to install yours kernel on R89. Especially if I do not completely understand why in "flat device tree blob" (dtb) there are three GPIOs associated with ACT8846 driver (GPIO7? A1 Active Low as VSEL, GPIO0 A2 Active Low as SLEEP??, GPIO0 A2 Active Low as POWER_HOLD?) when FireFly (GPIO7 B6 Active Low as VSEL and GPIO0 A1 Active High as PWR_HOLD) and Beelink R89 declare only two (GPIO7? A1 Active Low as VSEL and GPIO0 A6 Active High as PWR_HOLD).

I will try to install your ROM v1.4 in my Beelink R89 on next day or v1.5 if it will be completed until then .

[Thomasqqq]

Can you reupload the boot.img to a different host?
The previous download link is filehopper, boot.dol and doesn't seem to work.

Link to my Dropbox
https://dl.dropboxusercontent.com/u/16513602/Image.rar (20mb)
It include everything except the system.img. Let me know if you need any files and i will provide it.

[Thomasqqq]

HPH RK3288 ROM v1.2 by mo123 (20141117)

Hi mo123.. Was it possible to make a boot.img for the rikomagic i posted for you some time ago?? The rikomagic mk902ii.. Regards


Sent from my iPad using Tapatalk

[mghb]

latest boot.img r89

Then Beelink puts the kernel inside the boot.img.
Will try to modify the boot.img with kernel so it works on your device.
Can you upload the boot.img only, since I don't want to download a complete ROM for only boot.img?

excuse me for I was late.the link of latest boot.img for r89 is

https://drive.google.com/file/d/0ByhzzhpGyX-wblRxOXN0bTU0QXc/view?usp=sharing

[mghb]

Then Beelink puts the kernel inside the boot.img.
Will try to modify the boot.img with kernel so it works on your device.
Can you upload the boot.img only, since I don't want to download a complete ROM for only boot.img?

hi and thanks for your reply.
I will upload boot.img of latest firmware's r89 and make link it.

[mghb]

latest kernel for r89

Then you can unpack firmware with flash tool(second tab) and flash kernel.img and resource.img with my ROM's or just use latest stock firmware here
http://www.mediafire.com/download/68...k4110_1219.img

hi
I've downloaded this link and unpacked it but there is no kernel in.

http://www.mediafire.com/download/7wgrgc5sboe17oj/update_R89_111k4110_beelink.img

would you please upload latest kernel for r89?
thanks.