J22 cx 919 ii help

[avgan]

hi friends
J22 cx 919 ii 4.4.2 kitkat
my rom crashed

rom did try but could no find a working wifi rom help

what do I need to instal rom and how?

[awatch]

Yesterday I've installed wasser with an extra kernel.
Wifi and BT works, Netflix and first 1080p-tests as well


ROM:
I use "wasser-firmware-kr42-new-1.0.4.img", flashed with RkBatchTool v1.7 -> Restore.

http://www.freaktab.com/showthread.php?9593-UPDATE-T-R42-wasser-firmware-Kikat-Android-4-4-2

Kernel:
"kernel_KK_v4.2.5_TVSTICK_AP6210-Alt_HD.img" from "AP6210-Alt", flashed with RkAndroidTool v1.37
http://www.freaktab.com/showthread.p...All-(well-most!)


I'm not really sure whats the difference between wasser old and new.
I've tested a lot of ROM's and Kernels, this was the only working combination.

HowTo:
1.) Open RkAndroidTool
- 2x [EraseIDB]
2.) Open RkBatchTool
- select ROM image
- [Restore]
--> Device will reboot, wait until the Android booted.
--> At this time there is no Wifi/BT but video playback should be fine.
3.) Power Off and Re-Connect Device
4.) Open RkAndroidTool
-unselect all lines except the Kernel.
-change the line to look like this:
0x00004000 kernel C:\Path\to\your\kernel.img
- [Run]
Finish!

[awatch]

Yesterday I've installed wasser with an extra kernel.
Wifi and BT works, Netflix and first 1080p-tests as well


ROM:
I use "wasser-firmware-kr42-new-1.0.4.img":

http://www.freaktab.com/showthread.php?9593-UPDATE-T-R42-wasser-firmware-Kikat-Android-4-4-2

Kernel:
"kernel_KK_v4.2.5_TVSTICK_AP6210-Alt_HD.img" from "AP6210-Alt":
http://www.freaktab.com/showthread.p...All-(well-most!)


I'm not really sure whats the difference between wasser old and new.
I've tested a lot of ROM's and Kernels, this was the only working combination.

HowTo:
1.) Open RkAndroidTool
- 2x [EraseIDB]
2.) Open RkBatchTool
- select ROM image
- [Restore]
--> Device will reboot, wait until the Android booted.
--> At this time there is no Wifi/BT but video playback should be fine.
3.) Power Off and Re-Connect Device
4.) Open RkAndroidTool
-unselect all lines except the Kernel.
-change the line to look like this:
0x00004000 kernel C:\Path\to\your\kernel.img
- [Run]
Finish!