[Pipo-Project] M9Pro kernel

[d33]

Whilst we are waiting for the correct configs, I'm trying to guess the right settings. Anyone brave enough to test:

1. Let me know if the test kernels boot
2. Provide DMESG of my kernel
3. Provide 'stock' DMESG and GPIO DUMP

I've seen a DMESG from an M9Pro uploaded elsewhere and I'm using it as a start. It would be REALLY useful if someone could provide the make/model of the LCD.

[d33]

• LCD = MIPI DSI driven via 2828 using dclk = 148500000 @ 61 fps
• Battery driver = cw201x on i2c 1-0062
• lightsensor = us5151
• accelerometer = lis3dh (i2c 0-0019, GPIO 175)
• compass = akm89639i2 (i2c 0-000d, GPIO 287)
• gyro = l3g4200d (i2c 0-0069, GPIO 172)
• audio codec = RT5631 (i2c 4-001a)
• wifi/bt = ap6476
• front camera = ov2659 (i2c 3-0030)
• rear camera = ov5640 (i2c 3-003c)
• Touchscreen = Goodix GT928 (i2c ?-005d, GPIO ?)

Which makes it almost identical to the M7pro kernel I built yesterday!

[d33]

I seem to be working on my own here :-/
The LCD make/model is apparently either AUO B101UAN01 or Chungwa CLAA101FP01

I'll build a test kernel this evening

[d33]

• Auo B101UAN01 LCD (MIPI DSI driven via 2828 using dclk = 148500000 @ 61 fps)Battery driver = cw201x (i2c 1-0062)
• lightsensor = us5151
• accelerometer = lis3dh (i2c 0-0019, GPIO 175)
• compass = akm89639i2 (i2c 0-000d, GPIO 287)
• gyro = l3g4200d (i2c 0-0069, GPIO 172)
• audio codec = RT5631 (i2c 4-001a)
• wifi/bt = ap6476
• front camera = ov2659 (i2c 3-0030)
• rear camera = ov5640 (i2c 3-003c)
• Touchscreen = Goodix GT928 (i2c ?-005d, GPIO ?)

Which makes it almost identical to the M7pro kernel I built yesterday!

Note this is VERY similar to U30GT2 too.

• Auo B101UAN02 LCD
• Focaltech FT5x0x touchscreen
• Broadcom BCM903 wifi/BT
• uPI US5151 light sensor
• Pololu LSM303 3D Compass / Accelerometer
• - Motion MEMS L3GD20
• - lis3dh accelerometer
• iTE iT66121 HDMI transmitter
• Haoyu HYM8563 real time clock
• Everest ES8323 audio codec/amp
• Active Semi ACT8846 power regulator
• OmniVision OV2659 front camera (2mp)
• OmniVision OV5640 rear camera (5mp)

[blusydays]

Whilst we are waiting for the correct configs, I'm trying to guess the right settings. Anyone brave enough to test:

1. Let me know if the test kernels boot
2. Provide DMESG of my kernel
3. Provide 'stock' DMESG and GPIO DUMP

I've seen a DMESG from an M9Pro uploaded elsewhere and I'm using it as a start. It would be REALLY useful if someone could provide the make/model of the LCD.

Hi D33,

I've just discovered your thread, I've given Riley my own DMESG yesterday, here's the pastbin link : http://pastebin.com/1vvYRqH0

How and where I can see the LCD model.

[d33]

Hi D33,

I've just discovered your thread, I've given Riley my own DMESG yesterday, here's the pastbin link : http://pastebin.com/1vvYRqH0

How and where I can see the LCD model.

You'd need to disassemble your tablet.

However, I found reference to it online and so think I know.

[blusydays]

You'd need to disassemble your tablet.

However, I found reference to it online and so think I know.

ok, let me know if I can help.

[d33]

Ran out of time tonight, although have made progress with M7Pro which will help for M9 too

[rrileypm]

I've moved this thread to the new Development Projects sub-forum.

[Jak]

Pipo PH

We have sticky posted Pipo project on our group on facebook...

[Timebandit]

How's It Going

Hi D33, how's things going with this one?

[d33]

I got the builds started and assumed the others would push it on whilst I moved on to the RK3288 box builds.

I built a Cube U30GT2 kernel for testing which is very similar, but no-one has tested it! I'll see what I can do tonight but in truth I think it's unlikely I'll find time until the M9pro Randy ordered for me arrives

[d33]

• LCD = MIPI DSI driven via 2828 using dclk = 148500000 @ 61 fps
• Battery driver = cw201x on i2c 1-0062
• lightsensor = us5151
• accelerometer = lis3dh (i2c 0-0019, GPIO 175)
• compass = akm89639i2 (i2c 0-000d, GPIO 287)
• gyro = l3g4200d (i2c 0-0069, GPIO 172)
• audio codec = RT5631 (i2c 4-001a)
• wifi/bt = ap6476
• front camera = ov2659 (i2c 3-0030)
• rear camera = ov5640 (i2c 3-003c)
• Touchscreen = Goodix GT928 (i2c ?-005d, GPIO ?)

Which makes it almost identical to the M7pro kernel I built yesterday!

M7Pro
LCD is LD089WU1 MIPI DSI driven via SSD2828 using dclk = 128000000 @ 53 fps.
battery: cw2015 driver
sound: rt5616
BF/wifi: AP6476 (need GPIOs)
Rear camera: ov5640
Front camera: ov2659
Touchscreen: Goodix GT928 on i2c channel 4-0x5d (need GPIO ??)
accelerometer: gs_lis3dh i2c 0-0x33 GPIO 175
compass ak89630 i2c 0-0x48
gyroscope: l3g4200d_i2c 0-0xd3
Light Sensor: us5151

So only difference between M7Pro and M9pro is LCD and sound codec!

[rrileypm]

D33, I'm working at the hospital today...but if you need a tester for your M7 Pro kernel....I can try it Saturday at the firehouse.

[d33]

First M9Pro test kernel

Pushed to Git