My cube currently has a hardware fault and I cannot flash it so until we have confirmation that the rom is good this should be considered a BETA. I have applied all these changes to my Cube Mini so it should be good.
- Rooted
- bloat removed
- English
- market/play fix for more apps *
- busybox integration
- init.d support
- Clockwork Recovery by FinlessBob
- 2 gig space for apps
here's the download, please read and follow the readme*
ROM -> U30GT W 900supersport_1.1c.zip (290 Meg)
Instructions
- Remove sdcard before flashing otherwise it may get re formatted
- Unzip
- open the folder.
- Connect the cube
- Double click the ROM Flash Tool
- start the cube in flash mode (hold vol+ and power for 3 to 4 seconds then release power then volume)
- If you do not have drivers already installed they are included with the rom kit in the drivers folder
- Once drivers installed the flash tool should see your cubeand update the status at the bottom
- Click the [Erase NAND (IDB)]button, you should see progress recorded on the right up to 4096
- Once complete click Flash ROM, again follow progress until done
- The cube should now restart, it will pause on the peas screen for a while as filesystems are formatted mounted and initialised
The Cube should now reboot showing my boot animation and then start up in English.
Feedback appreciated as I cannot test this
Enjoy
PS I've included a touch based recovery. if you want to try this click on the small rectangle to the right of recovery and browse to the 900supersport folder and select recoverytouch.img. If you have already flashed one of my ROMs you can flash just recovery.
PPS my thanks to the team here for providing the best technical info on the net on cooking ROMs
Comment