need help to wake up my M8 s82

[ficat]

I buy 02 beelink M8 s82 2g / 16g,
one for me and an nother one for my brother
so now no works without any reason, since it run the day before and the day after no red no blue light ,the box is dead, I test the power is good.
and that it 's for 02 boxes .
so i think it's soft not hard problem.
may be you can help me ?
thank you for all

sorry for my english

[no_spam_for_me]

Both devices have the same issue?
What have you done before this issue happens?

[ficat]

thank's for you answer



Both devices have been flashed with 108k about 3 months ago,I tried them out and they worked.After that I unplugged them because I was away from home for a while due to travelling.When I got back they didn't power on anymore.

kind regards

[no_spam_for_me]

hmmm, that sounds bad... damaged without using it (only without power for 3 month)...
Sorry, I have no idea what happened during this time...

Any change to test it with another PSU (but you wrote "power is good")?
Maybe let it stay plugged with the plugged/powered PSU for a longer time (maybe one day)
Also try to check what will happen if you press the micro-switch at the A/V hole
Or maybe what will happen if you press the power button at the IR

[no_spam_for_me]

Maybe it lost the/some information at nand (also only a speculation) so you should also have a look at

http://www.freaktab.com/showthread.php?12522-Looks-like-I-ve-bricked-it

=> especially at post #43 http://www.freaktab.com/showthread.p...l=1#post174234
BUT normally, if I'm not wrong, there is a little bit of life at the device at this situation...

Maybe you killed it (but both?) during unplugging???

[ficat]

merci pour tout no_spam_for_me
mais helas je n'ai pas resolu le probleme



thank you for all no_spam_for_me
but I have not solved the problem yet
but if you can shaw


if you just tell me what exactly i put in the SD card, because I think the problem is this.
give me a link or else could help me.
In any case I'm testing the device stays dead even short circuiting pin 02 as indicated on the photo of our friend bob.
I'm sure it's a problem especially soft that no fuse and voltage used is 5v

ficat

[no_spam_for_me]

If you talk about the bootcardmarker, you can find it here http://www.tronsmart.eu/downloads/ at 'USB Burning Tool with windows PC' ( http://www.mediafire.com/download/jm...ogic_tools.rar )...
Then you have to unpack the 'amlogic_tools.rar' and also the 'burnBootCard.rar' which you find at the unpack-result and execute the BootcardMaker.exe...
You will also find at http://www.tronsmart.eu/downloads/ the 'How to make the BOOT SD Card:' ...
You will also find the 'usb刷机工具说明.wps' of post #43 (http://www.freaktab.com/showthread.p...l=1#post174234 ) at the 'amlogic_tools.rar' ...