If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
new firmware V2 - old root method not working anymore
BTW:
also TWRP recovery, TWRP-for-Amlogic, cannot be installed anymore in firmware V2- to update to the new firmware V2 I had to install stock recovery first.
At first i could'nt root mine but then i noticed the (factory update param.aml) was still on my usb stick once i had removed that it worked fine
Thank you very much for your superfast and most helpful answer! This solved both problems
I had to do the root process two times and after installing twrp once again, but now it's both working like a charm!
BTW:
also TWRP recovery, TWRP-for-Amlogic, cannot be installed anymore in firmware V2- to update to the new firmware V2 I had to install stock recovery first.
What did it do when you booted to recovery and tried to install it?
Bob
"Pzebacz im, bo nie wiedzą, co czynią"
"Прости им, они не ведают, что творят"
"Perdona loro perché non sanno quello che fanno"
"Vergib ihnen, denn sie wissen nicht, was sie tun"
"Vergeef hen want ze weten niet wat ze doen"
"Pardonne-leur car ils ne savent pas ce qu'ils font"
"Perdónalos porque no saben que lo que hacen"
"Oprosti im, jer ne znaju što čine"
"Forgive them as they know not what they do"
What did it do when you booted to recovery and tried to install it?
Bob
On v2 they are using release keys instead of test keys.
Probably recovery is refusing to install due to keys. It can be workarounded by booting a modified recovery from sd.
There are 10 types of people in the world: Those who understand binary, and those who don't...
What did it do when you booted to recovery and tried to install it?
Bob
when I tired to install the update.zip with the factory_update_param.aml via twrp it said:
error: this update package is for minix x8 - this is a minix x8-h device. after that I installed the stock recovery, then the update to V2 worked.
I tried to root the device, but because of the factory_update_param.aml beeing still in the root directory of the usb stick, it didn't work. after deleting it, it worked after a second try. Finally I installed the latest version of twrp and the theme for 1920x1080 and root didn't worked anymore. I had to root it again and then all was fine.
On v2 they are using release keys instead of test keys.
Probably recovery is refusing to install due to keys. It can be workarounded by booting a modified recovery from sd.
That's what I was thinking but wanted to be sure from the user. My EZ root package did not come with a recovery.img so this can probably be easily fixed by using the previous recovery.img and putting it on SD with the EZ root package.
I am going to have to flash this new Minix ROM and see what's going on.
Bob
"Pzebacz im, bo nie wiedzą, co czynią"
"Прости им, они не ведают, что творят"
"Perdona loro perché non sanno quello che fanno"
"Vergib ihnen, denn sie wissen nicht, was sie tun"
"Vergeef hen want ze weten niet wat ze doen"
"Pardonne-leur car ils ne savent pas ce qu'ils font"
"Perdónalos porque no saben que lo que hacen"
"Oprosti im, jer ne znaju što čine"
"Forgive them as they know not what they do"
I am not fully sure, but a friend of mine have mentioned that the GUFONE Root Method (used to Root Beta8 and Beta9.2), also works with the latest OTA2!
I am not fully sure, but a friend of mine have mentioned that the GUFONE Root Method (used to Root Beta8 and Beta9.2), also works with the latest OTA2!
I just tested my EZ root and it worked just fine on the new firmware. I did a full erase and flash to be sure. So I do not know what the OP's problem was but it still works. Oh and I did not need a old recovery on SDcard either.
Note: the OC certs have not changed for ZIP file signing. It only changed to release keys for build.prop.
Bob
"Pzebacz im, bo nie wiedzą, co czynią"
"Прости им, они не ведают, что творят"
"Perdona loro perché non sanno quello che fanno"
"Vergib ihnen, denn sie wissen nicht, was sie tun"
"Vergeef hen want ze weten niet wat ze doen"
"Pardonne-leur car ils ne savent pas ce qu'ils font"
"Perdónalos porque no saben que lo que hacen"
"Oprosti im, jer ne znaju što čine"
"Forgive them as they know not what they do"
I just tested my EZ root and it worked just fine on the new firmware. I did a full erase and flash to be sure. So I do not know what the OP's problem was but it still works. Oh and I did not need a old recovery on SDcard either.
Note: the OC certs have not changed for ZIP file signing. It only changed to release keys for build.prop.
Bob
Thanks for the info Bob!
Bob, do you are going to build a New Bob Finless ROM, based in this latest Firmware, with all your tweaks and Goodies??
Bob, do you are going to build a New Bob Finless ROM, based in this latest Firmware, with all your tweaks and Goodies??
Working on it now.
FYI I found a boo boo by Minix. They left the needed commands in to support init.d but they did not add the folder to /etc so it wont work. I will fix that and also change this implementation back to the standard naming called init.d not init.
Bob
"Pzebacz im, bo nie wiedzą, co czynią"
"Прости им, они не ведают, что творят"
"Perdona loro perché non sanno quello che fanno"
"Vergib ihnen, denn sie wissen nicht, was sie tun"
"Vergeef hen want ze weten niet wat ze doen"
"Pardonne-leur car ils ne savent pas ce qu'ils font"
"Perdónalos porque no saben que lo que hacen"
"Oprosti im, jer ne znaju što čine"
"Forgive them as they know not what they do"
I think I found why the OP had a problem with my EZ root package. This new recovery is VERY PICKY about the condition of the sdcard. While making my ROM al of a sudden it would not install anymore. It verified and said installing but nothing would happen. It would give no errors just say "installed" and in fact it did not.
Reformatting the sdcard solved that.
Bob
"Pzebacz im, bo nie wiedzą, co czynią"
"Прости им, они не ведают, что творят"
"Perdona loro perché non sanno quello che fanno"
"Vergib ihnen, denn sie wissen nicht, was sie tun"
"Vergeef hen want ze weten niet wat ze doen"
"Pardonne-leur car ils ne savent pas ce qu'ils font"
"Perdónalos porque no saben que lo que hacen"
"Oprosti im, jer ne znaju što čine"
"Forgive them as they know not what they do"
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment