[Solved] Please help me unbrick my ug802 !

[gabb]

So I flashed it with 1.6 rom. Every was fine but stupid me decided to change the playstore using a modified framework.jar.
I restarted and I got it bricked.
Screen stays at "loading..." and does nothing (animations are all there though)

Any how, I tried this method http://www.ovalelephant.com/forum/vi...=1211&start=10

but I can't get it to work and armtvtech website if offline.

Can anyone please help me and tell me how to but this this in recovery mode?

I tried shorting both pads that are marked in the picture on ovalelephant, tried shorting just the one near the nand chip but windows never recognizes anything.


Thanks

EDIT: Ok, so I managed to get it in recovery mode, but now it's not accepting the 1.4 rom update.img.

Hmm.. I think I screwed up because now with the new 1.6 rom it changed everything regarding the SD update.

[gabb]

This is what I'm getting






EDIT

I managed to erase NAND using Bob's tool, but now I'm getting this when trying to flash:

[userx]

Your device is in bootloop.
You have to open the case and do a manual reset.

Here are instructions to help you... it is fixable.
Their are two small d-pad you have to make a connection with.

http://www.freaktab.com/showthread.php?1872-UG802-Bootloop-Help

I'll find a photo of the circuit board.

[gabb]

Ok, so I managed to flash it back,
I had to UNcheck the loader when flashing.

Now it's working again.


But I have another issue: Where's the "old" settings option? The new settings doesn't let me connect the usb to the computer using mass storage like before.

[userx]

Photo of reset pins.

[userx]

Use the reboot app... http://www.freaktab.com/showthread.php?1050-Reboot-App
Load this app onto your device. Then use reboot app... Boot Loader Mode on reboot.

[gabb]

Use the reboot app... http://www.freaktab.com/showthread.php?1050-Reboot-App
Load this app onto your device. Then use reboot app... Boot Loader Mode on reboot.

Thanks userx!

For some reason Bob's tool wasn't accepting the bootloader bin file when flashing.
Everything was working but I didn't want to leave it with that error.

So anyways, I tried flashing, erasing, flashing again with different roms and somehow it finally passed the "test" bob's tool does at the beginning.

Weird!

Anyways, all is good now.

Lessoned learned for me: Don't try methods that work for ICS on JellyBean!

[japspartan]

This is what I'm getting






EDIT

I managed to erase NAND using Bob's tool, but now I'm getting this when trying to flash:

I'm having the same problem as the first picture. Where can i get Bob's flash tool?