UG007 - stuck in endless boot up

[atf678]

JUst tried to turn on my UG007 today and it's stuck on the bootup screen.

Anyone know how to do a recovery or hard reset?

[2dark4u]

JUst tried to turn on my UG007 today and it's stuck on the bootup screen.

Anyone know how to do a recovery or hard reset?

1. Try to connect your UG007 to PC, install drivers and try to use ADB to get recovery mode.
You need to enter only 1 string:
reboot bootloader (it will reboot in bootloader mode) after this You can flash any firmware You like but don't install Finless, You will loose WIFI/BT functionality.


2. open the case and turn on UG007 with short 2 pins near flash chip (not soldered recovery mode button). If You will do all correct your UG007 will go to recovery mode on boot.
Instruction where to short pins You can find in recovery tutorial for UG802. In UG007 these pins on same place.

3. You can make special microSD card, when this card inserted, it brick's UG007 on boot and it will go to recovery mode automatically on reboot(this way for working device).

[atf678]

I have the case opened up and at first it didn't look like the pictures of the UG802 and there were so many solder pads that looked similar. And then I turned the board over.....doh it is virtually identical.

I'm a bit afraid to test other rom's. Would I be able to keep flashing other roms or get back to the original one if I fail or brick it?

All I see are Finless roms for the UG802. What are the other roms that you mentioned that would work?

Thanks for the help.

[2dark4u]

You can install only original UG007 firmware no custom ROM available for now.

[vincenzo697]

original firmware

You can install only original UG007 firmware no custom ROM available for now.

please can someone provide with original firmware for ug007 and a guide to flash as I installed the CWM recovery from ug802 and now I can't get out of it. thanks

[andrea_ita]

Hi friend, i have buy UG007 from one day and after i haev seen a movie, application not respond.
then i power off and on, and now device is blocked at boot "R-BOX".

any idea??????
Firmware , flash, howwW?

[dudu]

Hi friend, i have buy UG007 from one day and after i haev seen a movie, application not respond.
then i power off and on, and now device is blocked at boot "R-BOX".

any idea??????
Firmware , flash, howwW?

Just try another power adapter.

[andrea_ita]

Just try another power adapter.

UGOOS tell me to try another power supply or cable, but same problem!

[antwan]

does anybody able to provide me genuine build.prop from UG007 ?

I modified mine, and backup is corrupted.

Thx for your help

[andrea_ita]

I received today from UGOOS original firmware for UG007 (i'm downloading), but i don't know as flash it.
In ug007 there is no reset button, and wich software and cable i must use???

[Finless]

If you can upload this firmware somewhere, a lot of people are wanting it!
As to flashing it, is there a rest button anywhere on the device? A little pin hole hiding a reset button?

Bob

[andrea_ita]

Where? All sharing server support max 200Mbyte. And the image is 378

If you can upload this firmware somewhere, a lot of people are wanting it!
As to flashing it, is there a rest button anywhere on the device? A little pin hole hiding a reset button?

Bob

[andrea_ita]

Finless look at thread http://www.freaktab.com/showthread.p...ginal-firmware

We trying a lot of firmware, all work but Wifi and BT NO.
I'm waiting my seller support. When I find good firmware I post immediatrly IT.

[Finless]

Where? All sharing server support max 200Mbyte. And the image is 378

Google Drive or Dropbox!
Just PM me the link please as if you post it in public in 30 minutes it will be banned!

Bob

[andrea_ita]

This night I upload it.

Google Drive or Dropbox!
Just PM me the link please as if you post it in public in 30 minutes it will be banned!

Bob