3 M8 Amlogic S802 devices without ethernet network!

[snotzilla]

Hi,

Like the title says, I got 3 m8 boxes with no ethernet connect after flashing. I tried justme, stane1983, codesnake's roms without any succes. Also stock roms tested without any succes. If i check/uncheck the box, you see no ip only "disconnected".

Can someone tell me what I do wrong?


Thanks

regards,
Snotzilla

[blinkone]

Hi,

Like the title says, I got 3 m8 boxes with no ethernet connect after flashing. I tried justme, stane1983, codesnake's roms without any succes. Also stock roms tested without any succes. If i check/uncheck the box, you see no ip only "disconnected".

Can someone tell me what I do wrong?


Thanks

regards,
Snotzilla

Hi you are in the wrong thread are your box's round or square & I will move you to the right place where you should get more help.


Blinkone

[snotzilla]

square


thnx!

[JustMe]

square


thnx!

try this http://www.freaktab.com/showthread.p...l=1#post191442

do you even get any lights blinking on the back ? you may even have faulty Ethernet ports

[snotzilla]

try this http://www.freaktab.com/showthread.p...l=1#post191442

do you even get any lights blinking on the back ? you may even have faulty Ethernet ports

Cable and port must be good, because with static ip I got internet, till i reboot then the box lose his settings.

[JustMe]

seem like an issue with the firmware

[snotzilla]

seem like an issue with the firmware

Tried more then 10 firmwares without any succes!

is there any solution to fix it?

To make a boot.bin with mac or something els?

[JustMe]

Tried more then 10 firmwares without any succes!

is there any solution to fix it?

To make a boot.bin with mac or something els?

can you take picture inside of your box pcb want to see what chip you have. the firmware you posted has no ethernet on my original m8 I tested it.

[snotzilla]

it looks like a s802b device

[JustMe]

[ATTACH=CONFIG]10887[/ATTACH]

sorry m8 can you look under the circuit board and tell me if its ap6330?, I will upload firmware and post you a link i have modded it and ethernet now works with my original m8 box

[snotzilla]

sorry m8 can you look under the circuit board and tell me if its ap6330?, I will upload firmware and post you a link i have modded it and ethernet now works with my original m8 box

yes, its a ap6330 circuit, can you tell me what the different is with the other box (firmware)?

thanks for your time and your great work!

[JustMe]

yes, its a ap6330 circuit, can you tell me what the different is with the other box (firmware)?

thanks for your time and your great work!

back in 20min when upload is finished

http://bit.do/JustMe-Snotzilla

added to post to stop PM's:

its a stocker with the ethernet fix only, i have stripped all preinstall apps and only left aptoide to save bandwidth. and no tweaks or performances done

[snotzilla]

back in 20min when upload is finished

http://bit.do/JustMe-Snotzilla

added its a stocker with the ethernet fix only, i have stripped all preinstall apps and only left aptoide to save bandwidth.

thnx, I will give it a try!

[snotzilla]

still the same problem

ethernet disconnected!

[snotzilla]

with openelec via ssh

ifconfig eth0 hw ether XX:XX:XX:XX:XX:XX

this commando works, till i reboot (then i can use internet without problems)
there are problems with network config.

after reboot it lose all network settings.