Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

Mk 808 loading loading loading but ....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Mk 808 loading loading loading but ....

    First of all, greetings to all.
    I'm sorry for my english. I'll try to explain my trouble here:
    I've bought mk 808 on geekbuing… for 4-5 days it works good but yesterday, after a crash of playstore, i've turned off the key tv and after that the key has stopped in the booting screen ( when appear the "android" logo).
    how can I fix it?




    this is my situation:
    on top-sx there is the psu
    then there is my configuration, whitout micro-sd or hdd
    then the screen when mk stops,
    and then there is the logo of reset mode...after that ( 1 minute) the system reboots and stops.
    I tried to use moborobo but I can't put mk in debug mode because it stops on screen of boot!
    Tnx to all

    #2
    That lay down Android man with the red symbol means your ROM got corrupt. You will need to flash a ROM to fix it.

    Bob
    "Pzebacz im, bo nie wiedzą, co czynią"
    "Прости им, они не ведают, что творят"
    "Perdona loro perché non sanno quello che fanno"
    "Vergib ihnen, denn sie wissen nicht, was sie tun"
    "Vergeef hen want ze weten niet wat ze doen"
    "Pardonne-leur car ils ne savent pas ce qu'ils font"
    "Perdónalos porque no saben que lo que hacen"
    "Oprosti im, jer ne znaju što čine"
    "Forgive them as they know not what they do"





    Comment


      #3
      Originally posted by Finless View Post
      That lay down Android man with the red symbol means your ROM got corrupt. You will need to flash a ROM to fix it.

      Bob
      Yes I know.. But how?? I can't acces at debug mode and Windows can't recognizes the key-tv... Tnx

      Comment


        #4
        Originally posted by andr3a View Post
        Yes I know.. But how?? I can't acces at debug mode and Windows can't recognizes the key-tv... Tnx
        Very simply - for flash better use flashing tools /see thread about mk808 finless rom 1.5A / ,download and unzip software into computer,then use paper clip for resetting your MK808 /without power!/,hold down reset button and connect MK808 to computer /usb cable must be connected into OTG port-NOT USB-MK808// If computer say "found new hardware...",release reset button , install drivers and flash to Finless 1.5A-this Rom is very amazing and stable /for details,read instrucions into text file/. Because original Rom is very unstable and have bugs /fragmented , unstable synchro A/V etc../ is normally,when you MK with this Rom crashed after few hours....I has same problem - Finless rom is very good..GoodLuck!
        PS- reset buton is available until think hole on side MK808 without logo
        Last edited by prokji; 30 November 2012, 17:49.

        Comment


          #5
          Originally posted by prokji View Post
          Very simply - for flash better use flashing tools /see thread about mk808 finless rom 1.5A / ,download and unzip software into computer,then use paper clip for resetting your MK808 ,hold reset button and connect MK808 to computer /usb/ If computer say "found new hardware...",release reset button , install drivers and flash to Finless 1.5A-this Rom is very amazing and stable /for details,read instrucions into text file/.

          Ok, but for me the problem is to istall driver of mk808 because I can't put mk in debug mode!!!!

          Comment


            #6
            You dont need debug mode. You put it into flash mode using reset button and USB cable. In my ROm are full instructions.

            Bob
            "Pzebacz im, bo nie wiedzą, co czynią"
            "Прости им, они не ведают, что творят"
            "Perdona loro perché non sanno quello che fanno"
            "Vergib ihnen, denn sie wissen nicht, was sie tun"
            "Vergeef hen want ze weten niet wat ze doen"
            "Pardonne-leur car ils ne savent pas ce qu'ils font"
            "Perdónalos porque no saben que lo que hacen"
            "Oprosti im, jer ne znaju što čine"
            "Forgive them as they know not what they do"





            Comment


              #7
              Thank you very very much!
              Now my mk808 works!!!



              Originally posted by Finless View Post
              You dont need debug mode. You put it into flash mode using reset button and USB cable. In my ROm are full instructions.

              Bob

              Comment

              Working...
              X