Rom and kernel Arnova 10d G3.

[tomfon87]

Hello and congratulations for the Forum.
I recently purchased a Tablet Arnova 10d G3 and would like to put on a new rom and kernel.
What do you recommend?
How do you get into recovery mode??
Thank you.
Translated with google ..

[neomode]

What we need is a Rom Dump of the Tablet.
Then we can make a Rom for it.
Recovery Mode can reach with a App From Play Store.

If you need Help tell me.

Cia

Neomode

[snakekiller]

Hello and congratulations for the Forum.
I recently purchased a Tablet Arnova 10d G3 and would like to put on a new rom and kernel.
What do you recommend?
How do you get into recovery mode??
Thank you.
Translated with google ..

look here this is for installing the flash drivers
http://www.freaktab.com/showthread.p...s-for-flashing!
for the 10BG3 is it volume up + power button (@the same time) and then with a needle hit the reset hole.
do this when the tablet is connected to the pc.

[snakekiller]

What we need is a Rom Dump of the Tablet.
Then we can make a Rom for it.
Recovery Mode can reach with a App From Play Store.

If you need Help tell me.

Cia

Neomode

you can download the original rom from here

http://arnovatech.com/support/firmware/3/arnova10dg3/121031/ARNOVA_10d_G3_20121031.zip

[tomfon87]

What we need is a Rom Dump of the Tablet.
Then we can make a Rom for it.
Recovery Mode can reach with a App From Play Store.

If you need Help tell me.

Cia

Neomode

dump the ROM you find here: http://arnovatech.com/support/firmwa...3_20121031.zip
With regard to the recovery I installed Rom Manager and it says it is not compatible no ClockworkMod recovery.
Can you tell me which app to install??
Thanks

[tomfon87]

look here this is for installing the flash drivers
http://www.freaktab.com/showthread.p...s-for-flashing!
for the 10BG3 is it volume up + power button (@the same time) and then with a needle hit the reset hole.
do this when the tablet is connected to the pc.

If I press at the same time the volume + power button and reset nothing happens.
Help!!!

[tattman65]

to put the tab in flash mode just press volume up hold it and while holding push the reset with a paperclip just for a second and then release volume after .

[snakekiller]

If I press at the same time the volume + power button and reset nothing happens.
Help!!!

the tablet stays on a black screen if it is on flashmode.
just like it is power off

[neomode]

As i know @ the Moment there is no CWM avabile.
I downloaded the Orginal Rom and will do the Root on the Firmware.

Neomode

[tomfon87]

to put the tab in flash mode just press volume up hold it and while holding push the reset with a paperclip just for a second and then release volume after .

1) I turned off the tablet
2) while I pressed volume + I hold reset for 1 second.
But nothing happens ....

[tattman65]

it will look like nothing happens , but in fact you are in flash mode .

have your tab plugged up to the computer and see if it is recognised by the pc

neo said he is going to do a root on the firmware he downloaded so wait till he posts and then you can go from there ok . we can get you through it .don't worry.

[rrileypm]

I'm wondering if the "d" version is using a different processor than the "b" version. I'm reading that Arnova is starting to use different CPU's.

You might check...cause our ROM will only work for the Rockchip.

[neomode]

Thank´s. I have Download the Orginal Firmware. It´s the Orginal Wondermedia System.
Very Crappy :-(

Neomode

[neomode]

Custom Rom 10 d G3

Hello,

The Custom Rom is finished.
Download here.

http://www.freaktab.com/showthread.php?3294-10-d-G3-*root*-Rom

Neomode

[Sylaous]

Rom for 10c g3?

is there any info for the 10c g3 tablet. That was was sent to me as a replacement for my broken 10b.