Hi there,
has anybody experience with MK808 and 3G dongle ?
Would it be possible to establish a 3G connection ?
has anybody experience with MK808 and 3G dongle ?
Would it be possible to establish a 3G connection ?
-
-
I have tested many 3G dongle, but not OkOriginally posted by wlq100 View Post -
Solved
I just found out, that a 3G connection is working (with Finless 1.5A) . For my tests I used HUAWEI E 1750C 3G dongle. I am sure others will work as well. It seems, that it is necessary to turn of the PIN request first with the help of a mobile phone. Then connect dongle with USB port and reboot MK808. Turn off wifi and switch on 3G with Settings->Data usage->Mobile data on. After that a 3G signal icon was visible in the status bar and it was possible to choose an Access Point Name (APN) from More...->Mobile network settings.Comment
-
Yes this right, if some 3G Data Sticks not Work you need a new USB Switch Entry
tho Android knew what to do :-)
Neomode
Comment
-
Only certain models (chip sets) are support by android.
I have tried the Huawei E1750 and Huawei E160e (unlocked) and they connected and I sucessfully surfed the web (rom Finless 1.6).
These models are old (so cheap on ****) as I used them on my old android tablet.Comment
-
AW: MK808 3G UMTS
Maybe, because newer 3G Data Stick also Work but you need the right rule for USB Config so Android can Switch the Stick from Zero Conf to Data mode. Sometimes it is better also to Disable Pin Unlock for the Card.
Neomode
Gesendet von meinem HTC HD2 mit Tapatalk 2
Comment
-
On my old android tablet (Ployer Momo9) a list of supported device were listed. I have three 3g doggles and the two which of were on the supported list worked on the MK808. You may have better luck trying one of the following (sorry they are old).
Comment
Comment