Bricked?

[[email protected]]

Unable to get my Imito mx1 to take new firmware..

Here's what I get
(screen shot of RKAndroidTool)
before attempt (showing chip detected, Maskrom mode)
http://prntscr.com/tmpig



logfile:

13:21:29 976 Load Setting ok
13:21:30 021 Finless ROM Flash Tool - RKAndroidTool v1.3.5.0 Start Run
13:21:30 023 Scan thread:6920
13:21:30 025 Infothread=7264)IoControlProc-->DeviceIoControl In
13:21:30 026 Infothread=7264)IoControlProc-->DeviceIoControl Out,ret=1,err=183
13:21:30 050 ProcessID:3412,ThreadID:6384,RefCount:0
13:21:30 051 ProcessID:3412,ThreadID:6920,RefCount:0
13:21:31 191 INFO:Start to erase NAND
13:21:36 247 ERROR: DeviceIoControl failed. bRet=1,err=0,dwReturnByte=4096,nSendBytes=0,dwTota lSended=1635076
13:21:36 249 ERRORownload USBData failed
13:21:36 250 ERRORownload boot failed
13:21:50 136 MaskRom Device Path(\\?\USB#VID_2207&PID_300A#5&1B835FCA&0&7#{a5d cbf10-6530-11d2-901f-00c04fb951ed}),threadID=7136
13:21:50 137 INFO:Start to run
13:21:50 139 INFO:Start to download boot
13:21:55 194 ERROR: DeviceIoControl failed. bRet=1,err=0,dwReturnByte=4096,nSendBytes=0,dwTota lSended=1634496
13:21:55 196 ERRORownload USBData failed
13:21:55 197 Errorownload boot failed
13:21:55 200 ERROR:MaskRomThread failed
13:21:55 202 ERROR:Run failed
13:21:56 924 Info:wait for exiting scan thread start
13:21:57 080 Info:wait for exiting main thread start
13:21:57 101 ProcessID:3412,ThreadID:6384,RefCount:0


I've tried 4 different PC's with 3 different cables.. all plugged into the 'real' usb ports on the back of the motherboard with similar results..

Any Ideas what to try next?

[Spheeler]

Re: Bricked

Unable to get my Imito mx1 to take new firmware..

Here's what I get
(screen shot of RKAndroidTool)
before attempt (showing chip detected, Maskrom mode)
http://prntscr.com/tmpig



logfile:

13:21:29 976 Load Setting ok
13:21:30 021 Finless ROM Flash Tool - RKAndroidTool v1.3.5.0 Start Run
13:21:30 023 Scan thread:6920
13:21:30 025 Infothread=7264)IoControlProc-->DeviceIoControl In
13:21:30 026 Infothread=7264)IoControlProc-->DeviceIoControl Out,ret=1,err=183
13:21:30 050 ProcessID:3412,ThreadID:6384,RefCount:0
13:21:30 051 ProcessID:3412,ThreadID:6920,RefCount:0
13:21:31 191 INFO:Start to erase NAND
13:21:36 247 ERROR: DeviceIoControl failed. bRet=1,err=0,dwReturnByte=4096,nSendBytes=0,dwTota lSended=1635076
13:21:36 249 ERRORownload USBData failed
13:21:36 250 ERRORownload boot failed
13:21:50 136 MaskRom Device Path(\\?\USB#VID_2207&PID_300A#5&1B835FCA&0&7#{a5d cbf10-6530-11d2-901f-00c04fb951ed}),threadID=7136
13:21:50 137 INFO:Start to run
13:21:50 139 INFO:Start to download boot
13:21:55 194 ERROR: DeviceIoControl failed. bRet=1,err=0,dwReturnByte=4096,nSendBytes=0,dwTota lSended=1634496
13:21:55 196 ERRORownload USBData failed
13:21:55 197 Errorownload boot failed
13:21:55 200 ERROR:MaskRomThread failed
13:21:55 202 ERROR:Run failed
13:21:56 924 Info:wait for exiting scan thread start
13:21:57 080 Info:wait for exiting main thread start
13:21:57 101 ProcessID:3412,ThreadID:6384,RefCount:0


I've tried 4 different PC's with 3 different cables.. all plugged into the 'real' usb ports on the back of the motherboard with similar results..

Any Ideas what to try next?

What firmware are you currently running? and are you trying to put finless 1.5 on ?
You could try to upgrade/downgrade to a different firmware via Micro sd card with .img

[[email protected]]

What firmware are you currently running? and are you trying to put finless 1.5 on ?
You could try to upgrade/downgrade to a different firmware via Micro sd card with .img

I've tried Finless 1.5 and 1.6 and I've also tried stock, and pre-rooted img via SD card and using rkbatchtool
there's no video so can't really tell that SD card method has any success or failure other than just sitting there..