MK809II ICUBE - How to Install custom rom ???

[shootomanUK]

HI all, i would like some help in installing a custom rom on my mk809II
now i cant find a thread on here specifically for this device, but i have found that someone has installed finless 1.7a imito mx1/2 rom onto the device.

however i have downloaded the rom, connected the device to pc, disabled debugging, enabled mass storage, and enabled pc connection.

but in the Rom Flash Tool.exe i get "no found RKandroid usb" and cant install the drivers ??

is this the right method for this device ? or am i missing something ?


Thanks for you help

[darekmarta1975]

Press the hole is so small.

[shootomanUK]

Press the hole is so small.

i see a small hole near sd slot, but there is nothing behind it, no button etc ?

[darekmarta1975]

so this hole, there is a button
replace it with a needle
you press start to install drivers

[shootomanUK]

so this hole, there is a button
replace it with a needle
you press start to install drivers

there is no button, its just a hole with nothing behind ???

[darekmarta1975]

so there is the.
Insert the needle,you feel it

[boyzie]

so there is the.
Insert the needle,you feel it

Didnt think there was a button on the my Icube mk809ll but just took it apart and there sure is one in line with that tiny hole about an inch away from the sdcard.......

[shootomanUK]

Ok I opened the device up last night, I found a small button on the opposite side of the device, nowhere near the hole
Ive not tried flashing it yet thoug as it was late, il try
and upload some pictures so I can show you where I found the button :-)

[boyzie]

Ok I opened the device up last night, I found a small button on the opposite side of the device, nowhere near the hole
Ive not tried flashing it yet thoug as it was late, il try
and upload some pictures so I can show you where I found the button :-)

You was prob holding it upside down shootmanuk,only joking... Can you let us know wot rom u flashed and what advantages it gives if any when you do it...Thanks.Tbh Ive found no probs with the stock rom Jellybean 4.1.1. tho I did flash CWM mainly because you can do it from the sd card.

[shootomanUK]

i checked my device again and the button is definatley on the other side of the device and not near any hole, its impossible to press without taking the unit appart, maybe a manufacturing error in the process of being made,
anyway i tried to flash again by connecting the device to pc and ran the Rom flash tool.exe, then i pressed the button waiting for the application to recognise my device to install the drivers, but nothing happens ?

can anyone provide a guide to flashing the mk809II, please bear in mind i have been using the instructions with the imito mx2 rom so that might be why its not working ?


edit: just been looking at the circuit board on the device and it is printed with "MK806 v1.0" ??

that cant be right though can it ? ithought the mk806 dont have bluetooth ?